How to change the time on the lock screen Xiaomi Redmi: all the ways and nuances

Why is the time on the lock screen Xiaomi Redmi may not be displayed correctly?

Xiaomi Redmi's lock screen is not just a protection against random clicks, but also a source of important information. The time is displayed in large print here so you can see it at first glance. However, many users are faced with the fact that the watch begins to "lie": rush, lag or even show the wrong time zone. The reasons can be different from a failure of sync with the network to manual settings that you accidentally changed.

In this article, we’ll look at all the ways you can change your lock screen time, including manually configuring, network synchronization, and solving typical problems. The instructions are valid for all Redmi models (from Redmi Note 10 to Redmi 12) and MIUI 12/13/14. If your device runs on an older firmware, some menu items may be slightly different — but the overall logic remains the same.

Before you go into settings, make sure the problem is not due to a hardware failure. For example, if the phone runs zero or overheats, it could affect the internal timer, in which case you may need to reset your time settings or even flash it.

Method 1: Manually adjusting time and date

The most obvious method is to manually set the right time, and this is true if the automatic synchronization is disabled or is not working correctly.

1. Open Settings (the gear icon on the main screen).
2. Scroll down and select Additional settings.
3. Slip on the date and time item.
4. Turn off the date and time autodetection slider (if it is active).
5. Click Set time and enter current values.
6. Similarly, set a date and select a time zone.

After saving the changes, check the lock screen – the time should be updated immediately. If this does not happen, try restarting the phone or forcefully updating the watch widget (you just need to unlock and lock the screen again).

⚠️ Warning: If time continues to go wrong after manual settings, this may indicate a battery failure (especially for older Redmi models). 4X/5A). In this case, a diagnosis is required in the service center.

Is Airplane Mode off?

Is there access to a mobile network or Wi-Fi?

Is the phone at least 20% charged?

Have you tried restarting the device?-->

Method 2: Synchronizing time over the network

By default, Xiaomi Redmi uses automatic time synchronization over the operator's network or the Internet. If this mechanism fails, the clock on the lock screen may show incorrect data.

1. Go to Settings → Additional settings → Date and time.
2. Activate the sliders: 🔄 Autodetermining date and time 🌍 Time zone autodetermination

NTP

If the synchronization does not work:

• 📶 Check your internet connection (mobile or Wi-Fi).
• 🔄 Switch between modes 3G/4G/5G customized SIM-map.
• 📱 Make sure that there are no traffic blocking apps installed on your phone (like NetGuard or AdGuard).

On some Redmi models (such as the Redmi Note 8 Pro) after upgrading to MIUI 14, the automatic synchronization option may disappear, in which case resetting network settings or rolling back firmware will help.

💡

If the time on the lock screen differs from the time in the status bar, try to disable and re-enable the option "Show the owner on the lock screen" in the lock screen settings → Additional.

Method 3: Change the format of the display of time

Sometimes the problem isn't with the watch itself, but with the display format, like you're used to seeing 24:00 and the phone is showing 12:00 AM/PM. Or vice versa.

1. Go to Settings → Additional settings → Date and time.
2. Click on the time format.
3. Choose your preferred option: ⏰ 24-hour format (e.g. 15:30) ⏰ 12-hour format (e.g. 3:30) PM)

You can also set up in this menu:

• 📅 Date format (day/month/year or month/day/year).
• 🌐 Display language (if you have bilingual firmware).

If the lock screen time hasn't updated after the format change, try changing the theme.

1. Click the empty space on the main screen.
2. Select Themes.
3. Apply any other topic, then go back to the standard one.

Method 4: Resetting time and date settings

If none of the previous methods worked, there may have been a software failure in the time management module, in which case the resetting of the settings will help:

1. Open Settings → Applications → Application Management.
2. Slip on the three points in the upper right corner and select Show System Processes.
3. Find the time settings (or Clock) list.
4. Press Warehouse. → Clear the data.

After that, the phone will go back to factory time settings, and you'll have to reset the time zone. If that didn't work, try resetting the network completely:

1. Go to Settings → About the phone → Reset settings.
2. Select Network Resetting.
3. Confirm the action.

⚠️ Note: Resetting your network settings will delete all stored Wi-Fi passwords and mobile internet settings. Write them down in advance or back them up via Settings → Additionally. → Backup and reset.

Solving problems with displaying time on the lock screen

Sometimes the clock on the lock screen doesn't update or shows old data, even if the system has the right time, and this is due to the widget caching.

• 🔄 Forced Update: Unlock the phone, then lock it again (click the power button).
• 📱 Reboot: Hold the power button and select Reboot.
• 🎨 Change theme: As mentioned earlier, changing the visual theme can reset the widget cache.
• 🔧 Cleaning the Launcher cache: Go to Settings → Annexes → App management. Find the Launcher (or MIUI Launcher.Push Clear cache.

If the lock screen does not display the time fully (for example, no seconds or date), check the widget settings:

1. Click the empty space on the lock screen.
2. Select the widget settings (or Change).
3. Make sure that the options to Show seconds and Show date are enabled.

💡

If after all the manipulations, the time on the lock screen is still incorrect, and the system is displayed correctly, the problem is in the MIUI graphic layer. Solution: update the firmware to the latest version or roll back to a stable build.

Additional tips for owners of Xiaomi Redmi

To avoid problems with time in the future, follow these guidelines:

• 🔋 Watch your battery: If the phone runs down to 0%, it can knock down your internal clock.Try to keep it from completely draining.
• 🌍 Update your time zone when moving: If you are traveling, turn on the time zone autodetection option or manually set it.
• 📲 Check the updates. MIUI: Newer versions of firmware often fix time synchronization bugs. Update through Settings → The phone. → Updating the system.
• 🛡️ Use the original firmware: Custom ROM (LineageOS may conflict with system time services.

For Redmi models with AMOLED-screens (e.g. Redmi) K50 Or the Redmi Note 12 Pro.+) There is an additional setting – Always-On Display (AOD). In this mode, the time is displayed even on the screen that is turned off, to adjust it:

1. Go to Settings → Lock screen.
2. Choose Always-On Display.
3. Activate the slider and adjust the display style of the time.

Note that AOD consumes an extra battery (approximately 1 to 3 percent per hour), and if you want autonomy, you should turn it off.

Extreme measures: resetting the phone to factory settings

If none of these methods worked, and the lock screen time is still incorrect, the last option is a complete phone reset, which will delete all the data, so back up first:

1. Save important files to your computer or to the cloud (Mi Cloud, Google Drive).
2. Write down passwords from accounts and Wi-Fi.
3. Go to Settings → About the phone → Reset settings.
4. Select Reset all settings and confirm the action.

Once reset, the phone will reboot, and you'll have to reconfigure it, including the date and time, and 90 percent of the time, this solves the problem of the clock being misrepresented on the lock screen.

⚠️ Note: Some Redmi models (e.g. Redmi) 6/6A) After the reset, you may need to re-assign your Mi Account. Make sure you remember your login and password!

FAQ: Frequent questions about time on the lock screen Xiaomi Redmi