Connecting Xiaomi TV Box to TV: full instruction with photos and tips

Xiaomi Mi Box (including Mi Box S, Mi Box 4, Mi) TV Stick has become a popular solution for converting a regular TV to a “smart” with Android support TV, 4K HDR But even with a simple device, people are faced with questions like, what cable to use, why don't you have sound through it? HDMI, How to set up a remote control for a TV or why the console can't see Wi-Fi. This article covers all the steps from unpacking the box to fine-tuning the image and sound, including solving typical problems.

We will not only analyze the basic connection, but also the hidden features of Xiaomi. TV Boxes that the manufacturer does not advertise: for example, how to turn on the developer mode to install third-party APK Or set up automatic input switches on the TV when you turn on the console. Instructions are relevant for all Xiaomi models (including Mi Box 3 and Mi). TV Stick 4K) It is compatible with Samsung TVs, LG, Sony and other brands.

If you have just purchased a console or are planning to buy, save this article in bookmarks - it will come in handy for initial setup and for solving problems in the future.

1. What is included and what cable is needed for connection

In the box with the prefix Xiaomi Mi Box you will find:

• 📦 The prefix itself (model is indicated on the bottom of the device).
• 🔌 Power supply with cable (important: use only the original adapter!).
• 🎮 Remote control panel with batteries (in models Mi) TV Stick remote can be without voice control).
• 📄 Short instructions (usually in several languages, but without details).
• 🔗 Cable HDMI (Only some models are included, such as the Mi Box S).

We're going to talk about cables separately. HDMI, But not all cables are the same:

• 🔹 HDMI 2.0 — minimum requirement 4K@60Hz and HDR. Included in the Mi Box S.
• 🔹 HDMI 2.1 — necessary 4K@120Hz (relevant to gamers) or 8K, But Xiaomi does not support such permissions.
• 🔹 HDMI Ethernet – not required, as the console connects to the network over Wi-Fi or separate LAN-adapter.

If not included HDMI-cable (like the Mi cable) TV Stick, use any certified High Speed cable HDMI Long cables up to 3 meters long (5)+ meters) may cause image artifacts or signal loss.

⚠️ Note: Do not use cheap uncertified HDMI-cables – they may not transmit sound in Dolby Digital format+ support HDR10, Even if the TV and the TV allow it.

2. Connecting Xiaomi TV Box to TV: step-by-step instructions

Make sure the TV is turned off before you start.

1. Connect. HDMI-cable to the console and TV. Use the port HDMI 2.0 (usually marked on the back of the TV).
2. Connect the power supply to the console and plug it into the socket. USB-TV port for power – this can cause unstable work.
3. Turn on the TV and select the signal source corresponding to the connected HDMI-port, HDMI 1 HDMI ARC).
4. Wait for the console to load. The Mi logo will appear on the screen and a suggestion to choose a language.

If the image does not appear:

• 🔄 Switch to another. HDMI-television-port.
• 🔌 Check the density of the cable connection (sometimes connectors) HDMI «They are moving away because of the weight of the cable).
• 📺 On some TVs (such as Samsung) QLED) You need to manually activate the mode. HDMI-CEC TV-setting.

If the Xiaomi console does not turn on at all (there is no indication on the case), check:

• 🔌 Power of the socket (connect another device).
• 🔋 Integrity of the power cable (try another adapter with similar characteristics: 5V/2A most models).
• 🔄 Reset button on the bottom of the console (clip it with a paper clip on the 10 second-hard reset).

3. Setting up language, Wi-Fi network and Google account

After the first switch on, the console will prompt you to choose a language, we recommend you to install Russian (available in all models, except for some regional versions for China).

Wi-Fi connection:

1. Select your network from the list.
2. Enter the password (use the remote or connect the keyboard via Bluetooth).
3. If the console does not see Wi-Fi: 📶 Make sure the router is 2.4GHz (not all Xiaomi models support 5GHz). 🔄 Reboot the router. 📵 Check if the router is enabled mode "hidden network» (SSID hiding).

Log in to Google account:

The console will require authorization through a Google account, which is required for access to Google Play and data synchronization.

• 📱 Create it on your phone at accounts.google.com.
• 🔑 Use a strong password – Xiaomi consoles are often targeted for hacking through vulnerabilities in Android TV.
• 🔄 If the console asks to update Google Play Services, agree – it will fix the errors with authorization.

⚠️ Note: On consoles with firmware for China (models with suffix) CN) Google Play may not be available, and you will need to have manual firmware for the global version or installation. APK through ADB.

💡

If the Xiaomi remote doesn't respond to taps, remove the batteries for 30 seconds, then insert back in.This will reset the pairing and often solves the problem.

4. Image optimization: 4K, HDR and frame rate

By default, Xiaomi can display an image in resolution 1080p, Even if the TV is still on 4K. To set the maximum quality:

Adjustment steps:

1. Go to Settings → Display and Sound → Screen Resolution.
2. Choose. 3840×2160 (4K) frequency 60 Hz (if the TV supports the TV).
3. Turn it on. HDR (if TV compatible) and Dolby Vision (available on Mi Box S 2nd revision and later).
4. In the section Additionally activate the Author HDMI — This will allow the console to automatically adjust to the settings of the TV.

Permit compatibility table:

If the screen has turned black after the resolution change or artifacts have appeared:

• 🔄 Wait 15 seconds – the console will automatically return to the previous settings.
• 📺 Check if yours is supported. HDMI-cable 4K@60Hz (needs standard) HDMI 2.0).
• 🔧 On TVs. LG OLED You may need to disable Deep Color in your settings. HDMI-port.

5. Sound tuning: HDMI ARC, Dolby and Audio Problems

Xiaomi supports sound output through HDMI, But sometimes users are faced with a lack of sound or a low quality:

If there's no sound at all:

• 🔊 Check that the right sound source is selected in the TV settings (e.g, HDMI ARC sound-system).
• 🔧 Go to Settings. → Display and sound → Digital sound (HDMI) and choose Auto or PCM.
• 🔄 Reboot the console (press the power button on the remote for 5 seconds).

To improve sound quality:

• 🎵 Enable Dolby Audio in the audio settings (available on the Mi Box S).
• 🔊 If you use a sound panel or receiver, activate it. HDMI ARC on the TV and in the settings of the consoles.
• 📶 For wireless headphones, connect them via Bluetooth in the Settings menu → Devices → Bluetooth.

If the sound is delayed (rassynchron):

• 🎮 In games or videos, turn on the console settings Game Sound Mode (reduces latency).
• 📺 On Samsung TVs, turn off sound processing in the Sound menu → equalizer → Off..

⚠️ Attention: On the Mi consoles TV Stick sound through HDMI ARC It may not work smoothly due to hardware limitations, in which case use a separate audio output (e.g. 3.5mm on a TV).

6.Configuring the remote control and voice control

The remote from Xiaomi Mi Box can control not only the console, but also the TV (on / off, volume control).

Interconnection of the remote to the TV:

1. Press and hold the button. TV (or Power) on the remote 3 seconds until the indicator flashes.
2. Follow the on-screen instructions for choosing a TV brand (Samsung, LG etc.).
3. Check the volume and power buttons.

If the remote doesn't match:

• 🔋 Replace batteries (even if they are new - sometimes contact is bad).
• 📶 Make sure there are no obstacles between the console and the console (walls, furniture).
• 🔄 Reset the remote settings: pinch Back + Home for 5 seconds.

Voice control:

The Mi Box S and newer models support voice search through the Microphone button on the remote.

1. Make sure that the settings of the consoles are enabled Google Assistant (Settings) → The device → Voice search).
2. Press and hold the microphone button, then say the command (e.g., “Turn on Netflix”).

If voice search doesn’t work:

• 🔊 Check that the microphone is not silenced (no physical lock on the remote control).
• 📶 Make sure the console is connected to the Internet (voice commands are processed by Google cloud).
• 🔄 Update the console firmware (see next section).

💡

Xiaomi remote can be used to control a TV, sound bar, and even air conditioning (if supported by the protocol). IR).

7. Update firmware and install applications

Regular firmware updates fix bugs, add new features and improve compatibility.To update Xiaomi's console:

Automatic update:

1. Go to Settings → About the console → System update.
2. Click Check for updates.
3. If an update is found, confirm the installation and wait for the reboot.

Manual update (if automatic does not work):

1. Download the latest firmware for your model from the official website mi.com (support section).
2. Copy the.zip file to a flash drive (formatted in FAT32).
3. Connect the flash drive to the console and follow the instructions in the System Update menu → Local Update.

To install apps (e.g. YouTube, Netflix, Kodi):

• 📱 Open the Google Play Store on the console and find the desired application.
• 🔍 If the app is not available in the Store (for example, IVI), download APK from a trusted source (e.g. apkmirror.com) and install through the File Manager.
• 🔧 For installation APK You may need to allow Unknown sources in your security settings.

⚠️ Note: Installing pirated versions of apps (e.g., modified Netflix) may result in an account or console being blocked. IP-Use only official sources.

8. Solving Typical Problems With Xiaomi TV Box

Even after you've set up correctly, you can have problems, and here are the most common solutions.

The prefix shall not be activated:

• 🔌 Check the power supply (try another adapter with the same specifications).
• 🔄 Reset: Press the Reset button on the console body for 10 seconds.
• 📦 If the console is heated and turned off, check the ventilation holes (should not be closed).

No image, but there's a sound:

• 🔧 Change the screen resolution to 720p or 1080p in blind mode: click on the remote Settings → Right. ×3 → Down. ×2 → OK.
• 🔄 Reconnect. HDMI-cable (sometimes contacts are oxidized).

The console brakes or overheats:

• 🧹 Clear the cache: Settings → Annexes → Select the application → Clear the cache.
• 🔄 Turn off auto-run of unnecessary applications in the developer settings.
• 📦 If the console is very warm, use a cooling stand (relevant to the Mi Box 3).

The remote is down.

• 🔋 Replace batteries (even if they are new – sometimes they are discharged from the factory).
• 📶 Check the IR port on the console (should not be closed with a decorative panel).
• 🔄 Reset the remote: Remove the batteries, press any button 10 times, then insert the batteries back.

If the problem is not resolved, contact Xiaomi with a statement of the console model and a description of the malfunction. In some cases (for example, hardware breakdowns), repairs may be necessary.

💡

Most of the problems with Xiaomi TV Box is solved by resetting to factory settings (Settings) → Reset.Pre-reset, save your Google account details before resetting!

FAQ: Frequent questions about Xiaomi TV Box