How to set up TV viewing on Xiaomi TV: all the ways

Xiaomi Mi TVs TV — These are not just screens to connect to a computer or a set-top box, but full-fledged multimedia centers that support all modern broadcast formats, but many users have difficulty in trying to set up regular TV viewing: If you don't find channels, if you don't hear sound, if you don't see the image, it crumbles. In this article, we're going to look at all the ways you can connect and configure your TV with Xiaomi Mi. TV — from the classical antenna to IP-TV via Internet.

It's important to understand that the functionality depends on the model of the TV. TV 4S mi TV P1 They have built-in tuners for on-air and cable TV, but Mi TV Q2 Some regions are provided without DVB-T2. Support for satellite broadcasting is also different: not all models are equipped with satellite broadcasting. DVB-S2 We'll take these nuances into account and give you recommendations for each situation.

1. Checking the configuration and technical capabilities of the TV

Before you connect an antenna or configure channels, make sure your Xiaomi Mi is a good choice. TV It actually supports the right kind of broadcast:

📡 On-air TV (DVB-T2): All models support, except for some modifications for the Chinese market. RF IN (antenna input) at the rear.
📺 Cable TV (DVB-C): It requires a separate module or an external receiver, and only Mi models have built-in support. TV 5 Pro and newer.
🛰️ Satellite TV (DVB-S2): built-in only in Mi TV Master and Mi TV Q1E. For other models, an external receiver is needed.
🌐 IP-TV: works on all TVs through apps (e.g. Wink, MTS TV or Megogogo).

To know the possibilities of your model:

Go to Settings. → On TV.
Remember the full name of the model (e.g., Mi). TV 4A 43").
Check the specifications on Xiaomi’s official website or in the documentation.

📊 What type of television do you plan to use?

Etheric (DVB-T2)

Cable (DVB-C)

Satellite (DVB-S2)

IP-TV via Internet

I don't know.

⚠️ Note: If your TV is purchased in China (models with a prefix) CN in title, it may not support European broadcasting standards DVB-T2 or DVB-C. In this case, an external receiver will be required.

2. Connection of terrestrial television (DVB-T2)

Digital TV is the easiest way to access 20+ It's free channels, no subscription fees, and it only requires a TV with support. DVB-T2 room-and-outdoor antenna.

Instructions for connection:

Connect the antenna to the connector. RF IN TV-wise

Make sure the antenna is directed towards the nearest tower (check on the RTRS website)

Turn on the TV and go to Settings → Channels → Channel setting → On-air TV

Select the Digital Channels mode (DVB-T2) and run an automatic search.

-->

If the TV doesn't find the channels:

🔍 Check signal quality: the channel settings menu should display the signal level (at least 60%).
📶 Try moving the antenna closer to the window or using a signal amplifier.
🔄 Update the TV software: Settings → On TV. → Updating the system.

On some models (e.g., Mi) TV 4X) After searching, channels can be displayed without logos. That's OK -- just assign each channel a name manually through Edit channels.

What to do if the TV finds channels but they don’t show

This is usually due to improper settings. LCN (Logical channel numbers. Go to Settings → Channels → Additionally, and disable the Auto Numbering option (LCN). Then, do a second search.

3. Set up cable television (DVB-C)

Cable TV from providers (for example, Rostelecom, MTS, Beeline) requires special settings that depend on the region.

📊 Frequency (e.g. 298,000 kHz)
🔢 Symbolic speed (e.g, 6875 ks/s)
🔑 Modulation (usually 256) QAM)

Your provider must provide this data, and if you don't have it, check the contract or call for support.

Instructions for setting:

Connect the provider cable to the connector RF IN.
Go to Settings → Channels → Channel Configuration → Cable TV (DVB-C).
Select Manual Search and enter the options from the provider.
Run a channel search if the TV asks. PIN-try the standard combinations: 0000, 1234 or 6321.

Provider	Typical settings DVB-C	Notes
rostelecom	Frequency: 298000 kHzspeed: 6875 ks/sModulation: 256 QAM	In some regions, the frequency of 306,000 kHz is used.
MTS	Frequency: 314000 kHzspeed: 6952 ks/sModulation: 256 QAM	Requires activation of the service through the personal account
Beeline	Frequency: 290000 kHzspeed: 6875 ks/sModulation: 256 QAM	Supports CI+ pay-channel modules

⚠️ If your TV is not supported DVB-C, but there's a connector RF IN, You can use an external receiver (for example, Xiaomi Mi Box S) with a connection via the HDMI. In this case, the setting is conducted through the console menu, and the TV works as a monitor.

Connection of satellite television (DVB-S2)

Satellite TV (for example, Tricolor, NTV-Plus) on Xiaomi TVs is possible only if the model is equipped with a built-in tuner. DVB-S2. For now, it's:

📺 Mi TV Master Series (all modifications)
📺 Mi TV Q1E (Only for the European market)

Other models will require an external receiver (e.g., a, GS U510 or GI S8120), plug-in HDMI.

If your TV is supported DVB-S2, follow the instructions:

Connect the cable from the satellite antenna to the LNB IN connector.
Go to Settings → Channels → Channels → Satellite TV.
Select a satellite (e.g. Eutelsat 36E for Tricolor or Yamal 402 for NTV Plus).
Enter the transponder parameters (they can be found on the provider's website).
Run a channel search if you want. PIN-code, use data from the contract.

Example of parameters for Tricolor:

Satellite: Eutelsat 36E (36.0°E)


Frequency: 12226 MHz




Polarization: L (L)




Symbol speed: 27500 ks/s




FEC: 3/4

💡

If the TV can't find satellite channels, check the cable for damage and make sure the antenna is properly tuned to the satellite.

5. Viewing. IP-TV via Internet

If you don’t want to mess with antennas and cables, IP-TV is a great alternative. All Xiaomi Android TVs TV Supports the installation of apps for watching TV over the Internet:

🌍 Wink (Rostelecom)
📡 MTS TV.
🎬 Megogo (movies) + TV)
📺 Amediateka (premium channels)
🛡️ PeerTV (free channels)

How to install and configure:

Open the Google Play Store on your TV.
Find the right app (like Wink) and install it.
Open the application and log in (if required).
Select a channel pack and start watching.

If the application does not start or brake:

🔄 Reboot the TV: Settings → On TV. → Reboot.
📶 Check the Internet speed (should be at least 15 Mbps for the HD).
🗑️ Clear the app's cache: Settings → Annexes → [Title of the annex] → Clear the cache.

💡

For stable viewing IP-TV use a wired Internet connection (via Ethernet). Wi-Fi can cause image stuttering, especially when the signal is weak.

6. Solving common problems

Even after you've set up correctly, you can have difficulties, and here are the most common problems and solutions.

Problem.	Possible cause	Decision
No image, but there's sound.	Incorrect signal format or damaged cable	Check the cable. HDMI/Try another signal source.
Canals are constantly disappearing.	Weak signal or interference	Use a signal amplifier or reconfigure the antenna.
Annexes for IP-TB not installed	Region restrictions or outdated firmware	Update the TV software or change the region in the settings.
No sound on some channels.	Unsupported audio codec	Try changing the sound format in Settings → Sound. → Format of exit.

If the TV does not respond to the connected antenna:

Make sure you select the right signal source (click Source on the remote and select the right source). TV).
Check if the tuner is turned off in the settings: Settings → Channels → Additionally. → Turn on tuner.
Some models of Xiaomi Mi TV after resetting to factory settings, the tuner turns off automatically - do not forget to turn it on again.

7. Alternative ways of watching TV

If the built-in capabilities of the TV are not satisfied, you can use external devices:

📦 Android consoles (e.g. Xiaomi Mi Box S or Nvidia Shield): connect via HDMI Allows you to install any TV application.
💻 Computer or laptop: you can connect to the TV through HDMI and broadcast TV via a browser or programs like Kodi.
📱 Smartphone: Miracast or Google Cast can duplicate the screen of the phone on the TV and watch TV through mobile applications.

For consoles and computers, the same settings are relevant as for a TV, but with greater flexibility. IPTV-Player and download playlist from any provider.

If you are using Kodi:

1. Install Kodi from Google Play.


2. Go to the section "Additions" → "Install from the repository".




3. Select "PVR IPTV Simple Client" and install it.




4. Set up the playlist in M3U format (it can be obtained from the provider).

8. Optimization of image and sound for TV viewing

To make viewing more comfortable, adjust the settings of the TV:

🎨 Image mode: For TV, it is better to choose Standard or Movie (avoid Dynamic - it adds unnecessary artifacts).
🔊 Sound: Turn on Dolby Audio (if supported) and adjust the equalizer to your voice (increase the average frequencies).
🕒 Sleep timer: if you fall asleep under TV, set automatic shutdown in Settings → System system → Sleep timer.

For supported models HDR (Like Mi. TV Q2):

Turn it on. HDR In the image settings, but note that not all TV channels are broadcast in this format.
If the image is too dark, turn off Local Dimming (Settings) → Display. → Local blackout).

💡

To watch sports broadcasts, increase the Motion of smoothness in the image settings - this will reduce the "blurring" of fast scenes.

FAQ: Frequent questions

My Xiaomi Mi. TV I can't find channels after I search?

First check: Is the antenna connected to the connector RF IN (don't confuse HDMI!). Whether the correct signal source is selected (click Source on the remote and select the TV). Is the signal level sufficient (the channel settings menu should have an indicator of at least 60%). If everything is correct, but the channels are not located, try a manual search with parameters for your region (you can check them on the RTRS website).

Can I record transfers to Xiaomi Mi? TV?

There is no built-in recording function, but there are workarounds: Connect an external hard drive through USB and use applications like Tivimate (requires manual setup) and use a record-enabled set-top box (e.g. Dune). HD or MAG-Set up the broadcast to the computer via the series. VLC Please note that channel recording may violate the terms of the provider's license agreements.

How to reset the settings of the channels to the factory?

To completely remove all saved channels and start setting up again: Go to Settings → Channels → Select Reset channel settings. Confirm action (may be required) PIN-Once reset, the TV will automatically prompt you to perform a new channel search.

Why are there no sound on some channels?

This problem is usually related to: Unsupported audio codec: try changing the sound format to Settings → Sound. → Format of exit PCM. Channel settings: some broadcasters transmit audio on the second track. Press the Audio button on the remote and select another track.

Can I watch TV from my phone on Xiaomi Mi? TV?

Yeah, there are a few ways: Miracast/Wi-Fi Direct: Enable this feature on your TV (Settings) → Connections → Miracast) and duplicate the screen from your phone. Google Cast: if the TV supports Chromecast, you can stream videos from apps (for example, YouTube or Megogo). ISP applications: some operators (for example, MTS TV) allow you to log in to the TV and phone at the same time. For minimal delays, use a wired connection of the phone to the router (via USB-Ethernet adapter).