Setup OLED Saver on Xiaomi: a complete guide to screen protection

OLED screens in Xiaomi devices are not only bright colors and deep black, but also the risk of pixel burnout over long-term use. Static interface elements (navigation panels, channel logos on TVs, notification icons) can leave traces that become noticeable over time even when watching content. To avoid this, Xiaomi has implemented OLED Saver technology, a set of measures to extend the life of organic LEDs.

In this article you will find detailed instructions for setting up OLED Saver on Mi TVs TV, Redmi Smart TV and Xiaomi smartphones with AMOLED-We'll look at what's going on in protecting the screen, how to calibrate the brightness, and why some modes are better off not activating unnecessarily. OLED Saver at the firmware level, and which require manual configuration through the engineering menu.

What is an OLED Saver and why is it needed?

OLED Saver is a hardware and software package that reduces the risk of pixel burnout on organic screens. Unlike LCD, where the backlight is uniform, in OLED, each pixel glows independently, and over time, the brightness of individual pixels decreases, leading to the appearance of shadows from static elements.

OLED Saver technology in Xiaomi devices works in several directions:

• 🔄 Pixel offset: slight movement of static elements (e.g. taskbar) for uniform wear.
• 🌓 Automatic Brightness Adjustment: Reduce backlighting in dark scenes to reduce load.
• ⏱️ Disconnection timer: forced "rest" of the screen with prolonged inactivity.
• 🎨 Color calibration: Adjusting white balance to reduce the load on blue and green subpixels (they burn out faster).

On Xiaomi TVs (Mi TV OLED, Redmi Smart TV X series), the OLED Saver feature is integrated into the firmware and activated by default. On smartphones (for example, Xiaomi 13 Ultra, Redmi K60 Pro), it must be enabled manually through screen settings or engineering menus.

⚠️ Note: On budget models Xiaomi with AMOLED-screens (e.g. Redmi Note 12 Pro) OLED Saver may be missing. In this case, screen protection only provides maximum brightness limitation and sleep timer.

What Xiaomi devices support OLED Saver

The OLED Saver feature is not available on all Xiaomi devices, but it depends on the screen type and firmware version, and below is the compatibility table for popular models:

If your model is not listed in the table, check for the feature through the settings menu. On Xiaomi TVs, the path: Settings → Picture → Additional settings → OLED Saver. On smartphones, search for the Screen → Additional or search by settings.

How to turn on OLED Saver on Xiaomi TVs

On Mi TV OLED and Redmi Smart TVs, OLED Saver is usually activated by default, but you can customize it to suit your needs.

1. Open the settings (cog on the remote or in the upper right corner of the screen).
2. Go to the Picture section → Additional settings.
3. Select OLED Saver (on some models – Screen Protection).
4. Activate the slider Enable OLED Saver.
5. Set up additional parameters: 🔹 Screen brightness: It is recommended to set no higher than 70% for everyday use. 🔹 Pixel timer: Turn on static elements offset (optimally every 2 minutes). 🔹 Burnout compensation: Activate if the screen is used for more than 6 hours a day.

After settings are applied, the TV can restart. That's normal, the system calibrates the screen settings.

Brightness set to 60-70%|The pixel displacement timer is activated|Burnout compensation included (in heavy use)|Mode "Cinema" is turned off (increases the load on the screen)-->

⚠️ Note: On Xiaomi TVs with firmware older than 2022 feature OLED Saver may not be available. Update the software via Settings → On TV. → Updating the system.

Setting up OLED Saver on Xiaomi smartphones

On smartphones Xiaomi with AMOLED-screens (e.g. Xiaomi 13 Ultra or Redmi) K60 Pro) function OLED Saver is hidden in the depths of the menu, and activation depends on the model:

Method 1: Through standard settings (for new models)

1. Open the Settings → Screen.
2. Slip on the additional screen settings.
3. Find Screen Protection (OLED) or Life Extension.
4. Activate the slider and select the mode: 🔘 Balanced – Optimal for most users. 🔘 Maximum protection – reduces brightness and limits screen time.

Method 2: Engineering menu (for older models)

If the standard settings do not have OLED Saver, try activating it through the engineering menu:

1. Open the Phone app and enter the combination: ##36446337###.
2. In the engineering menu, go to the Display or Screen section.
3. Find the OLED Aging Test or Burn-in Protection settings.
4. Set the Enable value to activate the protection.

Warning: Changes to the engineering menu can lead to unstable screen performance. On Xiaomi models 12 and older, after activation of the OLED Saver through the engineering menu, the color calibration may be lost - you need to reset the screen settings.

💡

If after setting up OLED Saver, the colors on the screen become dull, reset the color profile to Settings → Screen → Color Mode → Reset.

Optimal brightness and timer settings

Properly calibrating brightness and timers is the key to longevity OLED-Recommended settings:

• 🌞 Maximum brightness: not higher 70% In everyday use, for viewing. HDR-Content can be temporarily upgraded to 80-90%.
• ⏲️ Sleep timer: 30 seconds for smartphones, 2 minutes for TVs. This prevents static loading.
• 🔄 Replacement of pixels: turn on TVs (interval — 1-2 On smartphones, this function works automatically.
• 🌙 Adaptive brightness: turn off if you use the device in stable lighting conditions. Adaptation algorithm can overstate brightness.

For Xiaomi TVs, it is also useful to adjust picture modes:

• 📺 Mode "Cinema": turn off - it increases the load on the screen.
• 🎮 Game mode: use only when necessary (increases brightness and contrast).
• 📊 Standard Mode: Optimal for Daily Viewing.

💡

Using the Mode of the "Cinema" on OLED-TVs Xiaomi accelerates the burnout of pixels by 20-30% compared to the "Standard" mode.

What to do if the OLED Saver is not working

If the OLED Saver function is not activated after setting up, check the following points:

1. Update the firmware: Xiaomi TVs may not have featured before MIUI TV 3.0. Update the software via Settings → About TV → System Update.
2. Reset your screen settings: go to Settings → Screen → Reset screen settings (on smartphones) or Settings → Picture → Reset (on TVs).
3. Check conflicts with other features: turn off Adaptive Brightness, Night Mode, and Read 2.0 – they can block OLED Saver from working.
4. Use alternative methods: If the feature is not available, install third-party pixel offset applications (e.g. Screen Shift for Android).

Redmi Smart TV X with firmware older than 2021 may require manual USB updates. Download the latest version of the software from Xiaomi’s official website and manually swipe the TV through Settings → About TV → Update via USB.

⚠️ Note: If after updating the firmware screen TV began to flicker or artifacts appeared, reset to factory settings through Settings → On TV. → Resetting. This will eliminate driver conflicts.

Additional protection measures OLED-screen

In addition to OLED Saver, the following measures will help to extend the screen life:

• 🔋 Use dark themes: in Settings → Screen. → Dark theme (on smartphones) or Settings → Registration → Dark mode (on TVs) This reduces the load on the pixels.
• ⏳ Limit the time of static images: don't pause the video or settings menu for long. Use screensavers.
• 📱 Disable Always-On Display: On Xiaomi smartphones, this feature accelerates pixel burnout in the watch and notification area.
• 🎵 Reduce brightness in music apps: Visualizers with bright colors (such as Spotify or YouTube Music) increase the load.

For Xiaomi TVs, it is also useful:

• 📺 Set up the screensaver: in Settings → Screen. → Select a dynamic option (for example, "Aquarium" or "Weather").
• 🔌 Disconnect the TV from the network at night: this resets the charge of pixels and prevents the accumulation of static images.

💡

On smartphones Xiaomi with AMOLED-Turn off the charging animation with the display off. To do this, go to Settings. → Battery → Charging animation and deactivate the option.

FAQ: Frequent questions about OLED Saver on Xiaomi