Xiaomi TVs with Android operating system TV PatchWall offers flexible options for setting up on-air, cable and satellite TV, but the menu interface may vary depending on the model (Mi). TV 4A, Mi TV Q1, Redmi Smart TV This article will discuss all the ways of configuring channels, from automatic search to manual sorting, and how to solve typical signal or no-channel problems.
The feature of Xiaomi TVs is that they support both traditional signal sources (antenna, cable) and modern formats — IPTV But if you prefer classic TV, it's important to set up channel search properly to avoid taking, no sound, no image artifacts.
1. Preparation of the TV for channel settings
Before you start looking for channels, make sure that the TV is properly connected to the signal source.
- 📡 On-air TV (DVB-T/T2) — An antenna with digital signal support (usually marked as DVB-T2). Multiplexes are relevant for Russia and CIS countries RTRS-1 and RTRS-2.
- 📺 Cable TV – connection via coaxial cable from the provider (for example, Rostelecom, A1). You may need a prefix if the operator uses an encrypted signal.
- 🛰️ Satellite TV – you need to connect a receiver or use a built-in tuner (available on all Xiaomi models).
Also check:
- 🔌 The cable is securely inserted into the connector ANT IN (or RF IN) back-screen.
- 📶 If you use an external antenna, make sure it is directed towards the nearest tower (check the coverage map on the RTRS website).
- 🔄 On some models, the Mi TV P1, Mi TV Q2) The antenna connector can be combined with AV IN — In this case, an adapter will be required.
⚠️ Note: If you connect via the console (for example, for IPTV or satellite TV), the channel setting is performed on the receiver itself, and the TV must be switched to mode. HDMI or AV.
After you connect the cable, turn on the TV and go to the main menu.
- Press the Menu (or Settings) button on the remote.
- Select the Settings (or Settings) section → All settings).
- Go to the Canals (TV Broadcast – the name depends on the model).
2. Automatic channel search on Xiaomi TV
This is the easiest way, and it's the most convenient way for most users, and the TV will find all the channels available in your area by itself. TV 4S, Mi TV 5, Redmi Smart TV X and others.
Steps for Automatic Search:
- In the Channels menu, select Auto Tuning.
- Specify the signal source: antenna (for terrestrial TV). Cable (for cable provider).
- Digital and analogue (if you want to find both types).
- Digital only (recommended for Russia, as analog TV is disabled).
- Press Start and wait until the process is complete (usually 5-15 minutes).
After searching, the TV will save the channels found and suggest that you sort them out.
- 🔌 Correct connection of antenna/cable.
- 📡 Signal availability (in the manual setting menu) → The signal level must be at least 60%).
- 🔄 Search mode (for example, cable TV may need to specify the frequency of the provider).
Check the connection of the antenna/cable |
Select the correct signal source (antenna/cable)|
Make sure the TV is updated to the latest version of the software|
Turn it off. VPN (It may interfere with the definition of the region)-->
| Problem. | Possible cause | Decision |
|---|---|---|
| No digital channels. | Weak signal or wrong antenna | Check the signal level manually, try another cable |
| Only analog channels found | The menu is marked with "Analogue Only" | Start the search again with the option “Digital and analog” |
| Canals found, but no sound. | The Wrong Broadcasting Standard (DVB-T instead DVB-T2) | In manual settings, select the standard DVB-T2 |
| Channel duplicates (for example, Channel One is repeated 3 times) | The TV found the same channels on different frequencies. | After searching, remove duplicates manually in the Channel Management menu |
Manual Channel Customization: When and How to Use
Automatic search doesn’t always work, for example if:
- 📶 The signal is weak and the TV can't see some channels.
- 🔧 Your provider uses non-standard frequencies (relevant to cable TV).
- 🛰️ You are setting up satellite TV with atypical parameters.
In such cases, manual adjustment will help.
- Go to Settings → Channels → Manual setting.
- Select the signal source (Antenna or Cable).
- Enter the settings manually: Frequency (e.g. 474 MHz for RTRS-1 Transmission speed (usually Auto) Modulation (for the purpose of the DVB-T2 — 256 QAM).
Search
Where to get the frequencies for manual search?
- 📡 For on-air TV: check out the RTRS website (select your region).
- 📺 For cable TV: check with the provider (for example, Rostelecom publishes frequencies on its website).
⚠️ Attention: On Xiaomi Mi models TV 4A mi TV 4C In manual mode, you may not have the option to enter the frequency. In this case, use automatic search with pre-setting the region in the Location menu.
If you are setting up satellite TV, you will need additional parameters:
- 🛰️ Satellite (e.g., Yamal 402 or ABS-2).
- 📡 LNB Type (usually Universal or Single).
- 🔍 Transponders (frequency and speed for a particular satellite).
Where to find the settings for satellite TV?
4. IPTV setup on Xiaomi TV: an alternative to terrestrial TV
If you prefer to watch TV over the Internet, Xiaomi supports the Internet. IPTV — protocol IP. This does not require an antenna, but requires a stable network connection (preferably via cable or Wi-Fi 5 GHz).
How to configure IPTV:
- Through the built-in Live app TV: Open the Settings. → Annexes → Live TV. Select Add Playlist and Enter URL from the provider (e.g, http://example.com/playlist.m3u). Save and update the channel list.
Through third-party applications:
- Install. SS IPTV, Lazy IPTV Or TiviMate from Google Play.
- Download the playlist in format.m3u or.
- Set up. EPG (TV programme) if provided by the provider.
Benefits of IPTV on Xiaomi TV:
- 🌍 Access to channels from around the world (including overseas packages).
- 🔄 Ability to rewind ether (if supported by the provider).
- 📱 Synchronize with mobile devices (for example, through Mi Home).
⚠️ Attention: Free of charge IPTV-Playlists often contain unlicensed content, and the use of such sources may violate the laws of your country, and we recommend contacting official providers (for example, Wink, MTS TV).
💡
If, in viewing, IPTV Lags arise, try to reduce bitrate in the application settings, or connect the TV to the router via cable (Wi-Fi may not be able to handle the flow). 4K).
5. Sorting, editing and deleting channels
Once channels are searched, their list often needs to be reworked, such as removing duplicates, changing order, or renaming. On Xiaomi TVs, this is done in the Channel List menu.
How to sort channels:
- Go to Settings. → Channels → Channel management.
- Select the channel you want to move and click. OK remote.
- Use the buttons. ↑/↓ change of position.
- Save the changes with the Menu or Back button.
How to remove or hide channels:
- In the Channel Management menu, select an unnecessary channel.
- Press the Menu button on the remote and select Remove or Hide.
- For mass removal, use the channel filter option (available on some models).
How to rename the channel:
- Select the channel in the list and press Menu.
- Choose to rename (rename)
- Enter the new name using the on-screen keyboard.
On PatchWall models (e.g. Mi) TV Q1E) sorting:
- 🔄 Channels can be dragged right in the list using the remote control.
- 📌 There is a Favorite option for quick access to frequently used channels.
💡
If the channels are lost after sorting, try resetting the tuner settings in the Channel Reset menu, which will not delete the channels found, but will return them to their original order.
6. Solving problems with channel setup
If the TV can't find the channels or they're intermittent, the reasons can be different. Let's look at the typical situations and how to fix them.
| Problem. | Reason. | Decision |
|---|---|---|
| The TV doesn't find a single channel. | Incorrect signal source or tuner disconnected | Check the connection of the antenna / cable, select the correct mode (DVB-T2 for Russia) |
| Channels found, but no image | No broadcast or codec standard is supported | Update your TV or try another signal source |
| The signal is constantly missing. | Weak signal or interference level | Check the cable, use a signal amplifier, or redirect the antenna |
| No sound on some channels. | Incorrect audio settings (for example, AC3 unsupported) | In the channel menu, select Audiopath and change the format to MPEG |
| Channels are duplicated | The TV found the same channels on different frequencies. | Remove duplicates manually in the Channel Management menu |
On Xiaomi TVs with firmware MIUI TV No support for the standard beyond 2021 DVB-T2 HEVC (H.265), It's a high-resolution broadcaster, and it's a must-have update!
What to do if the update does not help:
- 🔄 Try resetting the tuner settings: Settings → Channels → Reset.
- 📡 If you have an antenna problem, check it on another TV.
- 🛠️ On the Mi models TV 4A mi TV 4C You may need to manually firmware tuner (see instructions on the forums). 4PDA or XDA Developers).
How to update the software to Xiaomi TV?
7. Features of settings on different Xiaomi models
The interface and options available may vary depending on the TV model and firmware version.
Android models TV (Mi TV 5, Mi TV Q1, Redmi Smart TV X):
- 📺 Use the standard Live Channels menu to manage the air channels.
- 🔧 Tuner settings are hidden in Settings → The device → Tuner and entrances.
- 🛰️ Support satellite TV through external receivers (built-in tuner is only in top models).
Models with PatchWall (Mi) TV 4A, Mi TV 4C, Mi TV 4S):
- 📡 The channel setting menu is called TV and located on the main screen.
- 🔄 Automatic search is launched immediately upon first activation.
- 📌 No support. IPTV through embedded software – requires the installation of third-party applications.
Models for the Chinese market (Mi) TV 4, Mi TV E):
- 🌏 By default, configured to Chinese broadcasting standards (DTMB instead DVB-T2).
- 🔧 To work in Russia, you need firmware with support for European standards (for example, MIUI TV EEU).
- ⚠️ Manual firmware can lead to loss of warranty!
If your model does not support the desired broadcast standard, consider the following options:
- 📺 Use an external console (for example, Xiaomi Mi Box S).
- 🛰️ Connect the satellite receiver through HDMI.
- 🌍 Go to the IPTV streaming.
8. Alternative ways to watch TV on Xiaomi
If setting up air channels is difficult, consider alternative options:
Streaming services:
- 🎬 Wink, MTS TV, Amediateka – official services with legal content.
- 📺 YouTube TV, Pluto TV — Free foreign platforms (required) VPN).
Connection of external devices:
- 📦 Xiaomi Mi Box or NVIDIA Shield – to access Google Play and install any IPTV-player.
- 💻 Connecting the laptop to HDMI and browser-based.
3. On-air TV via USB-tuner:
- 🔌 USB-tuners (for example, AVerMedia) allow you to receive a signal on the TV without antenna input.
- 📡 Special software installation is required (e.g. TVHeadend).
The advantage of these methods is the absence of dependence on the quality of the air signal and access to expanded content (films, TV series, archives of programs).
💡
If you live in a low signal zone, a combination of satellite TV (for the main channels) and streaming services (for additional content) will be the best solution.