How to customize the image on the TV Xiaomi Mi TV P1: Complete guide with step-by-step instructions

Why the image quality of Xiaomi Mi TV P1 depends on the correct settings

Xiaomi Mi TV TV P1 55, 65 or 75 inches diagonal equipped 4K-Display with Dolby Vision Support, HDR10+ technology MEMC for smoothness. However, even a premium matrix does not guarantee a perfect image out of the box. The manufacturer sets universal factory settings that often do not take into account the lighting in your room, the type of content (movies, games, sports) or personal preferences.

Incorrect settings can cause colors to burn out at high brightness, loss of detail in shadows due to inflated contrast, or unnatural color reproduction at inappropriate temperature. For example, Sport mode by default sharpens the contours, which is good for dynamic broadcasts, but distorts the movie with a natural picture. TV P1 for different scenarios – from watching movies in a dark room to daytime broadcasts in bright sunlight.

Feature of the Mi TV P1 — Advanced image processor with support AI Super Resolution and Dynamic Contrast -- these features can both improve and degrade a picture if you don't know when to turn them on -- we tested all modes and made recommendations based on objective tests with the X-Rite calibrator. i1Display Pro.

Basic image settings: where to start

Before you dive into fine tuning, make sure the TV is operating in optimal baseline mode.

1. Choose the right signal source. TV P1 Press the Source (or Input) button and make sure the port is active. HDMI (for example, HDMI 2.1 for 4K@120Hz) or embedded TV-tuner.
2. Reset the image settings to factory settings, which will eliminate any conflicts of previous calibrations. → Picture → Resetting image settings.
3. Update your firmware. Go to Settings. → On TV. → Update: Up-to-date software fixes color rendering bugs and adds new modes (e.g. Filmmaker Mode in the latest versions).

Once reset, the TV will automatically apply Standard Mode, which can be used as a basis for further adjustment, but we recommend switching to Movie right away, which is the closest to the reference settings. Rec.709 for SDR-content.

Important! If you connect external devices (set-top box, PC, game console), first set the output resolution at the source. For example, for PlayStation 5 or Xbox Series X, select the console settings 4K @ 60Hz or 120Hz (if supported) Otherwise, the TV will scale the signal, leading to artifacts.

Calibration of brightness and contrast: avoid loss of detail

Brightness and contrast are two key parameters that are most often mistuned: Too high brightness clogs up light areas (for example, clouds in the sky become a white spot), and excessive contrast makes dark scenes completely black, losing detail in the shadows.

For fine-tuning, use the test templates. They can be found on YouTube (search for "calibration patterns for"). TV") or download from sites like AVS We recommend using the gray scale and the black crush test).

Turn off all lights in the room (artificial) + daytime)

Set the image mode on the "Movie" (Movie)

Turn off the functions of "Dynamic contrast" and "Local dimming"

Connect the source with test templates (YouTube, USB, HDMI)

-->

Instructions for setting:

1. Brightness: Set the value on the 45-50 (ranged 0–100). Open the test pattern with black bars on a gray background. Turn down the brightness until all shades of black are visible (usually stripes with numbers). 17–23). On Mi. TV P1 optimal value for a dark room — 48, day-view — 55.
2. Contrast: Start with 80-85. Use a pattern with white stripes on a gray background. Increase contrast until the brightest shades start to merge (usually stripes 230-235). TV P1 — 82.

⚠️ Attention! Local Dimming function on Mi TV P1 It only works in Movie and Standard modes, and only turn it on when you're watching movies in a dark room, because it can create a bloating effect during the day).

Color temperature and shades: achieve naturalness

The wrong color temperature makes the picture either too cold (blueish hue) or "warm" (reddish). TV P1 The default is Standard Mode, which often adds excess blue:

Go to Settings. → Picture → Additionally. → Color temperature. Preliminary modes are available here:

• 🔵 Cold - overblown blue component (suitable for brightly lit rooms, but distorts skin tones).
• ☀️ Standard - Balance is close to 6500K, but with a slight shift to blue.
• 🟠 Warm – reduces blue, adds red (better for evening viewing).
• ⚪ Custom – manual settings on RGB--kanalam.

For most scenarios, the User Mode is optimal with the following values (for content) SDR):

• Red (R-Gain): 50
• Green (G-Gain): 48
• Blue (B-Gain): 45
• Tint: 0 (neutral)
• Saturation (Saturation): 50

💡

If you don't have a calibrator, use the gray balance test pattern. The screen should have three gray squares (white, 50% gray, black) - they should not give either blue or red.

For HDR-The color temperature is automatically adjusted, but you can adjust the brightness. HDR Settings menu → Picture → HDR. The optimal value is 80-90 (maximum 100 can lead to burnout of the backlight).

Image modes: which to choose for movies, games and TV

Xiaomi Mi TV P1 It offers 5 pre-modes, each optimized for a specific type of content, and let's look at their features and when to use them:

For game consoles (PS5, Xbox) Always use Game mode. It turns off post-processing, which reduces input lag to ~10 ms. vs. ~30ms in other modes to activate it automatically:

1. Go to Settings → HDMI → HDMI mode.
2. For the port to which the console is connected, select Game Mode.
3. Auto Low Latency Mode (Auto Low Latency Mode, ALLM).

For professional calibration (e.g., video editing), use Filmmaker Mode if available in your firmware. It disables all post-effects and adheres to the standard. Rec.709.

Additional Features: When to Enable and When to Disable

Xiaomi Mi TV P1 It's equipped with a number of image enhancement technologies, but not all of them are useful in every scenario:

• 🎨 AI Super Resolution: Increases content resolution below 4K. Turn it on for Full. HD (1080p), turn off for your own 4K — Otherwise, it'll make noise.
• 🔄 Dynamic contrast: Automatically adjusts brightness. Always turn it off, it creates uneven backlighting.
• 🖼️ Noise suppression: Useful for on-air TV or compressed streams (e.g. YouTube) 720p). For Blu-ray or Netflix, turn off.
• 🎯 MEMC (Movement smoother): Increases frame rate for smoothness. Turn on for sports, turn off for movies (artifacts appear).

💡

Function MEMS on Mi. TV P1 It only works at 60Hz refresh rate. If you play 120Hz, it will shut down automatically.

Pay special attention to the setting of the gamma curve (Settings) → Picture → Additionally. → Gamma. The optimal value is 2.2 (standard for most content); a value of 2.4 will make the image darker and 2.0 too light.

⚠️ Attention! If you notice a flicker of backlight (especially against a gray background), turn off Local Dimming and reduce the brightness to 40. PWM-lighting adjustments on the Mi TV P1 (flickering ~240Hz).

Setup for specific sources: consoles, PC, satellite TV

Each signal source requires a personalized approach, and let's look at the best settings for popular devices:

1. Android connection TV-consoles (for example, Nvidia Shield or Xiaomi Mi Box)

For streaming services (Netflix, Disney)+, KinoPoisk HD):

• Image mode: Movie.
• Color volume: Auto (for HDR).
• Turn it off. AI Super Resolution (the console itself scales content).
• Enable Dolby Vision in the settings of the console.

2. Connecting the game console (PS5, Xbox Series X|S)

For games of 4K/120Hz:

• Use the port. HDMI 2.1 (usually connector 3 or 4).
• Mode: Play.
• In the console settings, select RGB Full (for) PS5: Settings → Screen and video → Video output → Range. RGB).
• Turn off all post-effects (MEMC, Noise suppression).

3. PC connection (Windows/macOS)

To use the TV as a monitor:

• Set the permit. 3840×2160 (4K) upon 60Hz (more comfortable for text than for text) 120Hz).
• In Windows settings, select a profile HDR (if maintained).
• Turn it off. MEMC – this will reduce the delay when working with the mouse.
• To read the text, reduce the brightness to 30-35 and increase the contrast to 90.

4. On-air or satellite TV

To view the broadcasts:

• Mode: Standard or Sport.
• Turn on Noise Reduction (Mediocre Level).
• Set the color temperature on Warm (reduces eye fatigue).
• If the image is "soapy", turn on AI Super Resolution.

💡

For YouTube on the built-in Mi browser TV P1 enforce quality 4K In video settings, by default, the TV can limit the flow to 1080p.

FAQ: Answers to Frequent Questions