How to set up the remote to the TV Xiaomi: full instruction with codes and tips

Why the remote control of Rostelecom may not work with Xiaomi TV and what to do about it

Connecting the universal remote from Rostelecom to the Xiaomi TV is a challenge that many interactive TV users face. The problem is that manufacturers use different control protocols, and standard codes from the instructions are often not suitable for smart TVs on Android TV. In this article, we will analyze working synchronization methods, current codes for popular Mi TV models (including Mi TV 4S, Mi TV 5, Mi TV A2), as well as typical errors that cause the remote to refuse to work.

It is important to understand that Rostelecom’s universal remotes (STB-100, STB-200, RT-BR104, and others) are originally designed for consoles, not direct commands to TVs. However, they can be reprogrammed if you know the right sequence of actions. We tested all methods on the current firmware Xiaomi TV 2023-2026 — below only proven solutions.

What Xiaomi TV models support the Rostelecom remote

Not all Xiaomi TVs sync equally well with remotes from Rostelecom. Here is a list of models for which it is confirmed to work:

• 📺 Mi TV 4S (all diagonals: 32, 43, 50, 55, 65) – supports most codes, but may require manual input.
• 📺 Mi TV 5 and Mi TV 5 Pros – best used with protocol NEC, codes 0000 or 0001.
• 📺 Mi TV A2 (2023–2026 – requires firmware updates to version MIUI TV 3.0+ work-in.
• 📺 Mi TV P1 mi TV Q1 — Support universal remotes, but can block some buttons (e.g. Guide or other buttons). VOD).

Exceptions: Xiaomi TVs based on Google TV (such as Mi TV Q2) often conflict with remotes Rostelecom due to firmware limitations, in which case it is recommended to use the original remote or the Mi Remote application.

How to connect the remote Rostelecom to Xiaomi TV

There are three main synchronization methods, and you can choose the one that suits the remote and the TV.

1. Automatic code search - the remote itself sorts out possible combinations, suitable for most universal remotes by Rostelecom.
2. Manual code entry – you enter the digital code for your Xiaomi TV model.
3. Button learning — the remote simulates signals from the original Xiaomi remote, requiring both remotes.

Let us examine each method in detail.

Method 1: Automatic code search

This is the easiest way, and it works 60 to 70 percent of the time.

1. Turn on the Xiaomi TV and point the remote to it Rostelecom.
2. Press the TV and OK buttons on the Rostelecom remote at the same time until the red indicator lights up (usually 3-5 seconds).
3. Release buttons – the indicator should flash, signaling the search mode.
4. Press the Power button on the Rostelecom remote and hold it until the TV turns off.
5. After turning off the TV, release the Power – the remote will save the code.
6. Check the other buttons (Volume+/-, CH+/-, Menu).

If the TV doesn’t respond to Power within 10-15 seconds, then the automatic search didn’t work – go to manually entering the code.

💡

If the Rostelecom remote does not respond to TV + OK, try the TV + MUTE combination - some models use it to enter programming mode.

Method 2: Manual code entry for Xiaomi TV

If the automatic search didn’t work, enter the code manually. Below is a table of current codes for different Xiaomi TV models:

Instructions for manual input:

1. Turn on the Xiaomi TV.
2. On the Rostelecom remote, press TV and OK until the indicator lights up.
3. Enter a 4-digit code from a table (e.g., 0001).
4. Press OK to save.
5. Check the Power button – if the TV is turned off, the code fits.

If none of the code worked, try an alternative method of learning buttons.

Make sure the batteries in the remote are new

The remote is directed directly to the IR receiver of the TV (usually at the bottom right)

There are no active blockages on the TV (e.g. parental controls)

Try entering codes with a pause of 1-2 seconds between numbers-->

Method 3: Learning buttons (copying signals)

This method requires the original remote from Xiaomi, which is suitable if standard codes do not work or you need to reassign specific buttons (for example, Netflix or Prime Video).

Instructions:

1. Place both remotes (original Xiaomi and Rostelecom) "face" each other at a distance of 2-3 cm.
2. On the Rostelecom remote, press TV and OK until the indicator lights up.
3. Press the button on the remote Rostelecom that you want to configure (for example, Volume+).
4. On the original Xiaomi remote, press the corresponding button (Volume+) and hold until the indicator on the Rostelecom remote blinks 2 times.
5. Repeat steps 3-4 for all the buttons required.
6. Press OK on the Rostelecom remote to save the settings.

This method takes longer, but guarantees 100% compatibility, since the Rostelecom remote literally copies the signals of the original remote.

Common Problems and Their Solutions

Even after successful synchronization, Rostelecom's remotes may not work properly, and here are the typical problems and ways to fix them:

• ❌ The remote turns on the TV but does not control the volume → Reprogram the buttons Volume+/- through training or try another code from the table.
• ❌ Not all buttons work (for example, Menu does not open) → Some Xiaomi models TV They block access to system settings through universal remotes. Use the original remote or Mi Remote app.
• ❌ The remote works only from close range. → Check the IR port on your TV (may be contaminated) or replace the batteries in the remote control.
• ❌ After updating the firmware remote stopped working → Reset the remote settings (TV + MUTE + POWER) and repeat the synchronization.

Critical feature: Xiaomi TVs based on Google TV (for example, Mi TV Q2) can block universal remotes at the system level, in this case, the only way out is to use the original remote or connect Rostelecom via Bluetooth (if the remote model supports this).

⚠️ Attention: If after synchronization, Rostelecom starts spontaneously switching channels or changing the volume, this is a sign of an IR conflict. Disable other IR devices in the room (air conditioning, music center) or reconfigure the remote to another code.

How to check what protocol is used in your Xiaomi TV

If the standard codes don't work, your Xiaomi TV may use a custom control protocol to determine:

1. Download the IR Universal Remote (Android) or AnyMote (iOS) app on your smartphone.
2. Select the "Protocol Definition" function in the application.
3. Point the original Xiaomi remote to the smartphone’s camera and press any button (like Power).
4. The application will show the protocol used (NEC, RC5, RC6, etc.).

Knowing the protocol, you can:

• 🔍 Choose the code from extended tables (for example, for RC6 Codes 0025-0030 are often used).
• 🔧 Use dedicated remotes with support for the desired protocol (for example, BroadLink) RM4 Pro).

For Xiaomi TVs, the most common protocols are NEC (80% models) and RC5 (15%), and RC6 (usually in newer models from 2026) is rare.

Alternative ways to manage Xiaomi TV without the remote Rostelecom

If synchronization fails, consider alternative options:

• 📱 Mi Remote is the official app from Xiaomi to control the TV over Wi-Fi or Bluetooth.
• 🎮 Game controllers – some models (e.g., Xiaomi Game Controller) can be connected via Bluetooth and used for navigation.
• 🖱️ Mouse and keyboard - through USB Bluetooth (supported in Mi) TV 5 and newer).
• 🔄 Universal Bluetooth-enabled remotes, such as Xiaomi Mi Remote Bluetooth or Logitech Harmony.

If you use the console Rostelecom, you can configure control via HDMI-CEC:

1. Go to TV settings: Settings → Devices and accessories → HDMI-CEC.
2. Enable HDMI Manage (can be called Anynet+ or Simplink).
3. Now the console Rostelecom will partially control the TV (on / off, volume).

⚠️ Attention: When in use HDMI-CEC Some functions (such as access to the Menu TV) may be blocked, and this method only works when the TV is active. HDMI-prefix.

💡

If none of the methods worked, check if the IR port is turned off in the settings of the TV. To do this, go to Settings → About → Special features → IR port and make sure that the option is turned on.

FAQ: Frequent questions about setting up the remote by Rostelecom to Xiaomi TV