How to set up channels on Xiaomi 32-inch Smart TV TV: guide

Setting up TV channels on Xiaomi Mi TV 32 is a process that seems simple only at first glance, and many users face problems ranging from a lack of signal to a faulty display of the channel list. In this article, we will discuss all the ways of setting up – from automatic search to manual sorting, and also tell you how to avoid typical errors when connecting an antenna or satellite dish.

Feature of Xiaomi TVs with a diagonal 32 inch (models) L32M6-6ARG, L32M6-6ARU, L32M6-6ATV and others) is to use the PatchWall or Google operating system TV (This affects the menu layout and available channel search options, and we'll take both versions of the interface into account to make the instruction fit most devices.

Importantly, if your TV doesn't find channels even after a few attempts, the problem may not be in settings, but in the quality of the signal, the malfunction of the antenna or the amplifier.

1. Preparation of the TV for channel settings

Before you start searching for channels, make sure that:

• 📶 The antenna (or satellite dish) is properly connected to the connector ANT IN It's on the back of a TV set (DVB-T2) Use a decimeter antenna with support for the 470-862 MHz range.
• 🔌 The cable has no visible damage. Pay special attention to the connection points, and often the signal is lost due to oxidized contacts.
• 📡 If you use a signal amplifier, check its power.Some Xiaomi models TV 32 are sensitive to an overloaded signal - in this case, the amplifier is better to turn off.
• 🌐 For satellite TV (DVB-S2) Make sure the dish is tuned to the desired satellite (e.g. Yamal 402 or the other satellite). ABS-2 for Russia).

We also recommend you update your TV firmware to the latest version. → On TV. → Update: Up-to-date firmware fixes channel search errors and adds support for new multiplexes.

⚠️ Note: If you connect your TV through a cable provider (such as Rostelecom or MTS), you may need to CAM-The setup is then done through the operator menu, not the standard channel search.

2. Automatic channel search on Xiaomi TV 32

This is the easiest way that most users can use: an action algorithm:

1. On the remote, press the Home button (home) and select Settings (cog icon).
2. Go to Channels (or Television) → Setting up channels in Google TV).
3. Select Autosetting.
4. Specify the source of the signal: 📌 antenna (DVB-T/T2) — digital-only. 🛰️ Satellite (DVB-S/S2) — if the plate is connected. 📺 Cable (DVB-C) — cable-TV.

Start.

The search time depends on the number of multiplexes in your area. DVB-T2 In Russia, there are usually 20 channels (2 multiplexes), for example, the DVB-S2 — 50 to 200 (depending on the operator package).

If no channels are found, try:

• 🔄 Repeat the search with a different signal type (for example, instead of using a different signal). DVB-T2 choose DVB-T analogue TV).
• 📍 Change the region in settings to the nearest major city (path: Settings) → Region).
• 🔧 Reset channel settings to factory (Settings) → Channels → Reset).

Manual addition and sorting of channels

Automatic search isn't always perfect: some channels can be duplicated, lost, or displayed in a chaotic order, and manual adjustment will help.

To sort the channels:

1. Open the list of channels with the TV button on the remote.
2. Click OK on any channel and hold for 2 seconds – the editing menu will appear.
3. Choose to arrange channels.
4. Move the channels with buttons ↑/↓ remote.
5. To remove the duplicates, press Menu → Delete.

For manually adding a channel (if not found automatically):

1. Go to Settings → Channels → Manual setting.
2. Select the signal type (DVB-T2, DVB-S2 etc.).
3. Enter the parameters manually: For DVB-T2: multiplex frequency (e.g, 546 MHz for RTRS-1). For DVB-S2: Transponder frequency, flow rate (Symbol Rate) and polarization.

OK.

⚠️ Note: When manually adding channels DVB-S2 Make sure to specify the correct DiSEqC (if you use a switch for multiple plates). DiSEqC 1.0 is suitable for most home installations.

Satellite channel configuration (DVB-S2)

If you're connected to satellite TV, the setup process is more complicated than for broadcasting.

• 📡 Accurate setting of the plate on the satellite (elevation angle and azimuth).
• 🔧 Correct transponder parameters (frequency, Symbol Rate, FEC).
• 🛠️ Maybe, CAM-module for encoded channels (e.g. Tricolor or NTV-Plus).

Step-by-step:

1. Connect the cable from the satellite receiver to the connector LNB IN TV-wise.
2. In the menu, select Settings → Channels → Satellite setting.
3. Add a new satellite (e.g. Yamal 402 for Tricolor or Astra) 4A for NTV-Plus).
4. Enter the transponder parameters (can be found on the provider's website).
5. Run a channel search (Scan) LNB or search for a transponder).

For subscribers, Tricolor TV Xiaomi TV 32 an external receiver is required, or CAM-The built-in tuner of the TV does not support decoding the Tricolor signal without additional equipment.

💡

If satellite channels are periodically lost, check the cable for microcracks. RG-6 F-connectors – they provide minimal signal loss.

5. Solving Channel Configuration Problems

If the TV can’t find channels or they are jammed, use this instruction:

To diagnose signal quality:

1. Open the Settings. → Channels → Signal status.
2. Check Signal Level and Signal Quality: 🟢 Green Zone (70–100%) – signal is excellent. 🟡 Yellow Zone (40–70%) – possible interference. 🔴 Red zone (0-40%) – signal is too weak.

💡

If the signal level is below 40%, try rotating the antenna 10-15 degrees or raising it higher. Use the Antenna TV app on your smartphone (available for Android) for fine tuning.

6. Channel list optimization: favorites and parental controls

Once the channels are set up, your list can be optimized:

• ⭐ Favorites: press OK on the channel → Add to your favorites. They'll be accessed by button. FAV remote.
• 🔒 Parental Controls: From the channel menu, select Lock and install PIN-code (default 0000 or 1234).
• 📁 Grouping: Channels can be distributed by folder (e.g., Sport, Children's").

To reset all channel settings to factory:

1. Go to Settings → Channels → Reset.
2. Confirm the action (may be required) PIN-code).
3. After reset, search for the channels again.

If you use IPTV (through apps SS IPTV Lazy IPTV), The channel setting is done in the app itself, not in the TV menu:

1. Install the app from Google Play (on Google) TV) or through Send Files to TV (PatchWall).
2. Download the playlist (.m3u) from your provider.
3. Update the list of channels in the app.

7. Update firmware to improve reception

The manufacturer regularly releases updates that fix channel search errors and add support for new broadcast standards.

1. Connect your TV to the Internet (via Wi-Fi or cable).
2. Go to Settings → About TV → System Update.
3. Click Check for updates.
4. If a new version is available, confirm the installation.

If the update is not available via the Internet, download the firmware manually:

1. Find a TV model on the back (for example, L32M6-6ARG).
2. Download the firmware from the official Xiaomi website.
3. Copy the file to a flash drive (format) FAT32) And plug her into the TV.
4. In the update menu, select Local Update.

8. Alternative ways to watch TV on Xiaomi TV 32

If setting channels through the built-in tuner is difficult, consider alternatives:

• 📱 Mobile operators: MTS TV, Beeline TV or Tele2 TV offer applications with channels without antennas.
• 💻 Streaming services: Wink, Okko, Amediateka – there are free channels in live streaming.
• 📡 External consoles: Xiaomi Mi Box or NVIDIA Shield with support IPTV.

To connect the external console:

1. Connect the device to the HDMI port on your TV.
2. Select the appropriate source of the signal by the Source button on the remote.
3. Set up channels in the console menu.

The advantage of this approach is that it has a stable signal, without depending on the broadcast, and the disadvantage is the possible subscription fee.

💡

If you live in a low signal area, the combination of a satellite dish (for the main channels) and IPTV (for additional) will give maximum choice without interference.

FAQ: Frequent questions about channel setup