How to change the status bar on Xiaomi Redmi Note 9: from standard settings to deep customization

Why Users Want to Change Status Bar and What It Does

The status bar on the Xiaomi Redmi Note 9 is the top panel of the screen, which displays time, battery level, network signal, notifications and system icons. For many users, it becomes an annoying element: too bright colors, unnecessary inscriptions (for example, the operator name) or chaotic arrangement of icons. Some want to simplify the interface, some to add personality, and some seek to increase the usable area of the screen by hiding unnecessary elements.

In this article, we will analyze all available ways to change the status bar - from the basic settings to the MIUI Advanced methods with the use of ADB And it's important to understand that the depth of change depends on the version. MIUI and the availability of superuser rights (ROOT). For example, on the Redmi Note 9 with MIUI 12.5 and later, some of the features may be limited to Xiaomi's security policy. ROOT There are options!

If you’ve never customized Android, don’t worry: the first three methods are good for beginners, and for experienced users, we’ve prepared instructions for working with ADB, Magisk modules, and editing system files. Warn in advance that some actions may result in resetting or loss of warranty, so read the warnings carefully in each section.

Method 1: Standard MIUI settings (without ROOT and additional programs)

So, to start with, the basic thing is, the built-in MIUI, which is limited, but it can actually help you to adjust for the most annoying things.

• 🔄 Hiding the operator name: disables the inscription "MTS", "Beeline", etc. in the status bar.
• 📱 Customization of displayed icons: you can remove icons NFC, Bluetooth or "Do Not Disturb" mode".
• ⚡ Color scheme: the choice between dark and light mode (affects the status bar).
• 🕒 Time format: 12- or 24-hour, and display seconds.

How to do this:

1. Open the Settings → Screen → Status Line.
2. In the section Show the operator name, switch the slider to the off position..
3. In System Icons, uncheck the boxes from unnecessary items (for example, Flight Mode or Geolocation).
4. To change the color scheme, go to Settings → Screen → Dark theme.

⚠️ Attention: On some firmware MIUI The status line may not be available, in which case try to update the system or use alternative methods from the following sections.

Method 2: Using MIUI themes to change the design of the state string

Official and custom themes in MIUI can dramatically change the appearance of the status bar, from fonts to colors to transparency, and this does not require ROOT, but has limitations:

• 🎨 Background color: You can make a line semi-transparent or completely black/white.
• 🔤 Fonts of icons: Some themes offer alternative icons for battery, network and notifications.
• 🖼️ Notification Styles: Changing the Form and Animation of Pop-up Alerts.

Instructions for the application of topics:

1. Launch the Themes app (icon with brush).
2. In the Popular or For MIUI 12/13 section, find a topic marked Changes the Status bar (e.g., "Pure Black" or "Minimal UI").
3. Click Apply and confirm the changes.
4. If the theme is paid, check its rating and reviews - some custom themes may contain bugs.

Where to look for quality topics:

• 🌍 Official theme store MIUI (annexed Topics).
• 📱 Telegram channels, like, @MIUIThemes or @XiaomiThemes.
• 💾 Forums XDA Developers (Section Xiaomi Redmi Note 9).

💡

Before using the theme, back up your current settings in Settings → Additional → Backup. Some themes may reset wallpaper or notification sounds.

Method 3: Applications for customization without ROOT (Nacho Notch, Status)

If MIUI's built-in capabilities aren't enough, you can use third-party apps, which don't require super-user rights, but they have their own nuances:

Example of Nacho Notch setup:

1. Install the app from Google Play.
2. Launch and grant permission to Overlay over other applications.
3. In the Status Bar section, select the background color (e.g. #000000 for black).
4. Activate Hide Notch if you want to hide the screen cutout.
5. Restart the device to apply the changes.

⚠️ Note: Applications like Status require execution ADB-Incorrect commands can cause you to reset all settings or even lock your device. If you're not sure, use only the basics.

Enable USB debugging in Settings → About Phone → MIUI version (click 7 times)

Install ADB drivers on PC

Download platform-tools from the Android Developers website

Connect your phone to your PC and confirm your trusted device

-->

Method 4: ADB-commands for deep tuning (without ROOT, PC-only)

If you're ready to connect the Redmi Note 9 to your computer, ADB can change the status bar settings that are not available through standard settings, a method that works on most versions of MIUI, but requires care.

What can be done through ADB:

• 🔧 Hide any system icons (including battery, clock, or network signal).
• 🎨 Change the color and transparency of the status line.
• 📏 Set up indentations and panel height.
• ⏱️ Add seconds to hours or change the format of time.

Step-by-step:

1. Install the platform-tools on PC (you can download here).
2. Turn on USB Debugging on your phone (Settings → About Phone → MIUI version – press 7 times, then go back to Additional → For Developers).
3. Connect the Redmi Note 9 to your PC and type in the command line: Adb devices Make sure the device is identified.
4. To hide the battery icon, follow: adb shell settings put global icon_blacklist battery
5. To get it all back: adb shell settings put global icon_blacklist""

Other helpful teams:

# Hide the icon of the network


adb shell settings put global icon_blacklist signal




Change the color of the status string (format RRGGBB)



adb shell settings put global status_bar_color #FF000000




Show seconds in hours



adb shell settings put global status_bar_clock 1

Method 5: Magisk Castom Firmware and Modules (for power users only)

If you're willing to take drastic measures, installing custom firmware (like LineageOS or Pixel Experience) or Magisk modules will open up unlimited customization options, but there are serious risks:

• 🔓 Requires unlocking the bootloader (will lead to a data reset).
• 🛠️ Necessary. ROOT-access (deprives guarantees).
• ⚠️ Firmware errors can make your phone inoperable (brick").

Popular Magisk modules for the status bar:

Short instructions for installation of the module:

1. Unlock the bootloader through Mi Unlock Tool (the official Xiaomi utility).
2. Install Magisk and Custom Recovery (TWRP)
3. Download the module (e.g. StatusBar Customizer) in.zip format.
4. Reboot to TWRP and run the module through Install.
5. Restart the device and set up the status bar in the module application.

⚠️ Note: Redmi Note 9 with Mediatek Helio processor G85 Unlocking the bootloader can lead to problems with Widevine L1 (lack of HD Netflix, Disney.+ Before you run the firmware, check if this feature is critical to you.

💡

Custom firmware gives you maximum freedom, but requires technical skills. If you are a beginner, start with methods 1-3 or contact the XDA or 4PDA forums for help.

Frequent problems and their solutions

When you change the status bar, Redmi Note 9 users often encounter errors, and here are the most common ones and ways to fix them:

• 🔄 Icons don't hide after ADB-Check if the icons list is correctly entered in icon_blacklist. For example, to hide the network signal and Wi-Fi, the command should look like this: adb shell settings put global. icon_blacklist"Signal, Wifi" Pay attention to quotation marks and commas!
• 🎨 The color of the line does not change: MIUI 13+ Some parameters are blocked by the system. MIUI Status Bar Tweaks or Customization Theme.
• ⚡ After restarting, settings are reset: This is a typical problem for methods without ROOT. The solution is to repeat commands after each phone turn on or install an automatic script via Tasker.
• 🛑 Phone stopped turning on after firmware: If the screen doesn't respond, try going to Fastboot (clip Power) + Volume down) and flash the original firmware through the Mi Flash Tool.

If none of the methods worked, check:

• 📋 Version MIUI: Some features are only available on new builds.
• 🔒 Availability of locks from the operator (on branded phones).
• 🛠️ Conflicts with other applications (e.g. Second Space or Dual Apps).

FAQ: Answers to popular questions