How to Set Up the New Xiaomi Redmi 10: A Complete Guide from Unpacking to Fine Optimization

The first steps with a new smartphone: what to do immediately after purchase

Congratulations on the acquisition of Xiaomi Redmi 10, one of the most balanced budget smartphones of 2021! Even if you have never used Xiaomi devices before, the setup will not take more than 20 minutes, if you follow the proven sequence, the main thing is not to miss key stages, which then have to be fixed manually.

The first turn on is always accompanied by a wizard of initial configuration, but many users are in a hurry to skip it, losing the ability to optimally configure the system out of the box. In this article, we will discuss not only the basic steps (language, Wi-Fi, Mi Account), but also hidden settings. MIUI, What the manufacturer doesn't advertise, like how to disable unnecessary system applications or adjust gestures for easy navigation.

We will pay special attention to safety: on Redmi 10 The default features are enabled that can transfer data to Xiaomi (such as Mi Analytics and Personalized ads).We will show you how to deactivate them without compromising functionality. 64/128 GB depending on the version).

Unpacking and first turn on: what to check before setting up

Before you press the power button, make sure that all components are present in the box. For Redmi 10 (model number) M2101K7AG) standard set includes:

• 📱 Smartphone in protective film (screen is already glued at the factory)
• 🔌 Cable USB Type-C (length 1 m, no fast charging)
• 🔋 Charger 10W (In some regions, it may not be available)
• 📄 Short guide and warranty card
• 🔧 Paperclip for the tray SIM-Cards (sometimes replaced with plastic keys)

Warning: If there is no paper clip in the box, do not try to open the tray SIM-You can use a needle or a pin to damage the machine, so you can use an unburdened paper clip or go to a service center.

⚠️ Warning: Before you turn on, charge your smartphone to at least 20%. Redmi 10 has a 5,000 mAh lithium polymer battery, and a deep discharge can shorten its life. If the battery is completely discharged, plug the charger in and wait 5-10 minutes before turning on.

You can now set up. Press and hold the power button (on the right side) until the Redmi logo appears. The first turn on can take up to 2 minutes - this is normal, since the system performs the initial initialization.

The master of initial settings: step-by-step instructions

Once you boot the system, you'll see a welcome screen with a choice of language (MIUI Setup Wizard, which will help you to adjust the basic parameters:

1. Select the language and region: Set Russian (Russia) or another language you want. Choose the region carefully: it depends on the available services (for example, Google Play may not work in some countries).
2. Wi-Fi Connection Select your network from the list. If you don't have Wi-Fi, you can skip this step and connect later via mobile Internet. However, without the Internet, you won't be able to download updates and log in to your Mi Account.
3. Authorization in the Mi Account There are two options: 🔑 Sign in to an existing account (if you already have Xiaomi devices) 🆕 Create a new account (recommended for synchronizing data and accessing branded services)

Important:

Mi

Find Device

Mi Cloud

Setting up the lock screen

Select the unlock type: PIN, pattern lock or Password. Fingerprint and facial recognition are set up later in the Settings menu → Screen lock and password.

Data recovery

If you have a backup from another Xiaomi device, you can recover the data here. For beginners, it is better to choose Set up as a new device.

Setting up Google services

Sign in to a Google account (required to access the Play Market) If you don't have an account, create it right at this point.

Personal data and analytics

Here, Xiaomi offers to enable Personalized Ads and Send Usage Data, and we recommend disabling both options as they collect information about your activity.

Once you've completed the customization wizard, you'll be on the home screen, but that's not all, and then we'll optimize the system for maximum performance and security.

Russian language and region of Russia selected

Wi-Fi or mobile internet connected

Created/authorized Mi Account

PIN or lock password is installed

Authorized Google Account

Unnecessary analytics options disabled-->

Optimization MIUI: What to turn off to make the smartphone work faster

MIUI 12.5 (or the newer version on your Redmi 10) is a powerful shell with many features, but some of them only slow down the system:

1. Disabling unnecessary system applications

Many pre-installed applications (bloatvar) can be safely removed or deactivated.

1. Go to Settings → Applications → Application Management.
2. Click on the three dots in the top right corner and select Show All Apps.
3. Find unnecessary programs (e.g. Mi Browser, Mi Music, Mi Video) and click Disable or Remove Updates.

⚠️ Note: Do not remove system applications marked Android or MIUI In the name, this can cause the smartphone to work in an unstable way, such as Security or Settings, you can't touch it.

2. Set up Auto-Run Applications

Many programs run automatically when you turn on your phone, consuming resources.

1. Go to Settings → Applications → Permissions → Autorun.
2. Turn off auto-run for all applications except instant messengers (such as WhatsApp, Telegram) and system services.

3. Optimization of animation and transitions

To speed up the interface, you can reduce the duration of animation:

1. Activate Developer Mode by tapping 7 times on the MIUI version in Settings → About Phone.
2. Back to Settings → Additionally. → For developers.
3. Find the points of the Windows Animation Scale, the Transition Animation Scale and the Animator Duration Scale – set a 0.5x value for everyone or Disable.

On Redmi 10 with Qualcomm Snapdragon 480 processor, disabling animation gives a smoothness gain of up to 15-20%, especially noticeable when opening heavy applications.

💡

If after optimization some applications stopped working correctly (for example, no notifications come), check the permissions in Settings. → Annexes → Permission management. Often the problem is solved by turning on the background activity for messengers.

Security setting: how to protect data on Redmi 10

Security is one of the most important aspects when setting up a new smartphone.The Xiaomi Redmi 10 offers multiple layers of protection, but some features need to be manually configured.

1. Screen lock setting

By default, the following unlocking methods are available on Redmi 10:

• 🔢 PIN (recommended for balance of security and convenience)
• 🔄 pattern lock (less reliable but convenient)
• 🔑 Password (the most reliable, but longest to enter)
• 👆 Fingerprint (fast and safe, but requires a clean sensor)
• 👤 Facial recognition (comfortable but less reliable in the dark)

For maximum protection, we recommend combining a PIN code. + To add a fingerprint:

1. Go to Settings → Screen Lock and Password → Add a fingerprint.
2. Follow the instructions on the screen, putting your finger at different angles.
3. Keep up to 5 prints (for example, thumb and index finger of both hands).

2. Encryption of the device

If sensitive data is stored on the phone, turn on encryption:

1. Set a PIN or lock password.
2. Go to Settings → Additional → Encryption and credentials.
3. Select Encrypt your phone and follow the instructions.

⚠️ Note: Encryption can slow down a smartphone by 5-10%, especially when using microSD cards. If performance is critical, it is better to do without it and store sensitive data in encrypted containers (for example, in the case of microSD cards). Keepass2Android).

3. Setup of permissions for applications

Many apps request access to contacts, location or camera without real need to, to limit them:

1. Go to Settings → Applications → Permissions Management.
2. Select a category (e.g. Camera or Location).
3. Disable access for apps that don’t need it (for example, why should Facebook know your location in the background?).

Mobile Network Connection and Wi-Fi: Connection Optimization

Redmi 10 is backed by 4G LTE, Wi-Fi 5 (802.11ac) And Bluetooth 5.0, but you have to adjust the settings correctly to make the network work properly.

1.Tune in. SIM-map

Redmi 10 has a hybrid tray for two nano-SIMs or one SIM + microSD to insert cards:

1. Turn off the phone.
2. Put the paperclip in the hole on the left side and remove the tray.
3. Install. SIM-map 1 supportive 4G, map 2 — only 2G/3G, if not activated 4G+ customized).
4. Turn on the phone and check the signal.

If your smartphone doesn’t see the network, check:

• 📶 Is it inserted correctly? SIM-map (the chip must be pointed downwards).
• 🔄 Is the regime on? 4G In Settings → SIM-maps and mobile networks → Preferred type of network.
• 📡 Are there any restrictions on IMEI (Checked by the team *#06#).

2. Optimizing Wi-Fi

For a stable connection to Wi-Fi:

1. Go to Settings. → Wi-Fi.
2. Click on your network name and select Change Network.
3. Install. IP-Static address (if the router supports reservations) IP).
4. Enable the option of Automatic Connection.

If Wi-Fi is often turned off, try:

• 🔄 Switch Wi-Fi mode to 5 GHz (less interference but shorter range).
• 📵 Disable Smart Switch in Wi-Fi settings (it may misdetect network quality).
• 🔋 Enable High Performance Wi-Fi in Settings → Additionally. → For developers.

💡

If mobile internet is slow, check your settings. APN. For most Russian operators, it is enough to select Automatically in Settings. → SIM-maps and mobile networks → Access points (APN).

Personalization: themes, wallpapers and gestures

One of the pluses MIUI — Redmi 10 can change everything from icons to unlock animations.

1. Topics setting

Xiaomi offers thousands of free and paid themes in its store to change the subject:

1. Open the Themes app (icon with brush).
2. Choose a category (for example, Dark or Dark). AMOLED).
3. Click Apply to your favorite topic.

To save battery power, we recommend using dark themes, especially on the Redmi 10s. AMOLED-screen (although this model is installed in the IPS LCD, Dark tones still reduce the strain on the eyes).

2. Wallpaper setting

You can change the wallpaper in several ways:

• 🖼️ Through the Topic app (Wallpaper tab).
• 📁 Through the Gallery (select a photo) → Set as wallpaper).
• 🌄 Through Settings. → Wallpaper (dynamic wallpaper available).

For Redmi. 10 screen-resolution 1080×2400 It is better to choose wallpaper in format 1080p or higher to avoid pixelation.

3. Customization of gestures

MIUI Supports two types of navigation:

• 👆 Gestures (steer from bottom to top to return to the main screen).
• 🔘 The classic three buttons: back, home, recent).

To change the type of navigation:

1. Go to Settings. → Display. → Navigation through the system.
2. Choose Gesture Navigation or Navigation Buttons.
3. When selecting gestures, you can adjust sensitivity to Additional gesture settings.

For convenience, we recommend including:

• 🔄 Repeated tap to wake up (double tap the screen to turn on).
• 👆 Raise to wake up (saves power button).
• 📱 Turn to lock the screen (turn the phone down with the screen – it is locked).

Installation of applications and memory optimization

Once the system is set up, it's time to install the necessary applications, but on Redmi. 10 s 4 GB of RAM and 64/128 GB of internal memory need to monitor the free space.

1. Install applications from Google Play

The default on Redmi 10 is Google Play Market, but some users have encountered an error called "Device not certified."

1. Go to Settings → Google → Google Play Services.
2. Click Device Certification and follow the instructions.
3. If the error persists, delete your Google account and add it again.

List of applications to start:

• 📱 Telegram or WhatsApp (messaging devices)
• 🌐 Chrome or Firefox (browser)
• 🎵 Spotify or Yandex Music (Music)
• 📷 Google Photos (Automatic Photo Backup)
• 🔒 1Password or Keepass2Android (passwordman)

2. Memory cleanup

To make room for Redmi 10:

1. Go to Settings. → Memory.
2. Click Clean to remove the cache.
3. In the Storage section, check which apps take up the most space (e.g. Facebook or TikTok can weigh a few gigabytes).

For automatic cleaning:

1. Turn on Optimization. MIUI In Settings → Memory.
2. Install. SD Maid or Files by Google for deep cleaning.

⚠️ Warning: Don't use cleaners like Clean Master or CCleaner, which often delete useful data and display false warnings. MIUI fairly.

FAQ: answers to frequent questions about setting up Redmi 10