How to activate Xiaomi TV: from unpacking to first switching on

Buying a new Xiaomi TV is always a joyful event, but the first launch of the device can raise questions even among experienced users. Unlike smartphones, where activation is reduced to entering an account, TVs require more complex setup: From physical connectivity to network configuration and firmware updates, this article will help you understand everything from unpacking the box to getting full access to Smart features. TV.

We will consider activation for all current lines: Mi TV A Pro, Mi TV Q2, Redmi Smart Fire TV And even for the Mi Box S. Special attention will be paid to the typical errors that can block the configuration process, and also reveal the secrets of accelerated activation through the Mi Home mobile application. If you are confronted with a message saying “Device not activated” or the TV asks you to enter a code, here you will find solutions.

Preparing for the first turn on: what to do before activation

Before you connect your TV to the outlet, follow a few mandatory steps that will save you from problems with network connection, updates and even possible overheating of the device.

Start by choosing the right installation site. OLED-screens (e.g., Mi) TV Master) avoid direct sunlight - they can cause pixels to burn out. QLED-TVs (Mi) TV Q1E) critical distance to the wall: in case of poor ventilation, the cooling system will work at its limit, which reduces the service life.

• 📦 Check the package: the box should have a remote (often with batteries), power cable, stand (if not built-in), documentation and sometimes HDMI-For Mi, for Mi. TV P1 and older, there is a voice control panel in the kit.
• 🔌 Prepare the socket: Xiaomi TVs are sensitive to power surges. If your area has an unstable network, use a network filter with surge protection (for example, Xiaomi Mi Power Strip).
• 📶 Organize an Internet connection: activation will require stable Wi-Fi (2.4 GHz or 5 GHz).If the router is far away, think ahead of time about the location or buy an Ethernet extension cord (for models with a port). RJ-45).
• 🔄 Update the firmware in advance: download the latest version of the software for your model from the official Xiaomi website to the flash drive (format) FAT32). This will speed up the activation process.

Pay special attention to the remote control. in new models (Mi). TV A2 2026 and later) it connects via Bluetooth, so press and hold the Menu buttons before you first turn on. + OK for 5 seconds to sync. If the indicator on the remote does not flash, replace the batteries (type) AAA).

Step-by-step: first inclusion and basic setting

Now, to the activation process itself, follow the instructions in strict order, and skipping the steps may cause the settings to fail.

1. Connect the power cable to the TV and the socket. Press the power button on the remote or on the case (located at the bottom on the right side), the Mi logo will appear on the screen.
2. Choose a language. Use a button. ↑/↓ navigational, OK For Russian models, Russian, English and Chinese are available by default.
3. Connect to a Wi-Fi network. Select your network from the list, enter your password. If the TV doesn't see Wi-Fi, check if the router's 2.4GHz mode is on (5GHz may not be supported on older models).
4. Accept the terms of use. Here it is important to read the item on data collection — Xiaomi defaults to send anonymous statistics. To disable, go to Settings. → Confidentiality after activation.
5. Sign in to your Mi Account. If you don't have one, create it through the Mi Account mobile app (so quick). Without an account, you won't be able to use Mi Home, Google Play, and some streaming services.

When you log in, you'll want to update your firmware. Never refuse to upgrade at this point, because the old version of the software may have vulnerabilities that block access to Google Services. It'll take 10 to 30 minutes, depending on the speed of the Internet. If the TV is stuck in Prepare for Update, don't turn it off — wait 15 minutes, then restart with a long press of the power button (10 seconds).

Download the firmware on the flash drive (if there is no Internet)|Connect the TV to the UPS|Close all applications|Do not press buttons during the update-->

Activation through the Mi Home application: a quick way

If the standard setup seems complicated, use the Mi Home mobile app (available for Android and iOS), which speeds up activation by 40% and automatically syncs settings with other Xiaomi devices in your ecosystem.

Here's how it works:

1. Install Mi Home on your smartphone and log in to the same Mi Account as you do on your TV.
2. Turn on the TV and wait until it comes. QR-code on the screen (will appear after the choice of language).
3. In the app, click "Add device» (+ in the upper right corner, select the category "TVs", then your model.
4. Put the smartphone camera on QR-After scanning, follow the instructions on the screen.

Advantages of this method:

• 🔄 Automatic synchronization of Wi-Fi (password is transferred from a smartphone).
• 📱 Simplified control: you can use a smartphone as a remote.
• 🔒 Automatic activation of Google Play and Prime Video.

If QR-The code does not appear, check it out:

• 🔌 Is the TV connected to the Internet (even without a Wi-Fi setting, it must be online via Ethernet).
• 📱 Is the Mi Home app updated to the latest version.
• 🔄 Rebooted router (sometimes) DHCP fails IP-address).

💡

If your TV can’t see your Wi-Fi network, try temporarily disabling the “Hide” function on your router. SSID" and encryption WPA3 (use WPA2-PSK).

Solving activation problems: errors and codes

Even with the right setup, Xiaomi TVs can still produce activation errors, and let’s look at the most common cases and how to fix them.

If the TV hangs on the Mi logo after the update, perform a hard reset:

1. Turn off the TV.
2. Press and hold the Menu button on the remote + power button on the body.
3. Connect the power cable without releasing the buttons for 10 seconds.
4. After the recovery menu appears, select Wipe Data (data reset).

⚠️ Attention: Hard reset removes all installed applications and settings. After the procedure, the TV will return to factory condition, and activation will have to be performed again.

Configuring after activation: what to do first

After successful activation, the TV is ready for use, but for comfortable work, we recommend you to perform several additional settings.

1. Image optimization

Go to Settings. → Display and sound → Image modes. Most scenarios are good for Standard mode, but for the movie, it is better to choose Movie (it turns off post-processing, retaining the original colors). For games, activate Game mode - it reduces the input delay to 10-15 ms.

2. Sound tuning

Settings menu → Sound:

• 🎵 Select Mode Mode Mode Mode Mode for Surround Sound.
• 🔊 Activate Volume Auto-setting to avoid sudden jumps in advertising.
• 🎧 Connect the soundbar or headphones via Bluetooth or HDMI ARC.

Installation of applications

The default TV pre-installed Netflix, Prime Video and YouTube to install additional:

1. Open the Google Play Store (if not, update your firmware).
2. Log in to the same Google account as you do on your smartphone to sync your purchases.
3. For installation APK-File Settings Go to Settings → Security → Unknown sources and allow installation from File Commander or Downloader.

Voice control

In models with a remote Xiaomi Voice Remote (for example, Mi). TV P1E) set up a voice assistant:

• 🎤 Press and hold the microphone button on the remote.
• 🗣️ Say the phrase "Hello, Xiao" AI» (For Chinese firmware) or “OK Google” (for global firmware).
• 🔄 In voice settings (Settings) → Voice assistant: Select the language of recognition.

💡

After activation, be sure to check for updates for pre-installed applications (Netflix, Prime Video). 4K-content.

Activation of Mi Box and other Xiaomi devices

If you don’t have a TV, you have a Mi Box S or a Mi Box. 4K, The activation process is slightly different, and the main difference is that there is no built-in screen, so all the settings are done by connecting to the TV on the TV. HDMI.

The following steps are taken for the Mi Box:

1. Connect the set-top box to the TV through HDMI-cable (use the port) HDMI 2.0 4K).
2. Connect the power cable (use the original adapter on the 5V/2A).
3. On the TV, select the source of the signal (Input/Source) — fitting HDMI-port.
4. Follow the instructions on the screen: language selection, Wi-Fi connection, Google account login (required!).
5. Update the firmware through Settings → About the prefix → Updating the system.

For the Mi Box, activating a Google account is critical, without it, you will not have access to Google Play and most streaming services. If the console gives an error "This device is not certified", do:

Settings → Device → Reset to factory settings

After reset, reset using a different Google account (preferably created no more than 3 months ago).

For Xiaomi devices TV Stick (similar to Chromecast) activation is performed via the Google Home mobile app:

• 📱 Install Google Home on your smartphone.
• 🔌 Connect. TV Stick to the TV and outlet.
• 🔍 In the app, click "Add device" and follow the instructions.

Security and privacy advice

Xiaomi TVs collect usage data, but most tracking features can be turned off. Here's what to do once activated:

1. Turn off statistics collection

Go to Settings. → Confidentiality → Improve the product and deactivate:

• 📊 «Send usage data»
• 📍 «Send location data»
• 🔍 «Personalized recommendations»

2. Set up parental controls

If there are children in the house, activate the restrictions:

• 👶 Settings → Parental control → Turn on
• 🔒 Install. PIN-code (do not use simple combinations like 0000 or 1234).
• 🎬 Limit access to content by age category (e.g. 12)+).

3. Protect the Mi Account

The Mi Account is linked to phone and email, but for added security:

• 🔐 Enable two-factor authentication (Account settings) → Security).
• 📱 Attach a backup phone number.
• 🔄 Check active sessions regularly (Device Management).

⚠️ Note: If you sell or transfer the TV to another user, make sure to log out of your Mi Account and reset your settings. Otherwise, the new owner will not be able to activate the device under their profile.

FAQ: Frequent questions about activation of Xiaomi TVs