How to set up the remote from the Xiaomi TV: full instructions with solutions to problems

The remote from the Xiaomi TV is not just a device for switching channels, but a full-fledged control center for your smart functions. TV-prefix TV. However, many users have difficulty setting up the first setup: the remote does not respond, the buttons are not working correctly, or the TV does not see the device at all. In this article, we will discuss all the ways of setting up, from basic synchronization to solving complex connection problems.

Xiaomi’s remotes come in three types: infrared, Bluetooth, and Mi Remote, which combine both types of connectivity, each requiring a different approach to setup, and if you just bought a Mi TV 4S, Mi TV Q2, or Mi Box S, this guide will help you avoid the typical errors and save time.

We will also look at what to do if the remote stopped working after updating the firmware, how to reset it to factory settings and what alternative ways to control it exist (for example, via a smartphone).

Xiaomi Remote Types: What Do You Have?

Before you start setting up, it's important to determine which remote is bundled with your TV, and how you connect and what problems you might have.

Here are the three main types:

• 📺 The original IR remote is the simplest option, it runs on an infrared channel. It requires the line of sight of a TV. It is found in budget models. TV 4A, Mi TV 4C).
• 🔵 Bluetooth remote is a wireless device that doesn't require direction. TV Q1, Mi TV ES It's also a newer model, and it supports voice control.
• 🎛️ Universal Mi Remote - combines IR and Bluetooth, can control not only the TV, but also other equipment (air conditioning, audio system.

How do you know your type? Look at the bottom of the remote.

• If there is an infrared transmission (a small glass window), it is an IR remote.
• If the case says Bluetooth or there is a microphone button, it is a Bluetooth model.
• If the remote is synced through the Mi Home app, it is a universal version.

If you are not sure, check the TV model in the settings: Settings → About TV → Model. For example, the Mi TV P1 uses a Bluetooth remote, and for the Mi TV 4S 32, the IR.

Setup IR-cooler Xiaomi: step-by-step instructions

The IR panels don't require complex synchronization, but they may sometimes fail due to batteries running out or misdirecting. Here's how to set it up from scratch:

1. Check the batteries. Insert new batteries (usually AAA) and make sure they are installed correctly (observe the polarity of + and −).
2. Point the remote to the TV. Hold it at a distance of 1-3 meters at an angle of 30-45 degrees to the IR receiver (usually located at the bottom of the screen).
3. Press and hold the Power button for 5-10 seconds until the TV reacts.
4. If the TV doesn’t turn on, try pressing Menu + OK at the same time for 3 seconds – this will reset the remote settings.

If the remote is still not working:

• 🔦 Check the IR transmitter on the remote with your smartphone camera: point the remote to the camera and press any button. If the transmission works, you'll see a purple flicker.
• 🔄 Reboot the TV: Turn it off for 1 minute, then turn it on again.
• 📦 If nothing helps, reset the TV to factory settings: Settings → System system → Reset.

⚠️ Note: If you use an IR remote from another appliance (such as an air conditioner), it won’t work with a Xiaomi TV without additional setup via the Mi Remote app.

Connecting Bluetooth remote to Xiaomi TV

Bluetooth remotes are more reliable, but they require synchronization with the TV.

1. Turn on Bluetooth on your TV: Go to Settings → Devices → Bluetooth and activate the feature.
2. Turn on the interface mode: press the Menu + OK buttons simultaneously for 5 seconds until the indicator starts flashing.
3. Wait for detection. The TV should show the name of the remote (e.g. Xiaomi RCxxx). Select it from the list.
4. Confirm the connection. Some models will need to enter PIN-code (usually 0000 or 1234).

If the remote is not detected:

• 🔋 Check the battery charge (if the remote has a battery). USB-port.
• 🔄 Reboot the TV’s Bluetooth module: Turn off Bluetooth in settings, turn off the TV from the outlet for 30 seconds, then turn on again.
• 📱 Make sure there are no other Bluetooth devices nearby that can cause interference (earphones, smartphones, fitness bracelets).

On the Mi TV Q2 and newer models, automatic connection is supported: just turn on the remote, and the TV will detect it itself within 10-15 seconds.

Customization of universal remote Mi Remote

Universal remote Xiaomi Mi Remote can control not only the TV, but also other equipment (for example, Xiaomi Mi Box or audio system).

1. Download the Mi Home app on your smartphone (available for Android and iOS).
2. Add the remote to the application: press + → Remote → Xiaomi Mi Remote.
3. Select the device type (TV, console, air conditioner) and follow the instructions on the screen.
4. Test the buttons. The app will suggest checking the main functions (on, volume, channels).

If the remote control is not controlling the TV:

• 🔍 Make sure the app has the right TV model (e.g. Mi). TV 4S 55").
• 📶 Check that the smartphone and remote are connected to the same Wi-Fi network (some features require cloud sync).
• 🔄 Update the remote firmware via Mi Home: Device → Settings → Update of the PO.

The universal Mi Remote supports up to 10 devices at a time, but for Xiaomi TVs, it is recommended to use the "TV Mode" mode, rather than a universal profile.

Solving problems with the Xiaomi remote

If the remote has stopped working or is behaving unstablely, use this table for diagnosis:

If none of the methods helped, try resetting the remote to the factory settings:

1. Turn off the TV.
2. Press the Menu + Back + OK button for 15 seconds.
3. Release the buttons and turn on the TV. The remote must automatically connect.

⚠️ Note: On some models (Mi) TV Stick, Mi Box 4K) Resetting the remote will remove all the associated devices, and then you'll have to reconnect it to the TV.

Alternative ways to manage Xiaomi TV without remote control

If the remote is broken or lost, you can control the TV in other ways:

• 📱 Mi Remote (available for Android and iOS) allows you to control your TV via Wi-Fi or Bluetooth. Download it to the App Store or Google Play.
• 🎮 Connect a gamepad via Bluetooth (e.g. Xiaomi Game Controller) and use it to navigate.
• 🖱️ Mouse and keyboard. USB-Mouse or wireless keyboard to the TV via port USB-A.
• 🗣️ Voice control: You can use commands like, OK Google, turn on Netflix on models with Google Assistant or Alice".

To manage through Mi Remote:

1. Connect your smartphone and TV to the same Wi-Fi network.
2. Open the app and select your TV from the list.
3. Follow the instructions on the screen for synchronization.

💡

If you don’t have a remote and your TV isn’t connected to Wi-Fi, use the Reset button on the back (usually next to the back). HDMI-Press it with a pin for 5 seconds to reset the network settings and reconnect.

Update of the firmware of the remote and TV

If the remote is unstable, the cause may lie in outdated software.

For the TV:

1. Go to Settings → System → Software Update.
2. Click Check for updates.
3. If a new version is available, confirm installation. The TV will restart automatically.

For the Bluetooth remote:

1. Connect the remote to the TV.
2. Go to Settings → Devices → Remote DU → Update.
3. Wait until the process is complete (don’t turn off the remote!).

For the universal Mi Remote:

1. Open the Mi Home app.
2. Select your remote in the list of devices.
3. Click Settings → Update the firmware.

⚠️ Warning: If the TV is powered down during the firmware update, the device may fail. Make sure the TV is connected to the network via an uninterruptible power supply (UPS).

💡

Regularly updating the firmware of the remote and TV solves 80% of problems with connection and delays of buttons.

FAQ: Frequent questions about Xiaomi TV remotes