How to set up channels on a Xiaomi 32-inch TV: a complete guide with photos and tips

Why setting up channels on Xiaomi TV 32 inches can cause difficulties

Xiaomi’s 32-inch Mi TV 4A/4S/4C series is in steady demand due to its price-performance mix. However, many users face problems when setting up their first broadcast or cable broadcast, ranging from incorrect antenna settings to Xiaomi’s PatchWall firmware.

Unlike Samsung or LG TVs, where channel search is often automatically triggered when first turned on, Xiaomi requires manually running the process. Moreover, the search algorithm depends on the signal type (digital DVB-T2, analog, cable DVB-C), the broadcast region and even the firmware version. For example, in the models of 2023-2026, the location of the antenna settings in the menu changed, which confuses the owners of old instructions.

This article will help you understand everything from choosing the right source of the signal to solving common mistakes like no channels or constant freezes during scanning, we will look at automatic and manual search, optimization of the channel list, and even alternative ways to watch TV over the Internet.

📊 What type of broadcasting do you use?

Digital Etheric (DVB-T2)

Cable (DVB-C)

Satellite (DVB-S)

Analog

I don't know.

Preparing the TV for channel settings

Before you start searching for channels, make sure that the Xiaomi 32 TV is properly connected to the signal source.

📡 Antenna: for broadcasting (DVB-T2) Use a decimeter-enabled indoor or outdoor antenna. Make sure the cable is connected to the connector. RF IN back-end.
🔌 Cable TV: if you have a operator like Rostelecom or MTS, connect the cable to the same connector RF IN, But select the signal type in the settings. DVB-C.
🛠️ Power: Avoid using extension cords – connect the TV directly to the socket to rule out failures when scanning.
🌐 Internet: To update the list of channels or use IPTV Connect TV to Wi-Fi or Ethernet.

Pay special attention to the antenna cable. A damaged or defective cable can cause a weak signal, which prevents the TV from finding part of the channels. Check the integrity of the braid and the central vein - they should not be bare or broken. If you use an extension cord, its length should not exceed 10 meters (for passive antennas).

⚠️ Warning: If you connect to a collective antenna in an apartment building, make sure the home network supports digital broadcasting. In older homes, you may need to install a customized antenna.

Antenna/cable connected to RF IN| connector

TV is plugged in without an extension |

Selected the correct signal source (TV, not HDMI)|

Updated TV software (relevant for models 2022)+)|-->

Automatic channel search: step-by-step instructions

The easiest way to set up channels is to use automated search, which is suitable for most users if the signal is stable and there are no specific requirements (for example, manual sorting).

Turn on the TV and press the Home button on the remote.
Go to the Settings section (cog in the upper right corner).
Select Channels → Channel Configure → Auto Search.
Specify the signal type: Digital Ether (DVB-T2) for terrestrial broadcasting; Cable (DVB-C) if connected through the operator; Analog only for old transmissions (not recommended).

Click Launch Search and wait until it is completed (usually 5-15 minutes).

When scanning, the screen will show progress and channels found, and if the process is 0% or 100% frozen for more than 10 minutes, this is a sign of a signal or firmware problem, then interrupt the search with the Back button and check the antenna connection.

Signal type	Search speed	Number of channels (average)	Typical problems
DVB-T2	5-10 minutes	20–30	There are no regional channels
DVB-C	10-15 minutes	50–150	Operator parameters are required
Analog	3-5 minutes	5–10	Interference, poor image quality

💡

If the TV doesn’t find channels in automatic mode, try resetting the broadcast settings to factory: Settings → Channels → Reset TV settings. This often helps with failures after a software update.

Manual Channel Configuration: When and How to Use

Auto-search doesn't always work, for example, if you live in a border area and you're picking up a signal from a nearby region, or if a cable operator uses non-standard frequencies, and manual tuning will help.

For manual search:

Go to Settings → Channels → Manual search.
Select the signal type (DVB-T2 or DVB-C).
For DVB-T2, specify: Country: Russia (or your region); Multiplex Frequency (e.g., 546 MHz for the first multiplex in Moscow); Bandwidth: 8 MHz.

For DVB-C, you will need the operator parameters:

The speed of symbols (6875 ks/s)
Modulation (256 QAM);
Frequency (e.g. 314 MHz).
Click Search and wait for the result.

If you don't know the DVB-C, you can check it out with the provider or on its website. For example, Rostelecom has a section with settings for different regions. For DVB-T2, multiplex frequencies can be found on the RTRS website - enter your city and see the current data.

⚠️ Attention: When manually adjusted DVB-C If the TV is not signaling, or if it's not signaling correctly, double-check the input.

Where to find multiplex frequencies for your region?

On the official website of RTRS, select the tab "Coverage map", enter the village and look at the frequencies for the first and second multiplexes. For example, in Moscow it is 546 MHz and 498 MHz respectively. For cable TV, check with the operator - they can differ even in neighboring houses.

Channel list optimization: sorting, deleting, selecting

Once you've done a successful search, you'll get a list of channels, but it often needs to be reworked, take, stream, or inconvenient order.

📝 Sorting: Go to Settings → Channels → Channel control. You can drag and drop channels in the right order here (hold the button). OK remote).
🗑️ Delete: select an unnecessary channel and press the Red button (or Menu) → This is useful for removing duplicates or advertising channels.
⭐ Favorites: Mark frequently watched channels with an asterisk (Green button on the remote) so that they appear in a separate tab.
🔍 Search: Press the Microphone button on the remote and say the channel name (works only for models with Google Assistant).

If you have Mi. TV 4A 32" with PatchWall firmware version 3.0+, There's an additional function called Parental Control, which allows you to hide individual channels under the control of the parent. PIN-code, which is useful if you have children in the house:

Go to Settings → Channels → Parental Controls.
Set the PIN (by default 0000 or 1234).
Select channels to lock.

💡

Update the channel list regularly (every 1-2 months) as operators can change frequencies or add new multiplexes.

Problem Solving: No signal, no channels are found, search freezes

Even with the right setup, there can be failures, and let's look at the typical errors and how to fix them:

Problem.	Possible cause	Decision
No signal (0%)	Cable's damaged, weak signal.	Check the cable, try another antenna.
Found 0 channels.	Incorrect signal type or region	Make sure you choose DVB-T2 (not analogue)
Search is 99% frozen.	Software failure or memory overload	Reboot the TV, reset the channel settings
No sound on some channels.	Unsupported audio codec	Update your firmware or use external acoustics

If the Xiaomi 32 TV doesn’t find channels despite the right settings, try the following steps:

Reset TV settings: Settings → Channels → Reset TV settings. This will delete all saved channels and return the settings to factory.
Software Update: Go to Settings → About TV → Update system and install the latest version. firmware 2023-2026 fixes DVB-T2 scanning errors.
Test antenna: connect the antenna to another TV, or use the DVB-T2 set-top box for diagnostics, and if there's a signal on another device, the TV is a problem.
Alternative source: If over-the-air TV is not available, try IPTV via SS IPTV or Peers.TV apps (installed from Google Play).

⚠️ Attention: In Mi models TV 4C 32" with an Amlogic processor T962 You may experience a bug where the TV forgets channels after it's turned off. To avoid this, use Standby Mode instead of shutting down the power completely.

IPTV and Alternative Ways to Watch TV on Xiaomi 32

If you don't have on-air or cable TV, or if you want to expand your channel choices, consider IPTV, which is Internet-based.

Connect the TV to Wi-Fi or Ethernet.
Install the application for IPTV: SS IPTV – simple and free; Peers.TV – with support for playlists.m3u; OTT Player – for operators like MTS TV.

Add a playlist:

For free channels, find relevant ones.m3u-files on forums (for example, 4PDA).
For paid operators, use data from your personal account.

Benefits of IPTV on Xiaomi TV: Xiaomi TVs based on Android TV support hardware decoding of streams up to 4K@60fps, which guarantees smooth viewing even with weak Internet (from 15 Mbps).

However, keep in mind that free playlists often contain ads or unstable channels, and for stability, it is better to use official carrier apps.

Alternatives:

📱 Telephone broadcast: via Miracast or Google Cast (if TV supports TV).
💻 PC connection: via HDMI Steam Link for gaming and streaming.
🎮 Preview: Xiaomi Mi Box or NVIDIA Shield for enhanced capabilities.

FAQ: Frequent questions about setting up channels on Xiaomi 32

My Xiaomi 32 TV doesn't find channels automatically.

First, check the antenna connection and signal type (DVB-T2 for over-the-air TV). If the problem persists: Update the TV firmware. Try a manual search that indicates the multiplex frequency. Reset the channel settings to factory. If nothing helps, try connecting the antenna to another device (such as a set-top box) to check the signal.

How do I know what multiplexes are broadcasting in my city?

Go to the RTRS website, select your region and locality, and it will indicate the frequencies for the first and second multiplexes (for example, in St. Petersburg it is 586 MHz and 498 MHz).

Can I record live channels on Xiaomi TV 32?

PatchWall's standard firmware doesn't have an ether recording function, but you can: Use an external one. DVB-T2 recording-enabled tuner (e.g. Selenga) HD950T2). Connect a console with Timeshift function (for example, Xiaomi Mi Box S) + TVHeadend, record the broadcast through IPTV-Applications (if the operator provides such an option).

After the firmware update, all the channels are gone.

This is a well-known problem in firmware in 2023. Solution: Go to Settings → Channels → Reset TV. Run automatic search again. If the channels don't return, try rolling back to the previous version of the software (the instructions are on 4PDA). In extreme cases, perform a full reset of the TV (Settings → About TV → Reset to factory), but this will delete all data, including accounts.

How to set up cable TV from Rostelecom on Xiaomi 32?

To set up Rostelecom (DVB-C): Select the Cable (DVB-C) menu. Specify the parameters (for most regions): Symbols speed: 6875 ks/s; Modulation: 256 QAM; Frequency: check on the Rostelecom website (for example, 314 MHz for Moscow).

Network ID

After searching, channels may not be sorted – use Channel Management to organize.