Set up a new remote on Xiaomi TV: from connection to troubleshooting

The first time you get acquainted with a new Xiaomi TV often starts with the question: how to tie a remote to it? Even if you bought an original accessory or a universal model, the synchronization process can be difficult. TV Bluetooth remotes or hybrid solutions that combine infrared (IR) and wireless.

In this article, we will analyze all the current ways to connect the remote to Xiaomi Mi TVs. TV, Redmi TV Xiaomi TV A Pro, including models from 2022 to 2026, will teach you how to determine the type of your remote, sync through menus or hardware buttons, and what to do if the TV can’t see the device, and will focus on solving typical problems, from dead batteries to firmware failures.

Important: the instructions in the article are relevant for PatchWall-based TVs (global firmware) and MIUI TV (Chinese version. If your Xiaomi TV Google-based TV (model 2023+ Some menu items may differ – we will mark these nuances separately.

1. How to determine the type of remote: IR, Bluetooth or hybrid

Before you start setting up, you need to understand what type of remote you're dealing with, and the connection algorithm depends on that. Here are the keys:

• 🔍 Infrared (IR): The front panel has a transparent window for transmitting the signal, works only in direct sight, requires directing to the TV. Typical of universal remotes and older Xiaomi Mi models. TV 4A/4C.
• 📶 Bluetooth: No IR-Windows, connects wirelessly at a distance of up to 10 meters. Used in the original remotes Xiaomi Mi Remote (models 2020)+ Some of the most popular ones (e.g. Xiaomi Mi) TV Master Remote).
• 🔄 Hybrid: Combines IR It looks like a Bluetooth remote, but it has a hidden IR-window (usually under the logo) used in Redmi TV X Series and Xiaomi TV Q2.

To accurately identify the type:

1. Turn the remote and find the model on the sticker (for example, R21CN — Bluetooth, YM-F1 — IR).
2. Check for a battery compartment: IR-The remotes usually work from finger batteries (AA/AAA), Bluetooth – from the built-in battery (charged by USB-C).
3. Press the Home button for 5 seconds: if the indicator lights up and the remote vibrates, it is Bluetooth.

If you use a universal remote (such as from Samsung or Philips), it is most likely to be a scalable device. IR. For such devices, you will need to manually configure the codes - we will talk about this in section 4.

💡

The original Xiaomi remote box always has the protocol supported.Look for "Bluetooth Remote" or «IR + Bluetooth».

2. Connecting Bluetooth remote to Xiaomi TV: step-by-step

Xiaomi's modern TVs (starting with Mi) TV 4S 2020 and later) support automatic synchronization with Bluetooth remotes, which takes no more than a minute, but requires consistency:

Make sure the TV is on and on the main menu.

Check the charge of the remote (the indicator should flash when you press the buttons)

Remove old coupled devices in settings TV (If the remote has already been connected)

Place the remote control at a distance of no more than 1 meter from the TV-->

Instructions for PatchWall firmware and MIUI TV:

1. Turn on the TV and wait for the main screen to load.
2. Press and hold the back buttons (back) + Home on the remote simultaneously for 5-7 seconds, until the indicator starts to blink quickly.
3. A notification will appear on the TV saying, "New remote detected." Select "Connect" (or "Pair" in English).
4. If the request does not appear, go to Settings → Devices → Bluetooth and select Add Device.
5. After successful connection, the remote vibrates, and the message “Conjugation completed” will be displayed on the screen.

For Google TVs TV (for example, Xiaomi TV A Pro 2023):

1. Open the Settings. → Remote control → Add the remote.
2. Select “Bluetooth remote” and follow the instructions on the screen.
3. When you request, click OK check-in.

3.Tune in. IR-Remote: manual code entry and automatic search

If your remote uses an infrared protocol (IR), The connection algorithm will be different. Xiaomi TVs support most universal IR-remotes, but may require manual code adjustment.

First, try the automatic search:

1. Point the remote control to the TV from a distance of 1-2 meters.
2. Press the Power buttons. + Menu (or Power) + OK, depending on the remote model) for 3-5 seconds, until the indicator blinks.
3. Press Power and hold until the TV turns off (this means the code is found).
4. Check the rest of the buttons. If some of them don't work, go to manual settings.

For manual code entry:

1. Find the code for your TV model in the remote manual or on the manufacturer's website. For Xiaomi, the most common codes are: 0123, 0178, 0250, 1178.
2. Press the Set (or Setup) on the remote until the indicator flashes.
3. Enter the 4-digit code using digital buttons.
4. Press Power – if the TV is turned off, the code is correct.

If none of the code worked, try an alternative method:

• 🔧 Use the Mi Remote app on your smartphone (available for Android and iOS) to determine your working code.
• 📱 In the app, select "TV» → «Xiaomi» → «Autosearch. Once successfully connected, the app will show you the code used.

💡

IR-remotes do not support voice search and application launch – these functions require a Bluetooth remote or smartphone.

4. Problem Solving: The remote does not connect or malfunctions

Even after you set it up properly, the remote can behave incorrectly, not responding to presses, slogging or turning off, and consider the typical causes and ways to address them.

⚠️ Note: If the Xiaomi Mi Remote (Bluetooth) flashes red and doesn't connect, it could indicate battery discharge.Plug it into charging for 15 minutes - even if the indicator doesn't burn, sometimes the controller blocks work at a critical charge level.

The remote is not detectable by the TV:

• 🔋 Check the batteries/battery. IR-Replace the batteries with new ones (even if they look like workers»).
• 📡 Make sure there are no obstacles (glass, metal) between the remote and the TV. For Bluetooth remotes, the maximum distance is 10 meters without walls.
• 🔄 Reboot the TV: Settings → On TV. → Reboot.
• 🛠️ Reset the remote settings: pinch Home + Back for 10 seconds (to double vibration).

The remote is connected, but not all buttons work:

• 🎮 For IR-Reset the code (see Section 3).
• 🔄 For Bluetooth remotes: Remove the device in Settings → Bluetooth and reconnect.
• 📱 Check if the remote is in conflict with other devices (such as the Mi Band or Xiaomi speaker).
• 🔧 Update the TV firmware: Settings → On TV. → Updating the system.

The remote is automatically switched off:

• 🔋 For Bluetooth models: A dead battery can cause communication breakdowns. Charge the remote for 2-3 hours.
• 📶 Interference from other wireless devices (routers, microwaves) Try changing your Wi-Fi channel to 5 GHz.
• 🛠️ Reset the TV settings to factory: Settings → On TV. → Resetting data (all parameters will need to be reconfigured!).

5.Using a smartphone as a remote for Xiaomi TV

If the original remote is lost or broken, it can be replaced with a smartphone, and this will suit the official Mi Remote app (for Android) or third-party solutions like Unified Remote.

Configure via Mi Remote:

1. Download the Mi Remote app from Google Play or the App Store.
2. Turn on the "Mi Remote" option on your TV: Settings → Devices → Mi Remote → Turn on.
3. In the app, click "Add device» → «Television» → «Xiaomi».
4. Select your TV model from the list (e.g. Mi). TV 4X 55).
5. Point your smartphone at the TV and check the buttons.

Alternative annexes:

• 📱 Unified Remote: Bluetooth and Wi-Fi support (requires a connection to the same network).
• 🎮 Yatse: Remote for Android TV: Extended features for Google TV.
• 🍎 Apple TV Remote: for iPhone owners (works through HomeKit).

⚠️ Note: When using a smartphone as a remote control over Wi-Fi, there may be a delay (lag) of up to 0.5 seconds. For games and videos, it is recommended to connect via Bluetooth or use the original remote control.

If your Xiaomi TV is running on Google TV (model 2023+ In order to control from a smartphone, you just need to connect to one Wi-Fi network and use the Google Home application.

6. Update of the remote firmware: when necessary

Rarely, there are times when the remote stops working after updating the TV, because it's because the firmware versions are incompatible, and you need to update the software on the remote.

How to check the remote firmware version:

1. Connect the remote to the TV.
2. Go to Settings → Devices → Bluetooth.
3. Select your remote from the list of associated devices.
4. Click “Information” or “More info” – the firmware version will appear (for example, V1.2.345).

How to update firmware:

1. Make sure the TV is connected to the internet.
2. Go to Settings. → On TV. → Updating the system → Accessories update.
3. If an update is available for the remote, follow the instructions on the screen.
4. Do not disconnect the remote from the TV until the process is complete (it takes 2-5 minutes).

If the update cannot be installed:

• 🔌 Connect the remote to charging and try again.
• 📡 Reconnect the TV to the Internet (preferably via Ethernet cable).
• 🛠️ Reset the remote settings (click Home) + Back to 10 seconds).

💡

After updating the remote firmware, you may need to re-sync. If the buttons are not working correctly, remove the remote from the list of Bluetooth devices and connect again.

7. Configure additional functions: voice search, gestures, backlight

Original Xiaomi remotes (such as Mi) TV Master Remote or Xiaomi TV Remote Pro supports advanced features that can be customized to your needs.

Voice search and assistant:

• 🎤 To activate voice input, press and hold the Microphone button (or Google Assistant on Google models) TV).
• 🗣️ For PatchWall, teams in Chinese and English are supported, such as Open Netflix or Volume 50%».
• 🔍 For Google. TV: Google Assistant supports Russian language.

Gesture settings:

• 👆 Include gestures in Settings → Devices → remote → Gestures.
• 🔄 Gestures available: Shake the remote — return to the home screen. Double tap Home — open the list of applications. Hold Back — screenshot of the screen.

Button lighting:

• 💡 Included in Settings → Devices → remote → Illumination.
• 🕒 You can set up automatic shutdown through 5/10/30 second-of-action.
• 🔋 Lighting increases battery consumption by 15-20%.

Personalization of buttons:

• ⚙️ B Settings → Devices → remote → The button settings can be reassigned to F1–F4 (For example, launch YouTube or Prime Video).
• 🎮 For gamers: the Game button (if any) can be configured to run Google Stadia or Xiaomi Game Center.

FAQ: Frequent questions about setting up the Xiaomi remote TV