Rostelecom’s integration with Xiaomi’s modern smart TV often raises questions for users who want to control all equipment with one remote. The standard situation of having to hold two devices in your hands — for IPTV and for Android TV itself — causes inconvenience in operation. Fortunately, most operator remotes are equipped with a programming feature that allows you to copy volume and power control commands directly to the console.
The setup process depends on your remote model, as the company uses different input device modifications in different regions and at different times. In this article, we will look at universal synchronization methods relevant to RT-P1, RT-P2 and newer versions with voice control, you will learn how to enter special manufacturer codes and use automatic search mode for accurate calibration.
Before you start programming, make sure that the remote has fresh batteries installed, and the Xiaomi Mi TV or Redmi TV is plugged in and is in standby or active mode. The infrared port (IR port) on the TV should be free of dust and foreign objects, as it is through it that encoded signals are transmitted. A slight delay in reaction on the first start is normal for budget matrixes.
⚠️ Warning: Before setting up, make sure you are no more than 3 meters away from the TV and nothing blocks direct visibility between the remote and the signal receiver.
Definition of the remote model by Rostelecom
The first step is to identify the device accurately, as the combinations of buttons to enter programming mode may differ. Carefully inspect the back of the remote or its front panel for marking. Usually the model is indicated next to the barcode or at the bottom of the case in fine print. For Xiaomi TVs, the most common are the RT-P series consoles and their modifications with Bluetooth support.
Modern Rostelecom remotes often have a separate TV button that serves as a mode switch. If you have such a button on your device, then the third-party control function is already built into it at the hardware level. In older models, you need to pin a key combination, such as “OK” and a number, or special hidden combinations, to activate the training mode.
- 🔍 Inspect the back cover of the remote for a sticker with the model (for example, RT-P1, RT-P3).
- 📺 Find the mode switch button «TV» or «AV» top-of-keyboard.
- 🔋 Check the indicator: when pressing the buttons, it should light up, which indicates the serviceability of the IR emitter.
If the visual inspection failed, try pressing the TV button. If the LED on the remote blinked once, you switched to TV control mode, which confirms that the device supports the necessary functions to pair with Xiaomi. Otherwise, your remote may be from an outdated generation without a learning function.
⚠️ Note: Do not confuse voice control (with a microphone) and standard IR panels; their setting methods can vary significantly due to different signal architectures.
Preparatory actions before setting up
The success of programming depends largely on the correct preparation of the equipment. Xiaomi TVs are based on the Android TV operating system, which has its own characteristics of reaction to external IR signals. It is recommended to temporarily turn off the power saving functions of the remote in the TV if such settings are available on the menu so that the device does not go into sleep mode during the process.
It is also important to ensure stable power to the remote with Rostelecom. Weak battery charge can cause the IR port to emit a signal of insufficient power, and the TV simply “will not see” the commands. Use only new alkaline batteries, avoiding mixing of batteries from different manufacturers or degrees of discharge.
☑️ Checking before programming
Arrange the remote and the TV so that there is direct visibility between them. Make sure that the TV screen does not run heavy applications that can cause a delay in the system's response to commands. If you use an external sound system connected via ARC or Optical, set up the volume control of the TV itself first, and then sync it to the soundbar.
Configuring method using manufacturer codes
The most accurate and quickest way to set up is to manually enter a digital code that matches your TV brand. For Xiaomi and Redmi, Rostelecom has a number of special combinations in its remote database, which allows you to immediately get a working set of commands without having to go through hundreds of options manually.
To enter programming mode, you usually need to press the TV button for a few seconds until the indicator lights up with a constant light or flashes twice. Then, sequentially enter the code digits. If the code is suitable, the TV should turn off or change the volume. The table below shows the most common codes for Chinese TVs used by the operator.
| Code. | Probability of success | Region of utilization | Note |
|---|---|---|---|
| 0292 | Tall. | Europe/CIS | The basic code for Xiaomi |
| 0178 | Medium | Asia | Alternative code |
| 0544 | Medium | Global | For Redmi models |
| 0030 | Low. | Old models | For the first versions of Mi TV |
After you enter the four-digit code, press the TV or OK button to save the result. The remote indicator should flash several times to confirm the recording in memory. Check the main functions: on/off, volume control and switching Input sources. If the TV responds incorrectly, repeat the procedure with another code from the list.
What if no code is available?
Automatic search of control code
If manual code entry fails, you can use automatic matching, which takes longer, but is effective when the exact model of Xiaomi TV is not in standard tables or uses a non-standard IR protocol.
To start automatic search, press the TV button until the indicator flashes in special mode (usually slowly). Release the button and point the remote to the TV. The device will start sending on signals. Once the TV responds (turns off or changes volume), immediately press any button to stop searching and fix the current code.
It can take 2 to 5 minutes, because the code base is so large, and it's important to keep the remote still and keep it pointing at the receiver, and if the TV is gone to sleep while you're searching, wake it up with the regular remote and keep setting up. This method is particularly useful for hybrid devices where Xiaomi uses the same method. OEM-matrixes of other manufacturers.
- 🕒 Be patient: a complete search of codes can take up to 5 minutes.
- 🛑 Be ready to hit the stop button immediately as soon as the TV reacts.
- 🔄 If the search goes to the end without a result, repeat the procedure, but keep the remote closer to the TV.
⚠️ Warning: During automatic search, the TV may randomly change volume or channels – this is a normal behavior, indicating the work of the selection algorithm.
Customize power and volume buttons separately
In some cases, global tuning of all buttons is either unnecessary or impossible, and the user only needs to program specific functions, such as turning on and adjusting sound. Rostelecom remotes allow you to train individual keys by copying the signal from the native remote of the Xiaomi TV, this mode is called “learning”.
To enter training mode, press the button combination (often "TV" + "OK" or a special hidden button) to double blink the indicator. Select the button on the console you want to program (for example, "Loudness +"). Hold the native remote from the TV close to the console "face to face" at a distance of 2-3 cm and press the corresponding button on the native console.
Rostelecom's remote indicator should flash quickly to read the signal. After successfully copying, press "TV" to save. Repeat the procedure for all the necessary buttons: turn on, turn off, volume and possibly select the signal source. This method guarantees 100% compatibility, since you copy exactly the signal that your particular TV understands.
💡
When training buttons, try not to press them too often and quickly, pause 1-2 seconds between presses so that the IR port has time to process signals.
Solving common problems and failing settings
Even with accurate follow-up, there may be situations where the remote is unstable or no longer responsive to the Xiaomi TV, often caused by a software failure in the console itself or a conflict of IR ports addresses, in which case a complete reset of the remote settings to factory values helps.
Resets usually require a specific key combination (e.g., OK + Cancel or 1 + 3) to be pressed for 5-10 seconds until the indicator flashes three times, after which all the programmed codes are deleted and the setup procedure has to be reset, and it is also worth checking whether the IR receiver of the TV is closed with a protective film or decor elements.
If problems persist, it may be hardware. IR diodes in remotes have limited resource, and in Xiaomi TVs, the receiver can be located outside the box (right, left or bottom). Try changing the angle of the remote. In rare cases, it helps to update the firmware of the console itself by Rostelecom through the system settings menu.
💡
If none of the methods worked, try using the remote app on your smartphone with an IR port to check the serviceability of the Xiaomi TV receiver.