How to set up a remote on a Xiaomi TV: a complete guide with photos and tips

Smart TVs Xiaomi - it's not only a high-quality picture and powerful stuffing, but also convenient control. TV Remote users face problems: the synchronization is lost after the update, the buttons are not working correctly, the universal remote refuses to recognize commands. In this article, we will analyze all ways to configure the remote for Xiaomi Mi TVs. TV (including the Mi models TV 4A/4S/4X/5/5 Pro, Mi TV Q1/Q2, Redmi Smart TV), We will also tell you how to solve typical problems without contacting the service center.

If you just bought a TV or lost your own remote, don't rush to buy a new one. Maybe your Android smartphone or your old universal remote. LG/Samsung If the original Mi Remote suddenly stopped working, check the batteries and the communication channel before blaming the manufacturer. Next, you will find step-by-step photo instructions, compatibility tables and answers to frequent questions.

⚠️ Important: The instructions in this article are relevant for firmware MIUI TV 2.0.0 and later (2021–2026) If your TV is released before 2020, some menu items may differ – see section FAQ.

How to sync the original Mi remote TV Remote

The original Xiaomi Mi remote TV Remote (white or black) connects to the TV via Bluetooth Low Energy protocol (BLE), It's not infrared, like most competitors, which means that you need to do it in advance, and without it, the buttons won't respond.

If the remote is new, it's usually paired with the factory TV, but after resetting, updating the firmware, or replacing the batteries, it may need to be reconnected.

Step 1: Checking the batteries and turning on the remote

Before setting up, make sure that the remote has working batteries (such as: AAA). If the indicator on the remote does not flash when you press the buttons, try it:

• 🔋 Replace batteries with new ones (even if the old ones seem to work").
• 🔄 Reboot the TV: Press the power button on the TV body for 10 seconds.
• 📱 Make sure there are no sources of interference nearby (microwaves, routers at 2.4 GHz frequency).

Step 2: Automatic synchronization

The easiest way to do this is to use automatic synchronization:

1. Turn on the TV with a button on the body.
2. Press and hold the buttons. ⊞ Menu + ← (Rear) on the remote simultaneously for 5 seconds until the indicator flashes blue.
3. Bring the remote to a distance of 10-20 cm to the TV (to the upper right corner of the screen, where the Bluetooth module is located).
4. Wait for the message on the screen: "DU remote is connected".

⚠️ Note: If the TV doesn’t respond to button retention, try an alternative method – through the settings menu (see next section).

Step 3: Manual synchronization through the TV menu

If the automatic method does not work, connect the remote manually:

1. Open the TV menu with a button on the case or through the Mi Remote App (if it is already set up).
2. Go to Settings. → Devices and accessories → DU remote.
3. Select "Add remote" and follow the instructions on the screen.
4. When a request appears, press any button on the remote (for example, OK).

Once you have successfully connected, check all buttons. If some features (such as volume control) don’t work, you may need to update the remote firmware – read about this in the “Problem Solving” section.

Setting up a universal remote (LG, Samsung, Philips and others.)

If you don't have the original Xiaomi remote, you can replace it with a universal one from another manufacturer. However, there are nuances here: Xiaomi TVs use custom command codes, so not all universal remotes support full functionality.

Compatibility of universal remotes with Xiaomi TV

The table below shows the models of remotes that are guaranteed to work with Xiaomi Mi TV (data relevant for 2026):

⚠️ Note: If your remote does not support Xiaomi out of the box, try manually combing through codes for the brand "XiaoMi" or "MiTV" (sometimes written together".

Instructions for programming a universal remote

General configuration algorithm:

1. Turn on the TV with a button on the body.
2. Press and hold the Setup (or Set) button on the remote until the indicator flashes.
3. Enter the code for Xiaomi (see table above) or activate the automatic search mode.
4. Press Power – If the TV is turned off, the code is correctly selected.
5. Save the settings (usually with a long press of Setup).

If the remote does not find the code, try an alternative method:

• 🔍 Use Learning mode if it is supported. This will require the original Mi Remote remote.
• 📱 Install the Mi Remote app on your smartphone and use it as a “middleman” to set up.

Make sure the batteries are charged|Find the instructions to the remote (usually there is a list of codes)|Connect the TV to the network (not through a socket with a switch)|Write factory codes for other devices (in case of resetting)-->

Xiaomi's management TV from the smartphone (Mi Remote App)

If you don’t have a remote, you can use an Android or iOS smartphone as a replacement. Mi Remote app supports not only TVs but other Xiaomi devices (air conditioners, projectors, etc.).

Installation and configuration of Mi Remote

Download the official appendix:

• 🤖 Mi Remote for Android
• 🍎 Mi Remote for iOS

After installation:

1. Open the app and allow access to Bluetooth and Locations (required for device search).
2. Press "Add device" → "Television" → "Xiaomi".
3. Select your TV model from the list (e.g. Mi). TV 4A 43").
4. Follow the instructions on the screen – the app will automatically connect to the TV.

Important: To work Mi Remote TV and smartphone must be connected to the same Wi-Fi network (if using control over the local network) or Bluetooth (for direct commands).

Features of the Mi Remote application

Unlike the physical remote, the application offers advanced features:

• 🎮 Virtual keyboard for text input (convenient for searching in YouTube or browser).
• 🔊 Volume adjustment with gestures (swipe your finger up/down the screen).
• 📁 Quick access to installed applications (Netflix, Prime Video, etc.).
• 🔄 Switching between multiple Xiaomi TVs in the home.

⚠️ Warning: If the app doesn't find the TV, check it out:

• Bluetooth and Wi-Fi are enabled on both devices.
• Does the antivirus block or VPN Connection (especially relevant to iOS).
• Is the TV firmware updated (in older versions) MIUI TV There may be no support for Mi Remote).

💡

If you have an iPhone and Mi Remote doesn’t connect over Bluetooth, try using the “Access Point” mode on your TV: go to Settings → Network → Wi-Fi access point and connect to it from your smartphone.

Solving problems with the Xiaomi remote TV

Even after you set it up properly, the remotes can be incorrect, so let's look at the typical faults and how to fix them.

Remote is not responding to pressing

If the indicator on the remote does not flash:

• 🔋 Check the batteries (even new ones can be discharged).
• 🔄 Reboot the TV with a button on the body.
• 📡 Make sure there are no obstacles between the remote and the TV (glass, metal).
• 🔧 Reset the remote settings: press down ⊞ Menu + ← 10 seconds.

If the light flashes but the TV does not respond:

• 🔄 Reconnect the remote via the Settings menu → Devices and accessories.
• 📱 Update the TV firmware: Settings → On TV. → Updating the system.
• 🛠️ Reset the TV to factory settings (extreme case).

The buttons are not working correctly (stick, double press)

This is a common problem after a firmware update.

• 🔧 Reprogram the remote: remove it from the Devices and Accessories menu and connect it again.
• 📋 Check if the remote is in conflict with other Bluetooth devices (earphones, keyboards).
• 🛒 If the remote is physically damaged (liquid, cracks), replace it. Original remotes can be ordered on the official website of Xiaomi.

Setup remote from another Xiaomi device

If you have a remote from Xiaomi Mi Box, Mi Projector or other ecosystem device, you can try connecting it to your TV, but note that not all buttons will work – for example, there may be no management of Smart functions.

Compatible Xiaomi remotes

The table shows the remotes that can be used with Xiaomi TV:

Instructions for connection

To connect the remote from another device:

1. Make sure the remote is not fully discharged (the indicator flashes when pressed).
2. On the TV, go to Settings. → Devices and accessories → DU remote → Add the remote.
3. Press and hold. ⊞ Menu + OK remotely within 5 seconds.
4. Wait for the message "Connected".

If the remote does not connect, try resetting it: remove the batteries for 1 minute, then repeat the procedure.

💡

Remotes from the Mi Box and Mi Projector often work with Xiaomi TVs, but may not support all features (like voice search or launching Netflix with a single button).

Update of the firmware remote Xiaomi

In rare cases, the remote is not working properly because of outdated firmware, which can be updated through the TV.

How to check the remote firmware version

To find out the current version:

1. Open on the TV settings → On TV. → POS version.
2. Scroll down to the "DU Remote" section.
3. If the version is below 1.4.0, it is recommended to update.

Instructions for updating

The update is automatically activated when you connect the remote to the current firmware TV.

1. Connect the TV to the Internet.
2. Go to Settings → About TV → System Update.
3. If you have an update available for the remote, you'll get a notification.
4. Do not turn off the remote or remove the batteries during the process (takes up) ~2 minutes).

⚠️ Note: If the TV turns off during the remote upgrade (for example, due to a power outage), a factory reset may be required:

1. Remove the batteries from the remote for 30 seconds.
2. On the TV, press the Power button on the body for 15 seconds.
3. Reconnect the remote (see the "Synchronization" section).

FAQ: Frequent questions about setting up the Xiaomi remote TV