Where to look for menus in Xiaomi TVs and consoles: the full guide 2026

Have you just bought a Xiaomi TV or a Mi Box, but can't find out where the main menu is hiding? Or has the interface changed and the settings have disappeared after the firmware update? This problem is familiar to many users - especially those who have switched from other brands' TVs (Samsung, LG) on MIUI TV Android TV Xiaomi.

Unlike classic Menu remotes, Xiaomi devices often use contextual menus, hidden gestures, or button combinations. In this article, we’ll look at all the ways you can access settings, from basic to hidden engineering menus, and why menus can go missing after updates and how to fix them.

Note: the location of the menu depends on the firmware version (MIUI TV 3.0 vs 4.0), device type (TV vs console) and even regional settings. So we put together instructions for all the current models from Mi. TV 4A before the flagship Xiaomi TV Q2 Mi Box S and 2nd Gen.

1. Standard menu on Xiaomi TVs (MIUI TV)

Most of Xiaomi smart TVs use a branded shell MIUI TV. There's no classic Menu button, instead of a smart tab system. Here's how to get there:

On the remote, find the Settings button or the Home button, and press it once, and the main panel with five main sections opens:

• 📺 Recommendations – content from streaming services
• 🎬 TV – broadcast channels and signal sources
• 📁 Annexes — established programmes
• 🔧 Settings - System menu (analogue of Menu)
• 🔍 Search – Global Search for Content

To access the full settings of the TV, select Settings (cogs) section. Here you will find:

• 📶 Network and Internet (Wi-Fi, Ethernet, VPN)
• 🔊 Sound (equalizer, headphone access)
• 🖥️ Screen (resolution, refresh rate)
• 🔄 Update (firmware check)
• 🔒 Security (app blocking, parental control)

⚠️ Note: On Xiaomi TVs with version MIUI TV Below 4.0, the Settings section can be called All Settings. To open it, press the Home button on the remote for 2 seconds.

2.Where is the menu on the Mi Box (Android) consoles TV)

Mi Box S, Mi Box 4 and other Android models TV They have a different interface. Here, the menu is divided into two levels:

Quick settings (similar to a curtain on a smartphone) are opened by a long press of the Home button on the remote.

• 🔇 Quickly turn off the sound
• 📶 Reverse Wi-Fi/Bluetooth
• 🔋 View the level of the remote charge
• ⚙️ Go to full settings (Share button)

The full settings menu opens as follows:

1. Press Home on the remote.
2. Scroll up to the Settings section (cog in the upper right corner)
3. Select the desired subsection: Network, Applications, Device, etc.

💡 Tip: You can open a hidden engineering menu on the Mi Box for diagnostics:

Press sequentially: Home → Home → Up → Up → Down → Down → Left → Left → Right → Right → Up → Up → Up → Down → Down → Down → Down → Down →

After that, the Developer Options menu will open with advanced settings.

3. Alternative ways to open the menu (if the buttons don't work)

Sometimes standard methods don't work, like when you reset your settings or when you connect a third-party remote, and in such cases, it will help:

⚠️ Note: If after updating the firmware, menu sections (for example, Developer Options or other services) are missing HDMI-CEC), This may be due to regional restrictions. To return hidden settings, change the region in Settings. → System → Region to India or United States.

On Xiaomi TVs with firmware MIUI TV 5.0+ The Developer Menu is hidden by default. To enable it, go to Settings. → About TV and 7 times click on the line Version MIUI TV.

Make sure the batteries are not discharged.|Check the IR port on your TV (not covered by a decorative panel)|Reconnect the remote via Bluetooth (for the Mi Box)|Reset the remote to factory settings (Reset button on the back panel)-->

4. Search for hidden menus (service and engineering)

In addition to standard settings, Xiaomi devices have diagnostic and calibration service menus that are useful for:

• 🔧 Color and brightness settings at matrix level
• 📡 Signal checks Wi-Fi/Bluetooth
• 🔋 Battery testing (for portable models)
• 🖥️ Sensor calibrations (gyroscope, accelerometer)

How to access hidden menus:

For Xiaomi TVs (MIUI TV):

1. Turn off the TV from the socket


2. Press the Menu button on the remote




3. Turn the TV on the net, holding the Menu for 10 seconds




4. Release the button - Factory Menu opens

For the Mi Box (Android) TV):

1. Connect the keyboard via USB/Bluetooth


2.Push Ctrl + Alt + T at the same time




3. Enter the command: adb shell am start -n com.android.tv.settings/.device.devicesettings.DeviceSettingsActivity

⚠️ Note: Changing the settings in Factory Menu may result in loss of warranty or device failure, such as incorrect calibration of the matrix on Xiaomi TV Q2 It can cause the panel to overheat. We recommend backing up before making changes.

💡

If you need to reset your TV settings to factory settings but the menu is not available, use hardware reset: on the back, find the Reset button (usually next to the Reset button). HDMI-Ports) and hold it for 15 seconds with a toothpick.

5. Why the menu may be missing and how to fix it

Users often face a situation where a menu section suddenly disappears. Causes and solutions:

1. Firmware update

After Automatic Update MIUI TV Android TV The interface may change. MIUI TV 4.0, the audio settings were moved from System to Device to return to the familiar look:

• 🔄 Roll back the firmware through Settings → Update of the PO → Recoil
• 📱 Install an alternative launcher (for example, ATV Launcher for Mi Box)

2. The remote malfunction

If the Xiaomi remote starts to “glutch” (does not open the menu, skips clicks), try:

1.Reset the remote: Remove the batteries, press any button for 30 seconds


2. Reconnect to Bluetooth: Settings → Remote → Add the device




3.Use the Mi Remote app on your smartphone as a temporary replacement

Regional restrictions

On TVs for the Chinese market (Mi) TV 5 Pro CN) part of the menu is hidden to unlock:

1. Install. VPN with servers in Hong Kong or Singapore
2. Change region to Settings → System system → Region
3. Restart the TV.

💡

If after the change of the region lost Russian fonts, set the language pack through Settings → System system → Language and keyboard → Additional settings.

6. Customize the menu for yourself: personalization of the interface

Interface. MIUI TV Android TV It's flexible. That's what you can change:

On Xiaomi TVs (MIUI TV):

• 🎨 Change the order of tabs: pinch OK on the right section and drag
• 🔕 Remove unnecessary items: Settings → Main screen screen → Set up
• 🌓 Include a dark theme: Settings → Screen. → Dark mode.

On the consoles of Mi Box (Android) TV):

• 📌 Secure applications on the main screen: highlight the icon → Add to the select few
• 🔤 Change the voice assistant: Settings → The device → Voice input
• 🖼️ Change wallpaper: Settings → Main screen screen → von

For advanced users, custom launchers are available:

⚠️ Attention: Installing third-party launchers on Xiaomi TVs with MIUI TV This may cause a conflict with system applications. MIUI TV In Settings → Annexes → System applications.

7. Frequent mistakes and how to avoid them

When working with the menu on Xiaomi devices, users often make typical mistakes:

1. Accidental resetting of settings

Settings menu → System system → It's easy to start a full reset by pressing the wrong button to avoid data loss:

• 🔐 Set a password to the Reset section in Settings → Security
• 📱 Export settings regularly through Settings → System system → Backup

2.Blocking the menu with parental control

If the Settings menu is not available, check:

1. Go to Settings → Security → Parental Controls


2. Enter the PIN (by default 0000 or 1234)




3. Disable restrictions for System Settings section

3. Loss of access after update

If after updating the firmware menu opens in a pared-down form:

1. Check the version of the software in Settings → On TV.
2. Forced update the app MIUI TV Launcher through Settings → Annexes
3. Clear the cache of system applications: Settings → Annexes → Show system-based → Clear the cache

💡

Before any firmware update, disable Auto Update in Settings → Software updates. This will help avoid unexpected interface changes.

FAQ: Answers to Frequent Questions