The problem with incorrect screen time is one of the most frequent and annoying bugs faced by owners of Xiaomi Mi TV and Redmi TV. Often after turning off the socket or rebooting, the device resets the watch to a standard value, for example, in 2011 or 1970. It is not just a visual defect that prevents you from enjoying movies.
Incorrect time data can block many applications that require an up-to-date security certificate check date, and can also disrupt log and broadcast schedule displays. In this article, we’ll look at why TV time is being reset and provide working solutions, from basic settings to manually entering through an engineering menu.
Understanding how an Android TV or PatchWall operating system functions in a synchronization context will help you avoid similar situations in the future. We will look at both software customization methods and nuances related to the hardware of the device.
⚠️ Warning: If your TV is constantly resetting time after being completely de-energized (pulled out of the socket), this may indicate that the internal battery is discharged. CMOS or software firmware failure requiring resetting of settings.
Automatic synchronization through the network
The easiest and most reliable way to set time on a Xiaomi TV is to use automatic synchronization over an Internet connection. Smart TVs use the NTP (Network Time Protocol) protocol, which allows the device to receive accurate data from remote servers.
To get started, make sure your TV is connected to Wi-Fi or wired Ethernet. Without an active Internet connection, you can't automatically adjust, because the device has nowhere to get the actual data. Go to the main menu and find the settings section.
Depending on the firmware version and region, the path to settings may vary slightly, but the logic remains the same for all Xiaomi and Redmi models.
Usually, the path is as follows: go to Settings → Device → Date and time. Here you will see the option "Automatically" or "Use network time." Activate it. If the network is stable, the clock should update within a few seconds.
- 🌐 Make sure that the router settings do not have a lock. NTP-requests for devices on the local network.
- 🔄 After syncing is enabled, it may be necessary to restart the TV to apply the changes.
- 📡 Weak Wi-Fi signal can prevent successful connection to time server.
In some cases, the automatic setup may not work immediately because of the old DNS data caching. If the switch is active but time is not changing, try turning it off, wait 10 seconds and turn it on again, which will cause the system to re-initiate the request to the server.
Manual date and time setting
If the automatic mode is not working or you want to set the exact time manually, the system provides this option. This is especially true if the router is not connected to the Internet or there are restrictions on your network. Manual setting allows you to set any parameters regardless of external sources.
To go manual, you need to turn off the automatic sync option. Once you do, the date and time fields will be active. Use the remote control to navigate the numbers.
☑️ Checklist manual adjustment
Note the time format. Some regions may have a default 12-hour format (AM/PM), which is often confusing, and you can switch to a 24-hour format from the same menu by selecting the appropriate time format option.
It's also critical to choose the right time zone, and if you choose the wrong region, even if you synchronize it correctly, you can find a few hours of time, and you can find your city or your nearest major city on the list.
| Parameter | Description | Recommendation |
|---|---|---|
| Year | Current calendar year | Check each discharge |
| Time zone | Regional shift of UTC | Choose the nearest metropolis |
| Format | 12h or 24h | 24 hours to avoid confusion |
| Synchronization | Time-gaining regime | Auto (if networked) |
After setting all the settings, remember to click on the Save or OK button if it is displayed on the screen. In the PatchWall interface, changes can be applied instantly, but for reliability, it is better to exit the settings menu and go back to check if the data is saved.
Setting up the time zone and region
A common reason why time on Xiaomi TV shows incorrectly is the wrong region-based anchorage. - Android Operating System TV can determine the location of the IP-The address is not always accurate, especially if the provider uses dynamic IP rustic.
To work correctly, all services, including displaying time in weather widgets and TV schedules, you must manually specify the correct region. This is done in the Settings → Device → Settings → Region.
Changing the region may affect the list of available apps in the Google Play store and PatchWall content platform, but for basic TV functionality and the correct clock running, this is a necessary procedure.
The region’s impact on content
If you live in a border area or use a VPN, the system may misidentify your location, and in such cases, manual time zone setting is the only right solution.
- 🌍 Relocation requires restarting the device to fully implement the changes.
- ⏰ The time difference can range from 30 minutes to several hours depending on the zone.
- 📺 Some digital TV channels may not work in the wrong region.
It is worth noting that some Redmi TVs are strictly region-specific, and the attempt to change the region on such devices can be limited software, in which case the focus should be shifted to the time zone setting, without changing the overall region of the device.
The problem of resetting time after switching off
One of the most common complaints users have is that the TV resets time to default (often 1970 or 2011) after disconnecting from the power grid, a behavior that indicates that the device does not save date settings in nonvolatile memory or has no power for internal real-time clocks.
Smart TVs today don't usually have a built-in clock battery like computers do. They rely on getting time off the network every time they turn on. If the Internet hasn't been connected yet when the system starts and the application requires a precise time, there may be an error or reset.
To minimize this problem, try not to turn off the TV completely with a button on the case or remote (deep sleep mode), but to use standby mode when the indicator is lit red.
⚠️ Attention: A constant time reset can be a sign of a power supply or motherboard malfunction if the problem manifests itself even with a stable Internet connection at the time of switching on.
Also worth checking is the power saving settings. The Settings → Energy Saving menu may have features that completely shut down the Wi-Fi module when it is off. Disabling such options can help keep settings faster after turning on.
If the problem persists, you may need to reset to factory settings, a radical method that will remove all your apps and accounts, but often eliminates software bugs that prevent you from maintaining your system configuration.
Using NTP servers for accurate synchronization
For advanced users who want to be sure of the accuracy of the time, there is the possibility of prescribing specific NTP-Standard servers used by default in Xiaomi firmware may be overloaded or unavailable in your region.
You can change the time server via an engineering menu or by using ADB (Android Debug Bridge) by connecting the TV to your computer, which allows you to specify the address of a reliable server, such as pool.ntp.org or Google time.google.com servers.
adb shell settings put global ntp_server pool.ntp.orgThis command is input through the ADB console when the TV is connected to the PC via USB or through network debugging, and after the command is executed, you need to restart the device, which is an action that will force the system to use the specified time source.
💡
Use public NTP-Low-ping (latency) servers for your country – this will provide a minimum error in milliseconds.
The Advantage of a Manual Job NTP-Even if standard services like Google or Xiaomi are in trouble, your TV will continue to get accurate time from an alternative source.
However, be careful: entering the wrong server address can cause the sync to stop working at all, in which case, return the settings to the factory values or delete the registered address through the same console.
Diagnostics and additional solutions
If none of the above methods worked, and Xiaomi’s TV time continues to run away or reset, a deeper diagnosis may be needed.
Check to see if you have any third-party time management apps or widgets that may conflict with system settings, and sometimes installing such software from unknown sources disrupts the standard date and time module.
Also worth paying attention to is the firmware version. Manufacturers regularly release bug fixing updates. Go to Settings → About TV → System Update and check for new versions of the software.
- 📉 Removing newly installed apps could resolve settings conflict.
- 🔄 Resetting network settings (Wi-Fi passwords, etc.) sometimes helps to establish a connection with the time server.
- 🛠 Complete flashing of the device is required in extreme cases of software failures.
In rare cases, the problem may be related to a particular router: Try handing out the Internet from a mobile phone (Wi-Fi distribution) and connecting the TV to it. If the time is set automatically, then the problem is in the settings of your home router (for example, port locking or DNS).
💡
If the time is reset only when completely off-grid, but is stored during standby mode - this is the normal behavior for models without an internal battery, depending on the speed of loading the Wi-Fi module.