How to set up a remote from Rostelecom on a Xiaomi TV: full instructions with codes

Why the remote does not work with Xiaomi and what to do

Remote control from Rostelecom often comes with interactive consoles, but not always compatible with Xiaomi TVs out of the box. Manufacturers use their own signal coding algorithms, and universal remotes (including those from providers) require manual adjustment. 80 percent of the time, the problem is solved by entering the correct code or flashing the remote, but there are nuances that depend on the Mi model. TV and firmware versions.

In this article, you will find the latest compatibility codes for all popular Xiaomi models (from Mi). TV 4A Xiaomi TV Q2 2023), step-by-step configuration instructions, and solutions to typical errors, from flashing indicator to completely ignoring commands, with special attention to alternative methods (for example, using the Mi Remote application) if standard synchronization does not work.

Before you start, make sure that: 1) Rostelecom remote supports the regime "TV" (usually marked TV/AV or SETUP). 2) Xiaomi TV has infrared on (IR) Receiver – some models (e.g. Mi) TV Q1E) They only use Bluetooth remotes.

What Xiaomi models are compatible with Rostelecom remotes

In theory, any Xiaomi TV with an infrared port can work with a remote from Rostelecom, but in practice there are limitations.

⚠️ Attention: Xiaomi TVs with a prefix OLED (Like Mi. TV Q2 OLED) They often use Bluetooth remotes and do not have IR-In this case, the Rostelecom remote will not work, you will need to buy a universal device. IR-transmitter (e.g. BroadLink) RM4).

If your model is not listed in the table, check for availability. IR-Port: it looks like a small window (usually black) on the bottom or side of the TV. If there is no port, no setup is possible.

Step-by-step: how to tie the remote Rostelecom to Xiaomi

The setup process takes no more than 5 minutes if you follow the algorithm, you only need the remote control and the TV, you don't need an Internet connection or any additional devices.

Algorithm of action:

1. Turn on the Xiaomi TV and point the Rostelecom remote at it from a distance of 1-2 meters.
2. Press the buttons at the same time. TV (or SETUP) and OK 3-5 seconds until the indicator flashes twice.
3. Enter the 4-digit code for your model (see table below) with digital buttons. After each click, the indicator should flash once.
4. Press. OK If the TV reacted (for example, the volume changed), the setting is successful.
5. If there is no response, repeat the steps with another code.

⚠️ Note: Some Rostelecom remotes (e.g. models) STB-1070 or RT-KP100) They need to pre-reset. SETUP 10 seconds until the indicator goes out and flashes again.

Topical codes for Xiaomi TVs (2026)

The universal remote codes are updated periodically, so old instructions (until 2022) may contain incorrect data.

• 📺 Mi TV 4A/4C (2018–2020): 0019, 0178, 0004
• 📺 Mi TV 4S (2019–2021): 0065, 0123, 0097
• 📺 Xiaomi TV Q1E/Q2 (2021–2023): 0123, 0097, 0171
• 📺 Redmi Smart TV (All models: 0001, 0019, 0180
• 📺 Xiaomi TV A2 (2023): 0195, 0178

If none of the code worked, try the universal 9999 combination, which activates the auto search mode. CH+ or CH-, until the TV reacts, then save the setting button OK.

🔍 How to know if the code fits?

The TV must respond to any command (e.g., change the volume or change the channel) If there is no response within 10 seconds, the code is wrong.

💡

If the Rostelecom remote is too tight for Xiaomi, try reducing the distance to the TV to 50 cm or point it at an angle of 30-45 degrees. Sometimes it helps to replace the batteries with new ones (even if the old ones “seem to work”).

What to do if the remote is not configured: 5 working ways

If the standard procedure didn't work, don't rush to buy a new remote. Here are the alternative methods that users have tested:

1. Resetting the remote to factory settings

On some models of Rostelecom (for example, RT-KP200) The settings are disrupted by a firmware conflict:

1. Remove the batteries for 1 minute.
2. Put them back in and pinch them. SETUP + 1 by 10 seconds.
3. The indicator should blink 3 times - this is a signal of a successful reset.

2.Use of the training mode (Learning Mode)

If your remote supports the learning function (as indicated in the instructions), you can “copy” signals from your native Xiaomi remote:

1. Activate the training regimen: SETUP + 9 (Indicator blinks quickly).
2. Direct your native Xiaomi remote to the Rostelecom remote (distance 2-3 cm).
3. Press the button on the native remote that you want to copy (for example, VOL+).
4. Confirm the saving on the remote of Rostelecom button OK.

⚠️ Note: Training mode does not work on all models of remotes of Rostelecom. Before you start, check if the instructions mention the Learning or Copy function.

3. Connection through HDMI-CEC

If the remote control of Rostelecom controls the console connected to Xiaomi HDMI, turn on HDMI-CEC:

1. Go to Settings → Devices and accessories → HDMI-CEC.
2. Activate the Control option HDMI.
3. Now the remote Rostelecom will switch channels on the console, and the TV will respond synchronously.

4 Mi Remote as an alternative

If you can’t set up the physical remote, use the official Mi Remote app (available for Android and iOS):

• 📱 Download the app from Google Play or App Store.
• 🔍 Select from the list of Television devices → Xiaomi.
• 📶 Connect your phone and TV to the same Wi-Fi network.
• 🎯 Follow the instructions on the screen for synchronization.

5. Purchase. IR-repeater

For Xiaomi TVs without IR-port (e.g. Xiaomi) TV Q2 OLED) The only solution is to purchase IR-repeater (e.g. Xiaomi Mi) IR Blaster or BroadLink RM4 Pro) The device is connected to USB-port of the TV and emulates the infrared signal.

💡

If the Xiaomi TV doesn’t respond to any code, check if it’s turned off first. IR-receiver in settings. For this, go to Settings → Devices and accessories → Remote control and make sure that the Infrared port option is active.

Common Mistakes and How to Avoid Them

Mistake. №1: The remote is flashing, but the TV is not responding

Reason: The code is incorrectly entered or the remote is too far away.

• 🔄 Repeat the code by pressing the buttons more slowly (interval of 1 second).
• 📏 Reduce the distance to the TV to 30-50 cm.
• 🔋 Replace batteries – even “near-settled” ones can cause failures.

Mistake. №2: Not all buttons work

Reason: Partial code compatibility. Solution:

• 🔢 Try another code from the list.
• 🎯 Configure the missing buttons in training mode (if supported).
• 📱 Use the Mi Remote app for missing features.

Mistake. №3: The TV is turned on but not turned off

Reason: Team conflict with the home console.

• 🔄 Turn off the TV with your own remote control, then try turning on the Rostelecom remote control.
• 🔧 In Xiaomi settings, disable Quick Start option (Settings) → Power supply).

Mistake. №4: The remote indicator does not blink when pressed

Reason: Hardware malfunction of the remote or dead batteries.

• 🔋 Replace your batteries with new ones (even if the old ones seem to work").
• 🛠️ Disassemble the remote and check the button contacts (possibly oxidized).
• 📞 Contact Rostelecom for a replacement console (if it is in warranty).

How to check if it works IR-Xiaomi receiver

If the Rostelecom remote doesn't adjust, first of all, make sure that the infrared receiver of the TV is working. Here are 3 ways to check:

Method 1: Visual inspection

IR-The receiver looks like a small window (usually black or dark red) on the front of the TV:

• 🚫 Glued (for example, factory film) - carefully remove the coating.
• 💥 Cracked or contaminated - wipe with an alcohol napkin.
• 🔍 Not there, your model doesn’t support it. IR-management.

Method 2: Checking the camera smartphone

Turn on the camera on your smartphone and point the remote control of Rostelecom (from a distance of 5-10 cm). When you press any button on the screen should appear purple light (IR-If there is no signal:

• 🔋 Batteries in the remote are sat down.
• 🛠️ Remote is faulty.

Method 3: Testing with a native remote

If you still have a native Xiaomi remote, check it out. If it doesn't run a TV, too:

• 🔧 In Xiaomi settings go to Settings → Devices and accessories → Remote and make sure that the Infrared port option is enabled.
• 🔄 Restart the TV (unplug the network for 1 minute).

⚠️ Attention: On Xiaomi TVs with Android TV 11+ (for example, Xiaomi TV Q2 2023) IR-The receiver can be turned off by default to save power. To activate it, go to Settings. → System system → Developer mode → Debugging by IR and turn on the option.

FAQ: Frequent questions about setting up