How to set up a gyroscope on the Xiaomi Redmi 9 phone

Modern smartphones are equipped with many hidden sensors that make the use of the device comfortable and functional. One of these key elements is the accelerometer and gyroscope, responsible for determining the position of the gadget in space. Owners of Xiaomi Redmi 9 often face the need to fine-tune these modules, especially if it is a mobile game or automatic turn of the screen.

Sensor malfunctions can be manifested in many ways, from the banal refusal to turn the image when the body changes orientation to serious problems in shooters, where the sight “flies” to the side. This does not always mean a breakdown, often only competent calibration through system tools is required.

In this article, we’ll take a look at how to make your Redmi 9 feel the slightest tilts again, going from basic checks to using an engineering menu to rule out software bugs.

Diagnostics of the sensors on Redmi 9

Before you start complex manipulations, you need to make sure that the problem lies in the software failure, not in the physical damage. First, you should check the basic functionality by running a standard application "Calculator" or gallery and turning the device.

If the screen is delayed or not responsive, you should pay attention to the system settings. In the MIUI shell installed on the Xiaomi Redmi 9, there are separate switches for orientation control, which users often ignore.

It is also important to eliminate the influence of external factors, such as magnetic covers or metal plates, which can create interference that confuses the readings of the magnetometer, which indirectly affects the operation of the gyroscope.

• 📱 Check the autoturn operation in standard applications (browser, gallery).
• 🧲 Remove the protective case if it contains metal inserts or magnets.
• 🔄 Restart the device to rule out temporary software failures.

There is a simple quick checkout method that is available to every Android owner: just enter a special code in the phone app to get into the hardware testing menu.

##6484##

In the CIT menu that opens, you'll find the "Sensor" or "Sensors," and you'll see the current readings of all the sensors, and you'll put your phone on a flat surface, and you'll see the gyro values, which should be close to zero.

Basic calibration through the MIUI engineering menu

The most effective way to return the accuracy of sensors is to use the built-in engineering menu. On Xiaomi Redmi 9, this tool allows you to perform forced calibration without installing third-party software.

To enter the test mode, use the code above. After going to Sensor, look for "Gyro Sensor" or "Gyro Calibration," and the system will ask you to put the device on a completely flat and stationary surface.

Press Calibrate or Start, at which point the processor reads the reference values of the position in space, and do not touch the phone until the message of successful completion appears.

⚠️ Note: Do not calibrate on a vibrating surface or hold your phone in your hands.This will result in incorrect readings and reset settings.

If standard calibration doesn't work, you can try to reset the sensor data through the developer menu, but it requires caution. In most cases, a single routine calibration cycle is enough for the Redmi 9.

Setting sensitivity in gaming applications

Gamers often confuse the system setting of the gyroscope with in-game settings. Popular shooters such as PUBG Mobile or Call of Duty Mobile have their own sensitivity settings menus that overlap system values.

In the game settings, find the "Gyroscope" section, where you can adjust the sensitivity for different sights: hip aiming, optics sight and sniper sight. Xiaomi Redmi 9 with its screen diagonal optimal average values.

It's important to understand the difference between "general sensitivity" and gyro sensitivity, the first responds to touch with your finger, the second responds to the tilt of the device itself, and the confusion in these parameters makes the control seem "sluggish" or too sharp.

• 🎮 Turn on the gyroscope in the main game settings (often it is turned off by default).
• 🎯 Set up a separate sensitivity for the "Aiming" mode (Scope).
• ⚙️ Use the Resetting Gyroscope function inside the game if the values are downed.
• 📉 Start setting up low values, gradually increasing them.

Some users have noted that in MIUI, enabling Game Turbo can affect sensor performance, and try adding the game to the optimization list or removing it to check for the impact on response.

Use of third-party applications for calibration

If Xiaomi’s built-in tools don’t work, specialized tools from the Google Play Store come to the rescue, allowing for deeper diagnostics and forced resetting of sensor parameters.

One of the most popular and trusted apps is the GPS Status & Toolbox, which, despite its name, contains a powerful sensor management tool. Once installed, open the menu and select "A-GPS Status Management."

In the window that opens, click "Reset GPS data" and then "Download A-GPS data." Although this is navigation, the app also initiates a recount of the accelerometer and gyros data. Another option is the Sensor Calibration & Test app.

Using third-party software is safe if you download it from official sources, but you should not install applications with questionable access rights that require permission to read contacts or SMS.

⚠️ Warning: Avoid apps that promise to “boost signal” or “overclock gyroscope” by 200.

Problems with autoturning the screen and their solution

Often, a complaint about a “non-working gyroscope” hides a banal problem with the autorotation of the screen. On Xiaomi Redmi 9, this control is taken to the control center.

Swipe from top to bottom to open the notification curtain. Find the icon with the lock in the circle or the arrows. If "Orientation" or "Portrait Mode" is on, the screen is locked in one position. Press the icon to unlock the turn.

Some versions of MIUI have a bug where the proximity sensor blocks the screen from turning. If you hold the phone over the edge while covering the top, the screen may not respond to the turn, which is a feature of Android to prevent accidental ear pressing.

It's also worth checking the settings of a particular application. Some programs have their own autorotation switch inside the interface that ignores the system settings.

💡

If the screen doesn’t turn in just one app, check its settings or try to update through the Play Market.

Resetting settings and radical methods

When software failures become critical and no calibration helps, the option of resetting is a last resort, but it is effective in 90% of the cases of software errors Xiaomi Redmi 9.

Before starting the procedure, be sure to back up your data. Reset will delete all photos, contacts and apps. Go to Settings → About Phone → Reset.

Select "Erase all data." Once you restart, the phone will return to factory status. The sensors will be recalibrated by factory algorithms. If that didn't work, there's a hardware malfunction.

Hardware gyroscope failure on Redmi 9 is rare, usually after a severe impact or fall, in which case the software calibration will give an error or values will change randomly even at rest.

FAQ: Frequently Asked Questions

💡

If the software methods did not help, and the phone fell, most likely, you will need to replace the gyroscope module in the service center.