How to customize the image on the TV Xiaomi Mi TV P1 43: from basic parameters to professional calibration

Xiaomi Mi TV TV P1 43 with a diagonal of 43 inches and a resolution 4K UHD It offers great value for money, but even the most advanced matrix requires the right setup, and many users face problems: too dull colors when watching movies, blurring in dynamic scenes or incorrect color reproduction in games. The reasons are not in hardware limitations, but in suboptimal factory parameters that Xiaomi sets for all occasions".

In this article, you will find step-by-step instructions for setting up an image – from basic parameters like brightness and contrast to fine calibration of the color profile and modes. HDR. We're also going to break down the hidden settings for gamers, movie lovers and PC-connectors, all based on X-Rite calibrators. i1Display Pro and analysis of reviews of Mi owners TV P1 43 on forums 4PDA and Mi Community.

Particular attention is paid to the problems of a particular model: for example, why when connecting through a HDMI 2.0 can miss the high-resolution signal, or how to fix the soap effect when watching sports, and you will learn which settings to change immediately after unpacking, and which only after a few days of use, when the eyes adapt to the screen.

1. Preparing the TV for image setting

Before you start calibrating, make sure the TV is in optimal operating conditions. - Xiaomi Mi TV P1 43 uses the VA-light-up LED, It's sensitive to outside light and angle of view:

🔹 Place the TV at the right height. Optimal viewing angle — 10-15 degrees below eye level when you're sitting on the couch, which minimizes the color distortions and contrasts that are characteristic of the couch. VA-If the TV is hanging on the wall, use a tilted bracket. 5-10 downward.

🔹 Adjust the lighting in the room. The perfect calibration is dimmed light (nearby). 50-100 The bright sun or total darkness will distort the perception of colors. If there are smart lamps Xiaomi Yeelight, set the color temperature. 4000K — It's close to standard lighting. D65, film-industry.

🔹 Update the firmware. Factory image settings may vary depending on the software version. Check firmware relevance in the Settings menu → On TV. → System Update. At the time of writing, the latest stable version for the Mi TV P1 43 — MIUI TV 3.0.127 (from 15.05.2026).

🔹 Reset the image settings to factory settings. This is important if the previous owner or you have already changed the settings. → Image: → Reset the image settings. Once reset, the TV will automatically apply the Standard profile, which we will optimize.

⚠️ Note: If you connect your TV to the Xiaomi Mi Box or game console, first set up the image settings on the signal source (for example, in the settings). PS5 Apple TV). Many color rendering problems arise from a confluence between the TV and the external device.

2. Basic settings: brightness, contrast and sharpness

These three parameters are the basis of a high-quality picture. TV P1 43 are in the Settings menu → Image: → Additional settings: Here are recommended values for different use cases:

🔹 Brightness regulates the level of black. TV P1 43 below 40, dark scenes are lost (e.g., in the movie "Dune"), and above 60, black turns gray. Use the "Black Clipping Test" on YouTube to check, you have to distinguish between all shades from #010101 to #10101010.

🔹 Contrast is the difference between the brightest and the darkest pixels. The optimal value is 85, but if you look at it, you can see the difference. HDR-content, the TV automatically adjusts this setting. TV P1 43 at contrast above 90, artifacts in the form of "Blooming" (glow around light objects) may appear in bright scenes).

🔹 Sharpness is the most insidious parameter, and many users are maxing it out because they think it's going to get sharper, but it actually adds artificial contours around objects — 10-15, play-off 20-25.

Set brightness in range 45-50 cinematically|Disable "Clear Motion" for Movies|Check the contrast of the test video|Make sure the sharpness is not higher 25 for any scenario-->

⚠️ Note: If after the change in brightness the image became "soapy" (especially noticeable on the channels in the SD-permissions), enable the function "Noise reduction" in the menu Settings → Image: → Image enhancement. However, for content in 4K This option is better to disable - it can blur small details.

3. Color profile and temperature setting

Xiaomi Mi TV P1 43 supports several preset color profiles, but none of them are perfect out of the box. The most problematic moments are the excess green hue in the "Standard" profile and the too cold temperature in "Cinema" mode. Here's how to fix it:

🔹 Color temperature. The best option is "Warm" (6500K), But it may seem yellowish after getting used to cold smartphone screens. The alternative is Manual Customization:

- Red: 50 (base value)

Green: 45 (reduce to remove the greenish tint)

- Blue: 55 (add for balance)

🔹 Color space. For most sources (Netflix, YouTube, cable TV), choose "Auto." If you plug in a PC, force it to install "BT.2020" for HDR-Content or "sRGB" for graphics.

🔹 Saturation and shade. Factory values (50 and 0 So, you don't need to adjust, but if the colors seem to be faded, you can increase the saturation to 55-60, But not higher – otherwise the skin of the actors will look unnatural (the effect of cartoonism").

💡

To fine-tune your color temperature, use the free CalMAN ColorChecker app (available for Android) to help you identify color variations using test patterns.

🔹 The problem with green is particularly noticeable when viewing natural landscapes or scenes with a predominance of gray (for example, in the movie "1917"). If manual adjustment does not help, try an alternative profile:

1. Go to Settings → Image → Image Mode.
2. Choose "Sports."
3. Manually reduce the green channel to 40 and increase the red channel to 55.
4. Save as a user profile.

⚠️ Note: If you connect your TV to your PC HDMI, graphics-card settings (NVIDIA Control Panel or AMD Adrenalin) Turn off color effects like "Digital Vibrance" or "Color Temperature." They conflict with TV settings and can cause color distortions.

4. Optimization for HDR Dolby Vision and

Xiaomi Mi TV P1 43 supports HDR10, HLG And Dolby Vision, but it requires not only the right setup of the TV, but also compatible content:

🔹 How to turn it on HDR:

1. Go to Settings. → Image: → Regime. HDR.
2. Select "Auto" (TV will automatically switch when detected) HDR-signal).
3. Make sure that in the settings HDMI-The port has been switched on the "Improved Format" mode (for ports). HDMI 2.0/2.1).

🔹 Problems with HDR on Mi TV P1 43:

- Dark scenes are too shaded: increase the brightness HDR before 55-60 (Settings menu → Image: → Settings HDR).

Colors appear unsaturated: Enable "Extended Dynamic Range" (ibid.).

Screen flicker: turn off Local Dimming - on this model it does not work perfectly and can create a "stroboscope" effect.

🔹 Dolby Vision requires a separate activation:

1. Download the Dolby Vision certificate from the Settings menu → Additionally. → Licenses.
2. Reboot the TV.
3. Enable mode in Settings → Image: → Dolby Vision (select Dark for theatrical effect or Bright for daytime viewing).

💡

For the right job HDR Make sure the cable HDMI 18Gbps certified (Premium Certified or Ultra High Speed labels must be on the package").

5. Special modes: for games, sports and PC

Xiaomi Mi TV P1 43 has separate profiles for different types of content, but they often require customization:

🔹 Game mode (Game mode):

- Inclusion: Settings → Image: → Image mode → Game.

- Key settings:

- Delayed input (Input Lag): 10-12 MS (with Game Mode enabled).

Clearness of movement: "Middle" (reduces blurring in dynamic scenes).

- HDR for games: turn on "Game" HDR" customized HDMI-port.

- Problems and solutions:

- Artifacts in 4K/120 Hz: Try to use it HDMI-kit-line PS5 Xbox Series X.

Colors are too bright: reduce saturation to 45 and set the color temperature "Normal".

🔹 Regime Sport":

Optimized for watching football matches and races.

- Recommended adjustments:

- Increase sharpness to 35-40 (better to see the ball).

Turn on "Clearness of movement" on "High" (reduces "grease" in fast movements).

Turn off Noise Reduction, it can blur the words on the players' uniforms.

🔹 Use as a PC monitor:

- Resolution and frequency: optimal 3840×2160 (4K) upon 60 Hz. 120 Hz will be required HDMI 2.1 and video card with support DSC (Display Stream Compression).

Scaling: In Windows, set a 150% scale (to make the text readable).

Color profile: Select "sRGB" in the settings of the TV and graphics card.

Mouse problem: If the cursor jumps, turn off Motion Improvement in the image settings.

Enable Game Mode|Set input delay 10-12 miss|Check the cable. HDMI compatible 4K/120 Hz|Calibrate brightness for dark games (e.g. Horror)|Disable post-processing of the image-->

⚠️ Note: When connecting PC to Mi TV P1 43 through HDMI There may be a problem with the signal disappearing at resolution. 4K. Solution: in the settings of the video card (NVIDIA/AMD) Limit the maximum frame rate to 59 Hz instead 60 Hz.

6. Hidden settings and calibration through the service menu

For advanced users who want to make the most of Xiaomi Mi TV P1 43, there's access to a service menu, and you can fine-tune the gamma curve, the color gamut, and even calibrate the white balance by 10 points!

🔹 How to enter the service menu:

1. Turn off the TV.
2. On the remote, simultaneously press the Menu buttons. + Up. + OK.
3. Hold for 5 seconds until the menu appears.

🔹 Useful parameters in the service menu:

Gamma: Set the value of 2.2 (standard for home TVs).

Color Space: Select Auto (Native) for the most natural color reproduction.

- White Balance (10p): If you have a calibrator, you can specify the exact values for RGB different-brightness.

🔹 Dangerous settings (do not change unless necessary!):

Panel Aging: can reset the matrix operating counter.

- EDID Settings: Incorrect values will result in a lack of signal HDMI.

🔹 An alternative method of calibration is through ADB-If you have experience with Android, you can connect to your TV over Wi-Fi and manually set your settings, for example, to set color temperature. 6500K, use the command:

adb shell settings put global display_color_temperature 1

Where 1 corresponds to the "Warm" profile.

7. Frequent image problems and their solutions

Even after the correct setup, Xiaomi Mi users TV P1 43 may have problems. Here are the most common and ways to fix them:

🔹 "Soap Opera Effect (Soap Opera Effect):

- Reason: the function "Clarity of motion" is enabled, or "MEMC" (Motion Estimation, Motion Compensation).

- Solution: Turn it off in Settings → Image: → Improving the image.

🔹 Stripes on gradients (Banding):

The reason: low bit color reproduction (8 bits instead of 10 bits).

- Decision:

- Make sure the source is (e.g. Apple) TV 4K) outputs the signal in 10-bit format.

- Turn on Deep Color for HDMI-port.

🔹 The dark corners of the screen (Vignetting):

- Reason: Feature of Direct illumination LED on VA-panel.

- Decision:

- Increase the brightness to 55-60.

- Turn on "Local dimming" at the "Low" level.

🔹 Screen flickering at low brightness:

- Reason: PWM (pulse-latitudinal modulation) operation at low levels of backlight.

- Decision:

- Set the brightness to 30.

Turn on "Eye Mode" in the image settings (reduces the load on vision, but can increase flickering).

🔹 Incorrect colors when connecting to a PC:

The reason: the conflict of color profiles between the video card and the TV.

- Decision:

- In Windows settings, select a profile "HDR and WCG" (Windows 11).

- In the control panel. NVIDIA/AMD Set "Output dynamic range" to "Full range".

💡

If after updating the firmware colors became unnatural, reset the image settings (Settings) → Image: → Reset) and reset. New versions of the software can reset user profiles.

FAQ: Answers to popular questions