How to set up a new Xiaomi RedmiBook laptop 10S: Complete guide from unpacking to optimization

Xiaomi RedmiBook 10S — It's a powerful and stylish laptop that's great for both work and entertainment, but after buying it, many users are faced with the question: What do we do next? Simply installing Windows out of the box doesn't unlock the full potential of the device. In this article, we will explain in detail how to set up RedmiBook correctly. 10S from scratch – from the first inclusion to the fine optimization of the system.

You will learn which settings to change immediately, how to update drivers for maximum performance, which programs to remove and which to install first. Focus on security, power management and specific Xiaomi features that often go unnoticed. Following this guide, you can avoid common mistakes and customize your laptop to your needs in a minimum of time.

Preparing for the first turn on: what to do before launch

Before you press the power button, you need to follow a few important steps, which will help avoid problems in the future and save you time.

First, check the kit. In the RedmiBook box. 10S Must be: laptop itself, power supply (usually) 65W or 100W Depending on the modification, the power cable (Type-C or classic connector), documentation. If something is missing, contact the seller immediately, and inspect the case for mechanical damage, whether scratches, dents or backlashes in the hinges of the screen.

• 🔌 Connect the charger – even if the battery is charged, the first turn on is better to conduct from the network.
• 🌐 Prepare your Internet connection – it is advisable to use a wired connection (Ethernet) for the first run, as you will need to download updates. If this is not possible, check the password from your Wi-Fi network in advance.
• 📁 Backup your important data – if you plan to transfer files from your old device, prepare an external drive or cloud storage.
• ⏳ Allocate time – full setup will take from 1 to 3 hours depending on the Internet speed and selected parameters.

Note the Fn key on the RedmiBook keyboard 10S. In some models, it is blocked by default, and to use the functional keys (brightness, volume) you will need to press Fn. + Esc. This can be changed later in the BIOS, But at the first stage it is worth remembering this feature.

⚠️ WARNING: If you bought a laptop from an unofficial store or from hand, be sure to check the serial number on the Xiaomi website at the address. mi.com/global/verify. This will help to avoid buying a device with “gray” firmware or unoriginal components.

First Enabling and Initial Configuration of Windows

Once you press the power button, you start the initial setup process for Windows. 10S It is usually pre-installed with Windows 11 Home (sometimes Windows 10 with a free upgrade:

1. Language and region choice: Specify Russian (Russia) or any other language you want. Pay attention to the keyboard layout, the default language may be English (USA), which is inconvenient for Russian-speaking users.
2. Connect to the network. Choose your Wi-Fi network or use Ethernet. If you don't connect, check if the Wi-Fi adapter is on -- some RedmiBook models have a separate button or a combination of Fn for that. + F2.
3. Personal account. The system will offer you to sign in through a Microsoft account. If you don't have one, create it (it's free), but using a local account will be possible, but you will lose a number of functions, such as synchronizing settings and accessing the Microsoft Store.
4. Privacy options: You can turn off sending diagnostic data here (although Xiaomi recommends leaving basic settings to get driver updates).

Once the initial setup is complete, the system will suggest you choose to use: For personal use or for work. The choice affects the pre-installed programs and security settings. The first option will suit most users.

Important point: at the stage of setting up Windows RedmiBook 10S Xiaomi may offer to install additional software such as Mi Bluetooth or Mi Share. If you do not plan to use these services, feel free to refuse - they can always be installed later from the Microsoft Store.

System and Driver Update: Why It’s Critical

One of the first tasks after installing Windows should be to update the system and drivers, which is because even new Xiaomi laptops often come with outdated versions of the software, which can lead to:

• 🐢 Slow system operation;
• 🔊 Problems with sound or microphone;
• 🖥️ Artifacts on screen;
• 🔋 Incorrect operation of the battery.

To update, follow the following steps:

1. Open the settings. → Windows Update and click Check for Updates. Install all available packages, including optional ones.
2. Go to the official Xiaomi support website for RedmiBook (mi.com/global/support) And download the latest driver version for your model (x64 most models).
3. Install the drivers in the following order: 🖥️ Chipset (Intel/AMD); 🎮 Video card (Intel Iris Xe or NVIDIA MX450, depending on the modification); 🔊 Audio (Realtek or other); 📶 Network adapters (Wi-Fi and Ethernet); 🖱️ Touch panel (if any).

Critical feature of RedmiBook 10S: The power management driver (Xiaomi Power Management) is often not installed automatically through Windows Update. its absence leads to the fact that the laptop does not go into sleep mode and quickly discharges!

⚠️ Warning: Never use third-party driver packages (such as DriverPack Solution) for RedmiBook.They often contain outdated or incompatible versions, which can cause a malfunction of the touchpad or cooling system.

Optimizing Windows for Maximum Performance

Even after updating drivers, Windows is not set up in the best way for RedmiBook by default. 10S. Here are the key settings that need to be changed:

Power settings

By default, Windows uses a Balanced scheme, which is not always suitable for Xiaomi laptops.

• 🔋 Go to the Control Panel. → Power supply;
• 📊 Select High Performance Scheme (if the laptop is used from the network) or create your own plan with the following options: Disable the display: 10 Minutes; Sleeping: Never (if you are on the network); Screen brightness: 50-70% Balance between comfort and economy; USB-Ports: Never turn off (important for mouse/keyboard).

2. Disconnecting unnecessary services and autoboots

Many pre-installed programs (especially those from Microsoft and Xiaomi) run automatically and consume resources to disable them:

1. Press Ctrl.+Shift+Esc → Go to the Autoboot tab;
2. Sort by column Impact on the launch;
3. Disable everything except antivirus, drivers and mission-critical programs.

List of programs that can be safely disabled on RedmiBook 10S:

• 🎵 Mi Music and Mi Video (Xiaomi Media Players);
• 📱 Your Phone (unless you are syncing with your smartphone);
• 🎮 Xbox Game Bar (if you don't play);
• 📊 Mi Service (Xiaomi background service, not critical).

💡

To speed up the work SSD RedmiBook 10S, Turn off indexing files for disk C:. To do this, open the "Properties" of the disk. → uncheck the box "Allow indexing of the contents of files..." → apply C:\ and all subfolders.

3. Configuring virtual memory

By default, Windows manages the paging file itself, but for RedmiBook 10S 8-16 GB of RAM is better to set a fixed size:

1. Go to the settings. → System system → About the system → Additional system parameters → Speed of action → Parameters → Additionally;
2. In the Virtual Memory section, click Change.
3. Uncheck the tick Automatically select the size of the paging file;
4. Specify the initial size and maximum size equal to 1.5 × RAM volume (for example, for 16 GB of RAM – 24576 MB).

Set up specific Xiaomi functions

RedmiBook 10S It has some unique features that you won't find in other brands' laptops, and if you set them up properly, you'll be able to unlock the full potential of the device.

1. Xiaomi Fast Charge

RedmiBook's fast-charging technology allows you to charge up to 50 percent of your battery in 30 to 40 minutes, but by default, it can be turned off.

1. Install official Xiaomi Fast Charge software from the support site;
2. Connect the original power supply (power at least) 65W);
3. In the system tray, a charging icon will appear - click on it and select Fast Charge mode.

Important: Using non-original chargers can result in the quick charging feature being turned off or even battery damage.

2. Mi Smart Share

This feature allows you to quickly share files between RedmiBook and Xiaomi smartphones (or other Mi Share-enabled devices) to configure:

• 📱 Make sure that the smartphone is enabled Mi Share (in the settings Connection and Sharing);
• 💻 On your laptop, install the Mi Smart Share app from the Microsoft Store;
• 🔗 Turn on Wi-Fi and Bluetooth on both devices;
• 📎 To transfer files, simply drag them to the Mi Smart Share window or select the recipient device.

3. Performance modes in Mi Control Center

Xiaomi has added its own control panel to RedmiBook, similar to the Control Center on smartphones. To open it, swipe the touchpad from right to left (or press Fn). + C. You can go fast here:

• 🎵 Adjust volume and brightness;
• 📶 Turn on/off Wi-Fi and Bluetooth;
• ⚡ Switch performance modes: Balance - standard mode; Performance - maximum power (increases heating); Quiet - minimum fan noise (suitable for office use).

Data security and protection

A new laptop is always a risk of data leakage or virus infection. - RedmiBook 10S It is worth taking several steps to protect:

1. Installation of antivirus

The built-in Windows Defender provides basic protection, but for complete security, we recommend:

• 🛡️ Install Kaspersky Internet Security or Bitdefender Total Security (there are free trial versions available);
• 🔍 Complete system scanning after installation;
• 🔄 Automatically update antivirus databases.

2. Encryption of the disk

If sensitive data is stored on your laptop, turn on BitLocker:

1. Open the control panel. → Encrypting the BitLocker disk;
2. Select the C drive and click Enable BitLocker;
3. Save the recovery key in a safe place (for example, in your Microsoft account).
4. Select Encryption mode Only Occupied Space (faster) or All Disk (more reliable).

On the RedmiBook. 10S s SSD encryption has little impact on performance, but significantly improves security.

3.Tune in. BIOS

For additional protection, it is worth setting up BIOS:

• 🔐 Set a password to enter the BIOS (Security → Set Supervisor Password);
• 🔄 Turn off the download from external devices (Boot) → Disable USB/CD-ROM Boot);
• 🔋 Enable Secure Boot (Rootkits Protection).

To enter BIOS on the RedmiBook 10S, When loading, hold the key. F2 (on some models, Del).

⚠️ Note: If you have enabled Secure Boot but plan to install Linux or other OS, disable this feature first.

Installation of the necessary software

Once you've set up the system, it's time to install software to make it work. Here's the minimum set for RedmiBook. 10S:

For RedmiBook. 10S useful:

• 🎮 Xiaomi Game Turbo – Optimizes performance in games (download from Xiaomi website);
• 📊 HWMonitor – Monitoring temperature and voltage components;
• 🔊 Equalizer APO — fine tuning of sound (useful for built-in speakers).

When installing programs, make sure that no additional tools or software are installed. Always choose Selective Installation and uncheck unnecessary components.

💡

Do not install “optimizers” like Advanced SystemCare or Driver Booster. These often contain adware and may conflict with Xiaomi drivers.

FAQ: Frequent questions about setting up RedmiBook 10S