Apple smartphone owners often wonder if accessories from other manufacturers are compatible with their ecosystem. TWS-Xiaomi headphones that offer great sound at an affordable price. Fortunately, Bluetooth is a universal standard that allows you to seamlessly connect devices from different brands.
The pairing process usually takes less than a minute, but to reveal the full functionality may require the installation of additional software. In this article, we will discuss in detail all the stages of connection, from basic pairing to fine-tuning touch control through third-party utilities, you will learn how to make gadgets work in harmony, despite the differences in operating systems.
Sometimes users experience difficulties in the first run or loss of connection at the most inopportune time. To avoid disappointment, you need to follow the algorithm of actions and take into account the peculiarities of iOS with external audio devices.
Preparation of headphones and smartphone for pairing
Before starting the process, make sure your Xiaomi headphones are fully charged. Low battery power can lead to unstable connection or interruption of the process (pairing).Put the headset in a charging case and connect it to the network for 15-20 minutes if the indicators show low energy levels.
On the iPhone, you should also check the status of Bluetooth. Open your Settings and make sure the wireless slider is active. It is also advisable to reboot the smartphone to clear the cache of network modules and avoid software conflicts with previous connections.
⚠️ Note: If the headphones were previously connected to another Android smartphone, they may try to automatically connect to it when you open the case. temporarily turn off Bluetooth on the old device or forget it in the headphone settings.
It is important to keep devices no more than one meter apart during setup.The presence of metal obstacles or working microwave ovens can cause interference in the 2.4 GHz range, making it difficult to detect the gadget.
Step-by-step instructions for connecting via Bluetooth
The basic method of connecting doesn't require internet or special cables, you'll only need a standard iOS interface. First, remove both headphones from the charger case at the same time.
Once removed, the displays on the headset should start flashing, signaling that the blinking is not, you may need to force the pairing mode, which we will talk about below. On the iPhone screen at this time, you need to do the following:
- 📱 Open the Settings app and go to the Bluetooth section.
- 🔍 Wait for your model name (e.g. Mi True Wireless Earbuds Basic 2) to appear in the list of Other Devices".
- 👆 Click on the device name to initiate the connection.
- ✅ Confirm the pairing request if it appears in a pop-up window.
Once the connection is successful, the status will change to Connected, and the status bar will have an earphone battery icon, so you can run any media player and check the sound playback, and if the sound is coming, but very quiet, check the volume control on the phone itself and on the headset body.
⚠️ Note: When connecting some models, Xiaomi iOS may ask permission to use the microphone to determine the location.This is a standard procedure for calibrating features, but it is not necessary for basic listening to music.
In rare cases, the system can request a confirmation code, the standard pin code for most Xiaomi and Redmi devices is 0000 or 1234.
Use of Mi Home and Third-Party Utilities
The official Mi Home app in the App Store has limited headphone functionality compared to the Android version. However, it is necessary for initial registration of the device and checking the firmware version. Download the application, create a Mi Account account and add headphones through the "+" button in the upper right corner.
To fully customize touch control and equalizer, iPhone owners often have to resort to the help of third-party developers. The App Store has many analog applications, such as AndroPods or Xiaomi Earbuds, which emulate the functionality of the original software.
Installation of third-party software allows:
- 🎚️ Adjust sensor sensitivity and reassign actions (single, double, triple touch).
- 🎛️ Use a graphic equalizer to correct frequencies.
- 🔋 It is more accurate to track the charge of each headphone and case separately.
- 🔄 Update firmware (firmware) devices directly from the phone.
Security of Third Party Applications
After installing the selected utility, run a scan of the devices. The application will determine the model of your device. TWS-headphones and will offer the appropriate profile settings. be sure to allow access to Bluetooth in the iOS system settings for this application.
Interconnection mode: how to enter forcibly
Sometimes the headphones don’t go into search automatically, especially if they were previously used with another phone, in which case you need to make a forced reset of Bluetooth settings or enter Pairing mode manually.
For most Xiaomi models (AirDots, Redmi Buds), the procedure is this: place both headphones in the case, but do not close the lid. Find the function button on the case case case case case (usually hidden or located behind / below). Press and hold it for 5-7 seconds.
The indicator on the case should start flashing white at a high frequency, which means that the device is ready for a new connection. If there is no button on the case, try the following sequence:
- Remove the headphones from the case.
- Touch the touch zones on both headphones at the same time and hold for 5 seconds until you turn off.
- Press and hold the sensors again (already on the headphones turned off) for about 10-15 seconds until the indicators light up red and then white.
⚠️ Warning: During a setting reset, the headphones may be emitting audible signals or voice prompts in Chinese or English. Don't worry, this is a normal firmware response to the reset command.
Once you successfully enter pairing mode, immediately open your Bluetooth settings on your iPhone. The device’s window of view is limited in time and is about 2-3 minutes.
Control setting and elimination of desynchronization
One of the frequent problems TWS-The headset is a desynchronization of the left and right channel. The sound can only come from one headset, or they can work independently of each other (mono mode:
1. Remove the device from the Bluetooth list on your iPhone (“Forget this device”).
2. Turn off Bluetooth on your phone.
3. Put the headphones in the case and press the buttons (or sensors) for 15-20 seconds.
4. Remove the headphones and wait for them to automatically pair with each other (only one will blink).
5. Turn on Bluetooth on your phone and connect again.Customization of control gestures is critical for comfort. By default, touches can be set to start Siri voice assistant, which is not always convenient. Through third-party apps, you can reassign double tap to switch tracks and triple tap to adjust volume.
☑️ Diagnostics of Sound Problems
If you notice a delay in sound while watching a video, try to switch the codec in the developer settings (if available via jailbreak) or simply reboot the iPhone.AAC protocol, used by default in the iPhone + Xiaomi pair, provides good quality, but sometimes takes time to stabilize the connection.
Compatibility table for models and functions
Not all Xiaomi headphone features are available on iOS in full, and the following is a table showing the differences in functionality for different series of devices when working with the iOS operating system.
| Model headphones | Basic connection | Voice assistant | Update of the PO | Low latency (Game Mode) |
|---|---|---|---|---|
| Redmi AirDots 2 / Basic 2 | Complete. | Siri (through triple touch) | Only through Android/PC | Automatically. |
| Mi True Wireless Earbuds Basic S | Complete. | Siri | Third-party software required | Supported |
| Xiaomi Air 2 / 2S / 2 Pro | Complete. | Siri + Google Assistant | Through the Mi Home app (partially) | Manual activation |
| Redmi Buds 3 Pro | Complete. | Siri | Through the Mi Home clone | Supported |
As you can see from the table, basic audio playback is available for all models without restrictions, but to activate low-latency game mode on some models, a sequence of touches (usually triple tapping on one of the headphones) is required, which is better specified in the instructions for a particular model.
💡
For full functionality of Xiaomi headphones on iPhone often requires a combination of standard settings iOS and third-party applications-clients.
Look at the Bluetooth generation, models with Bluetooth 5.2 and above provide more stable connectivity in noisy airspace, which is typical for large cities with multiple Wi-Fi networks.