How to set up channels on your Xiaomi TV: a complete guide with photos and tips

Xiaomi TVs are some of the most popular on the market, thanks to a combination of affordable prices, modern technology and a user-friendly interface, but even owners of such devices sometimes have difficulty setting up TV channels. Unlike smartphones, where everything is intuitive, setting up a TV signal requires knowing the nuances of choosing the type of antenna to scanning the frequencies correctly.

In this article, we will discuss in detail all ways to configure channels on Xiaomi Mi TVs. TV, Redmi Smart TV And other models of the brand, from automatic search to manually adding individual channels, you'll learn how to avoid common errors (such as missing a signal after a software update), what settings affect image quality, and what to do if the TV doesn't find any channels. For owners of old models, we have prepared separate recommendations for working with analog broadcasting.

Important: the instructions in the article are relevant for firmware MIUI TV 2023–2026 and cover most models, including the Mi TV 4S, Mi TV Q1, Redmi Smart TV If your TV is released before 2020, some menu items may be different, and we'll mention that too.

1. Preparing Xiaomi TV to set up channels

Before you start looking for channels, make sure your Xiaomi TV is ready for this process. Skipping this stage often leads to errors like “no signal” or an incomplete list of channels.

First, check the antenna connection (DVB-T2) Use a decimeter antenna with standard support DVB-T2, And for cable, it's a special cable from the provider, and the antenna plug has to be tightly inserted into the connector. RF IN If you use a signal amplifier, turn it on the network.

Second, update your TV firmware. Outdated software may not support new broadcast frequencies or may contain bugs in the channel configuration module. To check the firmware version, go to Settings. → On TV. → Update system. If a new version is available, install it before scanning the channels.

• 📡 Type of antenna: decimeter (DVB-T2), Indoor or outdoor, an amplifier antenna is recommended for remote areas.
• 🔌 Connection: cable must be complete, without inflections. Use adapters only when necessary.
• 📶 Signal: If the TV shows a low signal level (less than 50%), try reorienting the antenna.
• 🔄 Reset: If previously channels were set up with errors, reset TV settings to Settings → System system → Reset.

⚠️ Note: If you are connected to cable television (for example, from Rostelecom or MTS), check with the provider whether a special setup is required. CAM-module or smart card, without which some packets of channels may not open.

2. Automatic channel search on Xiaomi TV

The easiest way to set up channels is to use automated search. Xiaomi TVs support scanning as digital (DVB-T2), analogue channels and cable television (DVB-C). Let's look at the process by step:

1. Turn on the TV and press the Menu button on the remote (or the Settings button on some models).

2. Go to the Settings section → Channels → Channel setting.

3. Select Automatic Search and specify the signal source:

- antenna (DVB-T2) — digital-only;

- Cable (DVB-C) — cable-TV;

Antenna (analogue) - for outdated analog broadcasting (available on all models).

4. Click Next and wait until the search is complete. The process can take 2 to 10 minutes depending on the number of channels, and when completed, the TV will save the channels found and suggest that they be sorted.

If the automatic search does not give results, check:

• 🔍 Is the broadcast region (in channel settings) right? For Russia, it's usually Russia (DVB-T2).
• 📶 Signal level in the setting menu (must be at least 60% for stable reception).
• 🔄 Availability of firmware updates (sometimes new multiplexes are added only in the latest versions of the software).

Manual addition and sorting of channels

Automatic search doesn't always find all the channels available, especially if the signal is weak or broadcasting at non-standard frequencies, and manual tuning will help in such cases, and it's also useful if you need to add a specific channel that wasn't automatically found.

To add the channel manually:

1. Go to Settings → Channels → Channels → Manual search.
2. Select the signal type (DVB-T2 or DVB-C).
3. Specify the frequency of the multiplex (for example, 546 MHz for the first multiplex in Moscow).
4. Click Search and wait for the channels to be found.
5. Save the channels found by pressing OK.

Once you add channels, you can sort them out.

1. Go to Settings → Channels → Channel Management.
2. Select a channel and press the button. OK remote.
3. Use the Up/Down buttons to change the position in the list.
4. To remove the unnecessary channel, select it and click Remove.

Refining Multiplex Frequencies for Your Region|

Check the signal level in the TV menu|

Turn off automatic channel sorting|

Write down the names and numbers of the channels you need|

Connect an external amplifier (if the signal is weak)-->

In Xiaomi TVs with firmware MIUI TV 5.0 and later, we have Favorite Channels, which allows you to create a separate list of frequently viewed channels. OK on the remote on the desired channel and select "Add to favorites".

4. Set up cable television (DVB-C)

If you are connected to cable TV (for example, from providers Rostelecom, MTS or Tricolor), the setup process will be slightly different, the main difference is the need to specify the network parameters that the provider provides.

Instructions for DVB-C:

1. Go to Settings. → Channels → Channel setting → Cable (DVB-C).
2. Select Manual Search (if the automatic search didn’t work).
3. Enter network parameters: - Symbolic speed (e.g. 6875 kSmv/s); - Frequency (e.g. 314 MHz); - Modulation (typically 256 QAM).
4. Click Search and wait until it is completed.

If the provider uses encrypted channels, it will be necessary to CAM-module and smart card. Put the module in the connector. CI+ on the back of the TV and follow the provider's instructions for activation.

⚠️ Note: Some providers (e.g. Akado) use custom network settings. If the TV doesn't find channels, ask the provider for a settings file (.ini or.dtv) and download it via the channel. USB-drive in the Settings section → Channels → Import settings.

5. Solving Channel Configuration Problems

Even with the right actions, sometimes mistakes occur, and let's look at some of the most common problems and ways to solve them.

Problem 1: The TV doesn't find any channels.

• 📵 No signal: check antenna/cable connection, signal level in TV menu.
• 📍 Incorrect region: in the settings of channels, select the right country (Russia for the first time) DVB-T2).
• 🔄 Older Firmware: Update TV Software.
• 🛠 Hardware malfunction: if the antenna entrance is damaged, contact the service center.

Problem 2: Channels found, but no image. Solutions:

• 🔒 Encrypted channels: required CAM-module or smart card from the provider.
• 📶 Weak signal: Try the amplifier or reconfigure the antenna.
• 🔄 Resetting: Return channel settings to factory settings (Settings) → Channels → Reset).

Problem 3: The channels disappear after the firmware update.

• 🔄 Re-search the channels after the update.
• 📥 Check if the settings in the region have been reset (Settings) → Channels → Region).
• 📋 If the channels are gone after reset, restore them from a backup (if it was created).

6. Additional settings to improve broadcasting quality

Once the channels are successfully configured, you can optimize the image and sound quality, and here are some useful settings:

1. Image optimization:

Go to Settings. → Image and customize:

• 🎨 Image Mode: Choose Cinema for Natural Colors or Dynamic for Bright Picture.
• 🔍 Clarity: Increase Sharpness to 50-60% for improved detail.
• 🌈 Color Temperature: Set Warm for Comfortable Viewing in the Evening.

Sound adjustment:

In the Settings section → Sound:

• 🔊 Set Mode Movies or Music Depending on Content.
• 🎧 Activate Night Mode if you watch TV late at night (reduces the volume of explosions and increases dialogue).
• 🔄 Turn on Auto Volume Alignment to avoid sudden jumps in sound between channels.

3. setting up parental control:

If you have children in the house, you can limit access to certain channels:

1. Go to Settings → Channels → Parental Controls.
2. Install. PIN-code (default: 0000 or 1234).
3. Select the channels you want to block and save the settings.

💡

If your Xiaomi TV supports Dolby Vision, or HDR10+, Enable these modes in the image settings (Settings) → Image: → This will improve contrast and color reproduction on compatible channels (e.g, 4K-broadcasting).

7.Configure channels on older Xiaomi models (until 2020)

Owners of Xiaomi Mi TVs TV 3, Mi TV 4 (early versions) and other models released before 2020 may face a lack of some features on the menu. DVB-T2, a Analog channel settings are brought to the fore.

For these TVs:

1. Use manual search with multiplex frequency (relevant data for your region can be found on the RTRS website).
2. If automatic search does not find digital channels, update the firmware manually. Download the latest version for your model from the official Xiaomi website and install it through the official Xiaomi website. USB.
3. To improve the signal, connect the external DVB-T2 tuner HDMI (If there is no built-in digital receiver in the TV).

Older models may also lack support. HEVC (H.265) — A codec used to compress video in digital TV, if the channels are in place but are not being played (black screen or artifacts), it's a sign of incompatibility.

💡

On Xiaomi TVs 2018-2019 release sometimes helps resetting settings to factory with subsequent software updates. This can "unlock" hidden features, such as support for new multiplexes.

8. Alternative ways to watch TV on Xiaomi

If setting up on-air or cable channels is difficult, consider alternatives:

1. IPTV via:

Xiaomi TVs on Android platform TV support IPTV-players, such as:

• 📺 SS IPTV — playlist-enabled.m3u.
• 🌍 Lazy IPTV — It allows you to add channels through EPG (telecast).
• 🔴 TiviMate – a paid application with advanced features (recommended for continuous use).

To set up IPTV:

1. Install the app from Google Play Market on your TV.
2. Download the playlist of channels in format.m3u (You can find it on thematic forums or get it from the provider).
3. Upload the playlist to the app and sync. EPG (television).

2. Connection of the console:

If the TV's built-in tuner is not able to receive the signal, use an external set-top box (for example, Xiaomi Mi Box or Nvidia Shield). HDMI and configure channels through console applications.

Streaming services:

Many channels are available in the services:

• 🎬 Wink and MTS TV - paid packages with live TV.
• 📺 YouTube – some channels are live streaming.
• 🌐 Platon TV - free air channels in good quality.

⚠️ Attention: When in use IPTV-Avoid playlists from unreliable sources, which may contain viruses or illegal content, which will lead to blocking. IP-The address of your TV provider.

FAQ: Frequent questions about setting up channels on Xiaomi TV