How to set up buttons on the Xiaomi remote TV: From basic configuration to advanced functions

Remote control from Xiaomi TV — It's not just a channel-switching device, but it's a modern model, like the Mi. TV Stick Remote, Mi TV Remote Pro or remotes for the Mi series TV Q1E/P1E) They support flexible button settings, voice control, and even smart home integration, but not everyone knows that keys can be reassigned, blocked, or adapted to suit their needs, such as making quick access to Netflix, YouTube, or audio settings.

In this article, we will analyze all the ways to configure the Xiaomi remote TV: From basic pairing with a TV to advanced features like creating macros or resetting to factory settings, we will focus on typical problems — when buttons do not respond, work with delay or conflict with other devices. If you want to optimize your interaction with the TV or restore the remote, this guide will help you get everything right.

1. Basic remote setting: pairing with a TV

Before setting the buttons, make sure that the Xiaomi remote is properly connected to the TV. In most cases, pairing occurs automatically when you first turn on, but sometimes manual synchronization is required - for example, after replacing batteries or resetting the TV settings.

To tie the remote:

• 🔋 Insert batteries (usually 2) × AAA) And make sure they're not discharged. Some models, like the Mi Remote Pro, use an internal battery -- charge it through the battery. USB-C.
• 📺 Turn on the TV and hold the remote to a distance of no more than 3 meters. Press and hold the Menu buttons. + OK for 5 seconds at the same time until the indicator starts to blink.
• 🔄 The TV screen will show a device search notification, confirm pairing if required.

If the remote is not detected, check:

• 📶 Are there any interferences from other IR devices (air conditioners, music centers).
• 🔄 Is the TV firmware updated (relevant for Mi models) TV 4S newer).
• 🛠️ Is the IR panel on the remote not damaged (check through the smartphone camera - when pressing the buttons, an infrared signal should be visible).

⚠️ Note: Xiaomi remotes with Bluetooth support (e.g. Mi) TV Remote Pros can conflict with other wireless devices at 2.4 GHz. If buttons react with a delay, turn off Wi-Fi routers or smart lamps for setup time.

2. Reassign buttons: how to change the functions of the keys

One of the key benefits of Xiaomi remotes is the ability to reassign buttons to your tasks, such as making the Netflix key open Prime Video and the Guide button open YouTube. MIUI TV 3.0 and higher.

Instructions for changing button functions:

1. Open the Settings menu → Devices → DU remote.
2. Select the button settings (or Customize Keys in English).
3. Tap the button you want to change (such as Amazon Prime).
4. In the list of available actions, select a new appointment: 📺 Open the application (any of the installed ones). 🔊 Adjustment of sound (volume, balance, equalizer). 🌐 Quick access to network settings, signal sources, etc. ⚙️ Macros (sequence of commands, for example, "turn on TV" + launch+").

Save the changes and check the button.

On some models (e.g., Mi). TV Q2 2023) Long press is available, so you can assign different actions for short press and long press. For example, a short press of Home opens the main menu, and a long press opens the list of recent applications.

⚠️ Note: After updating the TV firmware, the button settings may reset. To avoid this, export the configuration to the file via Settings → System system → Backup.

Update the TV firmware to the latest version

Check the battery charge of the remote (or replace the batteries)

Write down the current button settings (in case of rollback)

Turn off other IR devices in the room-->

3. Resetting the remote to factory settings

If the buttons are not working properly (e.g., reacting to double taps or not performing assigned functions), a remote reset may be required, which removes all user settings and returns the keys to standard values.

How to Reset Xiaomi Remote TV:

1. Turn off the TV and remove the batteries from the remote for 10 seconds.
2. Insert the batteries back and press the Menu buttons at the same time. + Back + OK.
3. Hold them for 15-20 seconds until the indicator blinks 3 times in a row.
4. Release the buttons, the remote will reset, and now it must be re-coupled with the TV (see section 1).

For Bluetooth remotes (such as Mi Remote Pro), the reset is performed differently:

1. Go to Settings. → Devices → DU remote → Reset.
2. Confirm the action and wait for the remote to restart.
3. After reset, re-pair through the TV menu.

On Xiaomi models TV 2020-2021, resetting the remote via the menu may not work due to a bug in the firmware. In this case, use a physical reset (battery retraction). + button-clamping).

4. Customize voice control and hot keys

Xiaomi remotes of the latest generations (for example, Mi) TV Remote Pro 2023 supports voice control via built-in microphone to activate this feature:

1. Make sure your TV is connected to the internet (voice commands are handled by Xiaomi’s cloud service).
2. Press and hold the Microphone button (or Google Assistant, depending on the model).
3. Speak the command in Russian or English, for example: 🔍 "Find the Lord of the Rings movie"". 📺 "Turn on channel 1". 🔊 "Turn up the volume by 20%".

If the voice assistant does not respond:

• 📶 Check your Internet connection (minimum speed – 5 Mbps).
• 🎤 Make sure the microphone is not contaminated (wipe the hole with a dry wipe).
• 🔄 Update the remote firmware through the Settings menu → Devices → DU remote → Update.

In addition to voice control, Xiaomi remotes can configure hotkeys for quick access to functions.

• 🎮 Assign the Game button to automatically switch to Game Mode (low input latency).
• 🌙 Make a long Power press by turning on night mode (warm lights) + brightness).

💡

If the voice assistant understands error commands, try switching the language in the remote settings to English – sometimes recognition works more accurately.

5. Solving typical remote button problems

Even after setting the Xiaomi remote button correctly TV They can malfunction. Let's look at some of the most common problems and how to fix them.

Problem 1: Buttons react with a delay

Causes and solutions:

• 📶 Weak Bluetooth signal: Bring the remote closer to the TV (maximum 5 meters) and remove interference (other wireless devices).
• 🔋 Discharged batteries: Replace the batteries, even if the indicator shows charge. On the remotes with the battery, check the level of charge in the Settings menu → Devices.
• 🔄 System Overload: Close background apps on your TV through Settings → Annexes → Launched.

Problem 2: The individual buttons do not work.

Possible causes:

• 🛠️ Mechanical damage: Check if the button is stuck (carefully rinse the remote with alcohol).
• ⚙️ Settings conflict: Reset the remote to factory settings (see Section 3).
• 🖥️ Firmware failure: Update the TV and remote.

Problem 3: The remote controls other devices

If not only the TV, but also the air conditioner reacts when pressing the buttons:

• 🔍 Check if the IR signals are the same (this happens with universal remotes).
• 📱 Use the Mi Remote app on your smartphone to diagnose signals.
• 🔄 Reconfigure the remote in IR learning mode (available in the Settings menu) → DU remote → Additionally).

⚠️ Attention: On Xiaomi remotes with support NFC (Like Mi. TV Master Remote may conflict with bank cards or tags: Keep the remote away from your wallet or disconnect NFC customized.

6. Update of the firmware of the remote and TV

Many button problems are solved by software updates. Xiaomi regularly releases patches for remotes, fixing bugs with delays, incorrect keyboard operation and voice control.

How to update the remote firmware:

1. Go to Settings. → Devices → DU remote → Update of the PO.
2. If a new version is available, confirm installation. Don't turn off the TV during the process!
3. After the update, restart the remote (remove the batteries for 30 seconds).

If the automatic update does not work:

• 📥 Download the latest firmware for your remote model from the official Xiaomi website (Support section).
• 💾 Save the file to the flash drive in format FAT32.
• 📺 Connect the flash drive to the TV and update the software through Settings → System system → Update through USB.

For Xiaomi TVs, current firmware versions can be checked by model on the Mi Support website. TV Q1E 2023 Last firmware at the time of writing — MIUI TV 4.1.23.

💡

Updating the firmware of the remote and TV should be performed simultaneously – this ensures compatibility and stable operation of the buttons.

7. Alternative ways to control the TV

If setting up a standard remote does not give results, you can use alternative management methods Xiaomi TV:

1.Mi Remote app on smartphone

The official Mi Remote app (available for Android and iOS) allows you to:

• 📱 Control your TV via Wi-Fi or Bluetooth.
• 🎮 Set up virtual buttons to suit your needs.
• 🔊 Use voice input (if the remote microphone is not working).

To connect the application:

1. Download Mi Remote from Google Play or App Store.
2. Select your Xiaomi model in the list of devices TV.
3. Follow the instructions on the screen for pairing.

Universal remotes

If the native remote is broken, you can use universal models (for example, Xiaomi Mi Universal Remote or Logitech Harmony).

• 🔍 Find your TV code in the instructions for the universal remote.
• 📋 Enter the code manually or use the auto search function.
• 🔄 Check the operation of all buttons and reconfigure if necessary.

3 Manage via Google Assistant or Alice

Xiaomi TVs with Google TV or MIUI TV 4.0+ Supporting voice assistants:

• 🎤 For Google Assistant: Say, OK, Google, turn on Xiaomi TV".
• 🗣️ For Alice (Yandex): Alice, show Netflix on TV".

To activate this feature, connect the TV to your Google account or Yandex in the settings.

💡

If you often lose the remote, turn on the “Search for the remote” function in the Settings menu. → Devices → DU remote → Find the remote, press a button on the TV, and the remote will beep.

8. Frequently Asked Questions (FAQ)