Xiaomi and Redmi smartphones offer users many useful features, but sometimes standard system behavior can cause discomfort. One of these features is the flashing of an LED flash during an incoming call, a feature conceived as an indicator of missed events, often turns into an annoyance in reality, especially if the phone is lying down on the table.
The question of where to turn off the flash when calling Xiaomi becomes especially relevant in the evening or in meetings, when sudden bright highlights attract unnecessary attention. Fortunately, the MIUI shell and HyperOS provide flexible tools to manage this setting, although finding them the first time is difficult due to the localization of the menu.
In this article, we will look at all possible solutions to the problem in detail, we will look at not only standard system settings, but also specific parameters for different versions of firmware, and also touch on the topic of third-party applications that can intercept control of indicators.
The main way through system settings
The easiest and most reliable way to remove flashing flashlights is to use the built-in settings menu. However, the path to the desired switch can vary slightly depending on the version of the Android operating system and the MIUI shell. In most modern models, the algorithm of actions is standardized and takes no more than a minute.
First, you need to open the main settings menu of your device, and usually the gear icon is located at the top of the screen or in the Tools folder. Find a section that could be called "Additional Features" or "Advanced Settings." That's where the settings associated with physical indicators and specific system behavior are hidden.
Inside this menu, you should look for "Flash at Notifications" or "Flash for Notifications." Activation or deactivation of this slider directly affects the operation of the LED module. If the slider is lit in blue or green, then the function is on, and you need to put it in an inactive state.
It's worth noting that in some versions of firmware, this option can be entered into a separate "Special Features" menu. If you don't find the right option in a standard place, try searching by settings by typing "flash" in the system itself, which will give you the desired section, which will greatly simplify navigation.
☑️ Checking flash settings
Configure via the phone application
Sometimes the system settings of the MIUI shell do not overlap the settings set directly in the call app. The standard Xiaomi call has its own configuration menu that prioritizes incoming calls. So if the global switch doesn't help, it's worth looking inside the app itself.
Open the Phone app (green handset) through which you dial. In the upper right corner of the screen, you will see a three-dot icon or a gear that indicates the menu. When you click on it, select Settings from the drop-down list, this action will open access to the internal settings of the communication module.
In the menu that opens, scroll down to the "Incoming Calls" section, and you can have the "Incoming Call Flash" option, which ensures that even if the main menu crashes, the call doesn't have light effects, which is especially true for users who use third-party themes.
⚠️ Note: Some Redmi models with a simplified version MIUI This item may not be available, so you can rely on your system settings or use third-party applications to manage calls.
You can also set up other call settings in this section, like the vibration response or the recording of the conversation, and make sure you don't mix up the options, because some of them can affect the speaker or the screen during the conversation. Once you make changes, just close the settings, they apply automatically.
Use of the "Do Not Disturb" mode
If you have to temporarily turn off all light and sound notifications, such as during sleep or a movie, the easiest way to use Do Not Disturb mode is to block not only the flash, but also the sounds and vibrations, allowing the phone to remain completely silent.
To activate this mode, lower the swipe notification curtain from top to bottom, find an icon with a crescent image or a Do Not Disturb icon, and clicking on it will activate the mode, which the corresponding symbol will notify you in the status bar, in which state the flash when you call will definitely not work, since the system blocks all types of alerts.
You can flexibly set this mode in the settings menu. Go to Settings → Sound and vibration → Don't disturb. You can set an automatic turn-on schedule, for example, from 23:00 to 07:00. You can also create an exception list for favorite contacts so that their calls are accompanied by a signal.
How to set a silence schedule?
Using this mode is a great way to keep your battery and nerves high. However, remember that in this mode you can miss a really important call if you don't set the exception list correctly. So use this feature wisely, especially during working hours.
Often, the cause of an uncontrolled flash flash is third-party applications for calling or managing notifications. Users often install Truecaller, GetContact or various “smart” calls that have their own display settings that overlap the system.
If you use an alternative calling app, you need to look for settings inside it, usually in the "Design," "Visualization" or "Effects" section, and you need to find a flash on call or "Flash on Call" item and deactivate it. The interface of these applications may be different, but the logic remains the same.
In addition, there are special flashlight apps that can have a "alarm" or "blink at events" function. Check the list of installed applications for suspicious utilities with camera access or notifications. Deleting or configuring such programs often solves the problem instantly.
| Annex | Probability of conflict | Where to look for settings | Decision |
|---|---|---|---|
| Truecaller | Tall. | Settings → Visualization | Turn off Flash on Call. |
| GetContact | Medium | Profile → Settings | Check the effects. |
| Super Flashlight | Tall. | Settings → Signaling | Remove the application or deny access |
| Call Flash - Caller ID | Critical | Settings of the topic | Deinstall |
⚠️ Warning: When installing any apps from the Google Play store that request access to the camera and phone, always check reviews. Many are specifically designed to flash flash, and are difficult to completely disable without removing them.
Access to the engineering menu and hidden settings
For advanced users who have not found a solution in the standard interface, there is an option to access hidden settings through the engineering menu, which is a powerful diagnostic tool, but it requires caution. Any wrong action here can lead to unstable operation of the communication module.
To enter the engineering menu, open the Phone app and dial the combination ##6484## or ##4636##. The code can vary depending on the CPU model (Snapdragon or MediaTek). If the code is entered correctly, a special testing menu will open.
From the menu, select Phone or Phone Information. Scroll down to the indicator section (may be called LED Control or similar). You can force the driver-level LED control to be disabled. However, be prepared for the reset to reset.
💡
Before you enter the engineering menu, take a screenshot of all the current settings, and if something goes wrong, you can return the original settings.
This method is only justified in extreme cases when standard methods do not work. In most situations, it is enough to simply update the firmware to the latest version, since new security patches often fix bugs associated with peripheral management.
Specificity of Redmi and POCO models
Xiaomi’s sub-brands, Redmi and POCO, often have their own software features, particularly in the low-end models of the Redmi Note or POCO M series, the path to settings can be slightly changed due to the optimization of the interface for less powerful hardware.
On the devices. POCO shelled POCO Launcher flash settings are sometimes hidden in the "Themes" or "Theme Store" section if a dynamic theme is used. Check if you have a special visual style that force flashing on. Switching to a standard theme often solves the problem.
Redmi models have a physical Quick Access button that can be reconfigured. Make sure that this button is not assigned to run a flashlight in alarm mode. Check this in the Settings menu → Additional Features → Buttons.
⚠️ Note: Some global versions of Redmi firmware may not translate the menu correctly. Look for items with similar meanings, even if they are called oddly, such as "Michael" or "Light signal".