How to set up correctly CAM-Module on Xiaomi TV: from connectivity to fine-tuning

What is it? CAM-Xiaomi TV Module and Why You Need It

Xiaomi Mi TVs TV last generations (series) Q2, P1, A2 and others) fitted with built-in or external CAM-These modules allow you to view the pay channels of cable, satellite or terrestrial TV operators without having to buy a separate set-top box. CAM-You can connect the Tricolor TV, NTV-Plus or Telecard card directly to the TV.

However, many users face problems with the first setup: the module is not recognized, channels are not decoded, or errors of type No. CA Module or Scrambled Channel, which can be caused by a faulty connection, or by an outdated firmware on the TV or the TV itself. CAM-In this article, we will look at all the steps from physical connection to fine-tuning of software, and also look at typical errors and how to fix them.

It is important to understand that CAM-The module only works with supported operators, for example, Tricolor TV will require a module that supports the standard. CI+ 1.4, and for some regional providers - special firmware. Before buying the module, check its compatibility with your operator and model of the Xiaomi TV.

Types. CAM-modules for Xiaomi TV: choose

There are several types on the market CAM-modules that differ in support standards, manufacturers and compatibility. for Xiaomi TVs, the following modules are suitable:

• 🔹 CI+ 1.4 is the most common standard for modern operators (e.g. Tricolor, NTV-Plus). HD- and 4K-channels, but requires regular firmware updates.
• 🔹 CI+ 2.0 – a new standard with improved protection and support for interactive services. Compatible with the latest Xiaomi Mi models TV Q2 2023+.
• 🔹 CAM-supportive Conax/Mediaguard — They're used by regional operators, often requiring manual firmware.
• 🔹 Hybrid modules are combined CI+ and a card reader for old cards (e.g. Irdeto) suitable for transition.

For most users in Russia, the module will be the best choice. CI+ 1.4 from Neotion, Sagemcom or SmartiX manufacturers. Note the labeling: the module must have a logo CI+ support MPEG-4/H.265 work properly with HD-channel.

Before buying, check the list of compatible modules on the official Xiaomi website or from your carrier. TV Q1E Neotion module is fine. CI+ 1.4, and for Mi TV P1 You may need to install the TV before the latest version.

Step-by-step instructions: how to connect CAM-module TV

The module connection takes no more than 5 minutes, but requires care. Follow the instructions to avoid damage to the connectors or module:

1. Turn off the TV socket. This will prevent short circuits when you connect.
2. Find a slot on the back of the TV CI/CAM (usually located near HDMI-It's covered with a plastic cap -- take it off carefully.
3. Put it in. CAM-the module into the slot to the end. Make sure that the contacts of the module match the connector (do not confuse the top / bottom!).
4. If the module requires an operator card (e.g. Tricolor), insert it into the corresponding slot on the module.
5. Connect the TV to the network and turn it on.

Once turned on, the TV should automatically identify the module and prompt to update its firmware (if required). If this does not happen, go to the settings manually:

1. Open the TV menu by pressing the Settings button on the remote.
2. Go to the Settings section → Channels → Setting up CAM (The path may differ depending on the model).
3. Select the option Update CAM Or initialize the module.

Check the compatibility of the module with the Xiaomi model TV|Turn off the TV from the network|Remove the plug from the slot CI|Insert module before clicking|Connect the operator card (if required)-->

Setting up CAM-module through the Xiaomi menu TV

Once you physically connect the module, you have to configure it software-based, and the algorithm depends on the firmware version of the TV, but the overall scheme is this:

1. Go to Settings. → Channels → Setting up CAM (On some models, the path may be set → System system → Additionally. → CAM).

2. In the menu that opens, select the option Control Module. The TV should display information about the connected module (name, firmware version, status).

3. If the module is not determined, click Module Search or Reboot CAM.

For modules with an operator card (for example, Tricolor) you will need additional configuration:

• 📺 Activate the card: select the option to activate the card and follow the instructions on the screen. PIN-code (default 0000 or 1234).
• 🔄 Update of access rights: in the menu CAM Select Update Rights (this synchronizes data with the operator).
• 📡 Channel search: After activating the map, start automatic channel search (Settings) → Channels → Search engine).

If the channels remain encrypted after setting up (Scrambled Channel message is shown), check:

• Correct installation of the card in the module (chip up!).
• Is the subscription active with the operator (the card may have expired).
• Compatible with your operator (update the module via the TV menu).

💡

If the TV can't see CAM-So, try to take it out and put it back in when the TV is on, and sometimes that helps initialize the connection.

Firmware update CAM-module and TV

Outdated firmware is one of the main causes of inoperability CAM-Updates are available for both the module and the Xiaomi TV.

Firmware update CAM-module

Most modules support updating via the TV menu:

1. Go to Settings. → Channels → Setting up CAM → Update the module software.
2. Confirm the update. It'll take 2-5 minutes.
3. After you have finished, restart the TV.

If the automatic update doesn’t work, download the firmware from the module manufacturer’s website (such as Neotion or SmartiX) and download it through the app. USB-accumulator:

1. Download the firmware file (usually with the.bin or.upg extension).
2. Copy it into the root drive catalog (format) FAT32).
3. Connect the flash drive to the TV and select Update with USB menu CAM.

Update of the firmware of the Xiaomi TV

Outdated TV firmware can block work CAM-To update the software:

1. Go to Settings → About TV → System Update.
2. Select Check Updates and wait for the process to complete.
3. If the update is not found, download it manually from the Xiaomi website and install it through the USB.

Critical information: For modules CI+ 2.0 requires TV firmware at least 3.0.123 (for 2023 models). → On TV.

💡

If after the firmware update CAM-module stopped working, reset the settings of the TV (Settings) → System system → Resetting. This often solves compatibility issues.

Troubleshooting: CAM-module is not working

If, after setting up, CAM-The module is not functioning, use this diagnostic manual:

⚠️ WARNING: If the TV makes a mistake CA Module, this could mean physical damage to the slot CI Don't try to force the module, call the service center.

Typical errors and their solutions

If none of the methods did not help, perform a complete reset of the TV to the factory settings:

1. Go to Settings → System → Reset.
2. Select Reset all settings (you will need to enter) PIN-default code 0000).
3. After restarting, repeat the settings. CAM-zero-module.

⚠️ Attention: On Xiaomi Mi models TV Q1E and Q1F slot CI It can be blocked after updating the firmware, in which case you need to roll back to the previous version of the software through the service menu (instructions are available on the forums). 4PDA).

Additional settings: parental controls and restrictions

CAM-The modules support parental controls that restrict access to certain channels or age-related content to adjust the restrictions:

1. Go to Settings. → Channels → Setting up CAM → Parental control.
2. Install. PIN-The default code is often 0000 or 1234.
3. Select the channels or categories of content you want to block.
4. Save the settings and check the limitations.

On some modules (e.g. Neotion) CI+) Additional options available:

• 🔒 Time-blocking: Restricting viewing at certain hours.
• 📊 Viewing Log: Displaying the History of Viewed Channels.
• 🔄 Auto-update rights: automatic synchronization with the operator (it is recommended to include the).

If you forgot. PIN-Parental control code, you can reset it only through a complete resetting of settings CAM-module (in the Settings menu) CAM → Note that this will also remove all saved channels and settings.

💡

For discharge PIN-Keep the reset button on the module itself (if any) for 10 seconds.

FAQ: Frequent questions about setting up CAM-module on Xiaomi TV