How to add a map to Xiaomi Redmi Note 7: the full guide

Adding cards to the Xiaomi Redmi Note 7 is a basic but critical operation for any owner. Not only does access to mobile communication depend on the correctness of the actions, but also the ability to expand the internal memory of the device. Many users are afraid of damaging the thin tray mechanism or improperly orienting the chip, which can lead to improper operation of the gadget.

Modern smartphones require care, as the card tray in the Redmi Note 7 is designed in a hybrid slot format. This means that the space inside the case is distributed so that you can fit two. SIM-A card or a SIM and a microSD card, but not all three at the same time, and understanding this feature will help avoid confusion and mechanical damage during installation.

In this guide, we will discuss each step in detail: from finding a special key to configuring the network in the operating system. MIUI. You will learn how to safely remove the tray, which side to stack the chips and what to do if the phone does not see a new one. SIM-Following the instructions will allow you to quickly connect the device to the operator’s network or increase the storage capacity for photos and applications.

Tool preparation and completeness check

Before you start physically installing the cards, make sure you have all the tools you need. The standard Xiaomi Redmi Note 7 includes a special metal key to remove the tray, but it is often lost or thrown away with the box. If there is no original fixture, you can use a thin paper clip, straight line, or a special needle from the sewing kit.

It is strongly advised not to use sharp objects such as pins with thick heads, knives or toothpicks for this procedure, as they can damage the latch mechanism or scratch the body. It is important that the tool is thin enough to enter the micro hole next to the tray, but strong enough to withstand pressure when extracted.

You should also prepare the maps. Make sure yours is yours. SIM-The card is Nano-SIM, because that's the size that the device supports, and if your SIM is larger, you need to gently break the desired segment along the circuit or contact the carrier's cabin to replace it. MicroSD card is also better to check in advance on another device to rule out the possibility of a marriage.

⚠️ Warning: Before any tray manipulations are initiated, we strongly advise you to turn off your smartphone completely. Although Hot-Swap technology allows you to change the cards on the enabled device, the risk of short circuit or software failure of the file system is still present.

Anatomy of the tray and the scheme of card installation

The tray in Redmi Note 7 is located on the lower end of the device, to the right of the USB Type-C charging port. It is a thin metal frame that fits tightly to the body to protect internal components from dust. Inside this tray are two seats that often raise questions for beginners because of their specific shape.

The first place is intended exclusively for SIM-The second card is a combined slot, and you can install either the second slot. SIM-card or microSD card.

You need to navigate the card-laying by the characteristic cut at one of the corners of the chip. The tray itself is usually marked with micro-engraved images of the contour of the card with the correct positioning. The gold contacts of the chip should look down to the inside of the tray, and the cut angle should coincide with the shape of the recess.

Step-by-step instructions for extraction and installation

The process of mounting the map requires calmness and precise movements. Take the smartphone in one hand and the extraction tool in the other. Find a small circular hole on the bottom end next to the retractable tray. Insert the tool's tip perpendicular to the surface and smoothly but confidently press until a characteristic click. The tray should be pushed out a few millimeters, after which it can be removed with your fingers.

Place the extracted tray on a flat surface. Set it up. SIM-The card is placed in the appropriate slot, making sure it is flat and does not protrude beyond the edges. If you use the memory card, place it in the second slot, observing the orientation of the contacts. After installation, gently press the cards with your finger to lock them in the slots if necessary.

Insert the tray back into the smartphone. Notice that it has only one right side of the entrance. Don't try to push it by force; if the tray doesn't come in, flip it over. Smoothly frame until it's fully closed until it equals the body of the device.

💡

So you don't get confused. SIM-cards of different operators, before installing sign the back of the tray with a marker or remember in which slot (near to the edge or far) you put the main SIM.

Network settings and parameters SIM-map

After switching on the smartphone system MIUI automatically detect a new SIM-The map will show a notification of registration on the network, but for comfortable use of two SIM cards or setting up the Internet, you may need to manually adjust the settings. → SIM-Maps and mobile networks to access management of communication modules.

In this section, you can assign which card will be used for mobile internet and which for default voice calls, especially if carrier plans offer different terms for calls and traffic. You can also specify the preferred type of network, for example, forcefully select the network. 4G/LTE higher data transfer speed.

If the Internet does not work automatically, you may need to enter the parameters of the access point. APN. They usually come in the form SMS from the operator, but you can find them on the official website of the provider. SIM-Select the card, go to the "Access Points (APN)» Add a new profile by entering data received from the operator.

Working with a memory card and expanding storage

Using a microSD card in Redmi Note 7 is a great way to get around the limitations of the built-in drive. Once you install the card, the system will suggest formatting it. You can choose formatting as Portable Storage or Internal Storage. The first option makes it easy to transfer the card to other devices, the second one encrypts the data for a particular smartphone.

When you choose the internal storage mode, all the data on the card will be encrypted and only accessible from this phone, which increases data security, but makes the card useless if you lose your smartphone without the ability to unlock it, and Portable Storage is better for storing photos, music and videos.

After setting up, it is recommended to transfer heavy files, such as photos from the gallery or downloaded files from messengers, to the new drive, which will free up space in the system partition, which will positively affect the speed of the interface. In File Manager Explorer, simply select files, click “Move” and specify the path to SD-map.

💡

Using a memory card as internal storage speeds up applications, but ties the card to a particular device forever before resetting settings.

Typical problems and methods of their solution

Sometimes, after you have installed the card, the phone may not see it or display an error message. The first reason is often oxidation of the contacts. SIM-It's also worth checking if the card is sitting tight in the tray and if it's moved when inserted.

If the problem is software, it can help to reboot the device or switch flight mode. Go to the settings and select Flight Mode, turn it on for 10 seconds, and then turn it off. This will force the modem to re-register on the operator's network, which often solves problems with unstable signal.

In rare cases, network settings may be required to be reset. Note that this action will delete stored Wi-Fi passwords and Bluetooth settings, but will not affect your personal files. Go to Settings → Connection and Sharing → Reset Wi-Fi, mobile network and Bluetooth and confirm the operation.

Comparison of map formats and compatibility

To make the right accessories, it’s important to understand the difference in formats and speeds. The table below shows the main characteristics of cards compatible with the Xiaomi Redmi Note 7.

When choosing a memory card, pay attention to the speed class. For recording high-resolution video or installing applications on the map, it is recommended to use models of UHS-I class or higher (Class 10, U3). Slow cards can cause delays when starting programs and jerks when playing video.

Frequently Asked Questions (FAQ)