How to set up channels on Xiaomi TV 4K: full-lead

Xiaomi TVs 4K Android TV Google TV They offer flexibility to customize on-air, cable, and satellite TV, but the settings interface often raises questions among users — especially when it comes to finding channels, sorting them, or fixing signal problems. In this article, we will discuss all ways to configure channels on Mi models. TV 4S/4A/4X/4C/5/5X (including versions 2020–2026 Years), and give tips on optimizing the list of channels and solving typical errors.

It is important to understand that the setup process depends on the type of connection: digital T2, analog, cable (DVB-C) satellite-based (DVB-S). We’ll look at each option separately, and also tell you how to save the settings when you reset your TV or update your firmware. TV 4K or faced with problems after moving - this instruction will help to understand without calling the master.

1. Preparation of the TV for channel settings

Before you start looking for channels, make sure the TV is properly connected to the signal source.

• 📡 Antenna or cable: Connect the coaxial cable to the connector ANT IN The back of the TV. For digital T2, you need a room antenna, for cable. TV — wire-driven.
• 🔌 Power: Make sure the TV is on without the use of extension cords (they can interfere with the network).
• 📶 System: Update the firmware to the latest version through Settings → On TV. → Updating the system.

If you are using a satellite dish, check:

• 🛰️ Connection LNB-plug-in SAT IN.
• 🔧 Adjusting the aperture and the angle of inclination of the plate (relevant for new installations).

💡

If you have a weak T2 digital signal, try using an antenna amplifier or moving it closer to the window, and in urban environments, metal structures and walls can shield the signal.

It is also worth noting that on some Xiaomi models TV (Like Mi. TV 4A 32) no satellite tuner - check the characteristics of your model on the official website. SAT IN No, satellite channels are not possible.

2. Automatic channel search (recommended method)

This is the simplest method that most users can use, and it automatically detects the channels available and stores them in the TV's memory.

1. Open the Settings (button with a gear on the remote).
2. Go to the Channels section → Channel setting → Search engine.
3. Select the signal type: 📺 Digital (DVB-T/T2) — TV-TV. 📶 Cables (DVB-C) — for providers such as Rostelecom or MTS». 🛰️ Satellite (DVB-S) — for plates "Tricolor", "NTV-Plus" and others.

Russia

Belarus

Kazakhstan

OK.

Once completed, the TV will store the channels found in order of detection, and you can immediately start watching or sorting the list (for more on this in the next section).

Make sure the antenna is connected to the ANT IN| connector

Choose the right signal type (T2, DVB-C or DVB-S)|

Check firmware updates|

Disable VPN (if used) |

Make sure there is no interference from other devices (microwaves, radio phones)

-->

On Xiaomi models with Google TV (Like Mi. TV 5X) The path to channel settings may be different: → Television → Sources → On-air TV → If you can't find the Channels section, try searching by settings (lap in upper right corner).

Manual Channel Search: When and How to Use

Autosearch doesn't always do the job -- especially if the signal is weak or the ISP uses non-standard frequencies -- and manual tuning will help, and it's also useful if you want to add a particular channel that wasn't automatically found.

Instructions for manual search:

1. Go to Settings → Channels → Channels → Manual search.
2. Select the signal type (DVB-T2, DVB-C or DVB-S).
3. For digital T2, specify: 📡 Multiplex frequency (e.g. 554 MHz or 770 MHz) varies by region). 📶 Transfer speed (Auto or check with the provider).
4. For cable. TV enter: 🔢 Beginning/end frequency (e.g. 298-862 MHz). 🔑 Symbolic speed and modulation (options provided by the provider).

Search

If a channel is found but does not appear in the list, check:

• 🔄 Age-specific blocking (in parental control settings).
• 📵 Signal (channel information should be level in the menu) >60%).

4. Sorting, removing and editing channels

After searching, you’ll get a list of channels that often need to be reworked: removing duplicates, prioritizing or hiding unnecessary ones. TV 4K:

Removal of unnecessary channels

1. Open the list of channels with the TV button on the remote.
2. Select an unnecessary channel and press OK (or hold for a few seconds).
3. In the context menu, select Delete or Hide.

4.2 Change in channel order

To rewire the channels:

1. Press the OK button on the right channel.
2. Drag it up or down with the arrows on the remote.
3. Press OK to save.

Creation of the Elect

On Google models TV (Like Mi. TV 5X) You can create a list of selected channels:

1. Open the channel you want to add.
2. Press the Favorites button (star) on the remote.
3. Go to the Favorites section of the main menu to quickly switch between them.

If after sorting channels are lost, try resetting the tuner settings through Settings. → Channels → Setting reset. It won't delete the channels found, but it will return them to their original order.

Satellite channel configuration (DVB-S)

For the owners of satellite dishes (Tricolor, NTV-Plus, Telecard), the setup process is more difficult than for terrestrial TV.

• 📡 Properly configured plate (tilt angle and azimuth).
• 🔧 Transponder parameters (frequency, symbolic velocity, polarization).
• 🛠️ DiSEqC switch (if multiple satellites are connected).

Step-by-step:

1. Go to Settings. → Channels → Satellite configuration.
2. Add a new satellite (e.g. Eutelsat) 36E For Tricolor or Yamal 402 for NTV-Plus»).
3. Enter the transponder parameters (example for Tricolor): Value parameter Eutelsat 36.0°E Frequency (MHz) 12226 Polarization Horizontal (H) Symbolic speed 27500 FEC 3/4
4. Start searching for channels (Scan).
5. After you complete, save the list and restart the TV.

If no channels are found, check:

• 🔄 Correct connection LNB-cables (no breaks, connectors tightened).
• 📡 Setting up the plate (use the SatFinder app to check the signal).
• 🔧 Relevance of transponder parameters (they may change - check on the provider's website).

💡

For satellite TV on Xiaomi TV Be sure to turn off the Blind Scan option – it slows down search and may skip encrypted channels.

6. Solving problems with channel setup

If the channels are not found, disappear or show with artifacts, use this troubleshooting manual.

6.1 No signal or channels are found

• 🔌 Check the antenna/cable connection – try another connector or cable.
• 📶 Make sure that your region broadcasts digital T2 (check on the map coverage RTRS).
• 🔄 Restart the TV (Settings) → On TV. → Reboot).
• 🛠️ Reset the tuner settings to factory (Settings) → Channels → Resetting settings).

The channels brake or freeze

• 📶 Check the signal level in the channel information menu (should be >70%).
• 🔧 Turn off the energy saving mode (Settings) → Screen. → Energy consumption mode → High-performance).
• 🛠️ Update the TV firmware (outdated versions may conflict with new codecs).

No sound on some channels

• 🔊 Check the sound settings (Settings) → Sound. → Sound format → Auto).
• 📵 Maybe the channel is broadcasting in a Dolby Digital format that is not supported by your model. Try switching the audio track with the Audio button on the remote.

⚠️ Note: If you are using cable TV from a provider (e.g. Rostelecom), make sure that your tariff includes digital channels. Some operators block access without a console - check this in support.

7. Alternative ways to watch TV on Xiaomi 4K

If you don't have on-air or cable TV, you can watch TV channels online. Here are the best options for Xiaomi TV 4K:

• 📺 Operator applications: Tricolor TV (for satellite subscribers), Wink and MTS TV (for cable tariffs), Amediatheca (films and some TV channels).
• 🌍 IPTV-Players: Peers TV (Supports playlists in format.m3u). SS IPTV (paid but with extended functions).
• 📡 Web versions of channels: Official sites (See TV Center) YouTube (many channels broadcast live).

For IPTV You will need a playlist from the provider (file.m3u). It can be downloaded to the application through USB Or cloud storage, like Peers. TV:

1. Open the app and select Add Playlist.
2. Enter the path to the file or enter URL (if the provider provides a link).
3. Wait for the channel list to load.

⚠️ Attention: Free of charge IPTV-Internet playlists often contain illegal content or malicious links. Use only official sources to avoid blocking IP or problems with the law.

8.Save and transfer channel settings

If you're planning to reset your TV to factory settings or upgrade your firmware, it's helpful to keep your current channel list. --Unfortunately, Xiaomi TV It does not support exporting settings to the file, but there are workarounds:

• 📸 Screenshots: Take a picture of the channel list (click Screen Capture on the remote or use your phone).
• 📝 Manual List: Write down the names and order of channels in a notebook.
• 🔄 Sync with Google Account: On Google Models TV Selected channels are saved in the profile (if synchronization is enabled).

After resetting or updating:

1. Perform a second automatic search.
2. Sort the channels manually, focusing on the stored data.
3. If you use IPTV, Re-upload the playlist to the app.

Some of the other things (for example, on the Mi) TV 4S PatchWall has a backup option in channel settings, which allows you to save the list to the USB-The storage device and restore it later:

1. Connect the flash drive to the TV.
2. Go to Settings. → Channels → Backup.
3. Select Save on USB.
4. After resetting, restore the settings from the backup.db file on the flash drive.

💡

On Xiaomi TVs with firmware MIUI TV (Like Mi. TV 4A) Backup channels only work on USB-file-system FAT32. NTFS or exFAT is not supported!

FAQ: Frequent questions about channel setup