Setting the screen orientation on Xiaomi Redmi

Users of Xiaomi and Redmi smartphones often face a situation where the device screen refuses to turn when the case changes its position in space, a phenomenon directly related to the operation of a function known as orientation. Understanding how it works and which sensors are responsible for it is necessary for comfortable use of the gadget.

Orientation in the phone is a hardware-software function that detects the position of the device relative to the ground and automatically changes the direction of the output image. At the heart of this process is the complex interaction of the accelerometer and the gyroscope. If one of these components is not working correctly or the software settings are down, the user faces a "stick" image in a vertical or horizontal position.

In the MIUI shell and the new HyperOS, this parameter is managed in a user-friendly interface, but hidden settings may require manual adjustments. To understand the intricacies of sensors and learn how to forcefully control the turn of the screen is to gain full control over the multimedia capabilities of your smartphone.

Principle of operation of rotation sensors

The sensors that make the position of the smartphone in space are built-in, and the main element is an accelerometer that responds to gravity and acceleration, and it tells the system that you've flipped the phone, and the gyroscope adds that data by tracking the device's rotation around three axes with high precision.

Modern Redmi Note models and flagship series use combined modules, where both sensors are combined into a single chip, which allows for instant interface response, but software failures can lead to data desynchronization when the phone does not “understand” the orientation of the owner.

And it's important to note that calibrating these sensors is a delicate process, and factory settings can get lost after falls or strong magnetic impacts, and in these cases, programmatic resetting or recalibrating through the engineering menu is the only way to get it back to work.

⚠️ Attention: Using third-party apps to "boost" the sensor signal often backfires and drains the battery.

Understanding the physical nature of the process helps avoid false conclusions about a breakdown, so if the phone is on a flat surface and the screen is not on, it's normal, problems begin when there is no reaction to movement or when there is a delay.

Basic screen management techniques

There are several levels of image rotation control in Xiaomi smartphones, the basic method is available through the Quick Action Panel, and you swipe from top to bottom to open the Curtain, and find an icon with two arrows forming a circle, and this control activates or deactivates the automatic mode.

When the function is active, the system decides when to turn the picture. If it is turned off, the screen will be locked1 in the current position, regardless of how you rotate the device in your hands. This is convenient when reading in the supine position, when random turns can be annoying.

There is also an extended settings menu available through Settings → Screen, where you can find additional options, such as blocking orientation on the desktop or in certain applications. Deep customization allows you to adapt the behavior of the interface to the individual habits of the user.

• 🔄 Automatic mode: the screen turns itself when the phone is tilted.
• 🔒 Fixation: The image is frozen in current orientation.
• ⚙️ System restrictions: some applications block the turn forcibly.
• 📱 Desktop: often has a separate lock setting in the launcher.

Some users prefer to use navigation buttons or gestures to quickly access these features, and newer versions of the firmware have the ability to assign double tapping on the back to switch orientation mode, which greatly speeds up access to the feature.

Diagnostics of auto-turn problems

When the screen stops responding to turns, one of the most common complaints of Redmi owners is that before you carry the device to the service, you need to eliminate software errors, and often the problem lies in the banal freeze service responsible for sensors.

The first step is to check the function in different applications. If the browser turns and the gallery does not, then the problem is localized to a particular application, not to the system. Rebooting the device helps to eliminate temporary failures in the driver.

Also worth paying attention to protective films and covers. Too thick protective glass or magnetic case can shield sensors or cause interference. Removing accessories often allows you to instantly restore normal operation of the gyroscope.

If simple methods don't work, you may need to do more in-depth tweaking on the system settings, and it's important to act consistently, checking the results after each step.

Calibration of sensors through the engineering menu

For the precise adjustment of sensors in Android, there is a hidden engineering menu, which is accessed through the standard diagnostic interface on Xiaomi phones, and is the most effective way to correct incorrect screen behavior when a software reset has not helped.

To log in, you need to open the Phone app and type a special code. Depending on the model and version of MIUI, the code may differ, but most often the universal combination is used. Once you enter, the testing menu will open, where you need to select the section associated with touch panels or sensors.

##6484##

In the CIT (Customer Information Test) menu, you need to find the item responsible for the accelerometer or gyroscope (often called the Accelerometer or Gyroscope). Follow the instructions on the screen: you usually need to put the phone on a flat horizontal surface and press the calibration button.

• 📏 Position 1: The phone is flat with the screen up.
• 📉 Regulation 2: Telephone vertically (if required).
• ✅ Confirmation: Pressing the button "Pass" or "Calibrate».
• 🔄 Resetting: mandatory after completion of the procedure.

⚠️ Warning: Do not calibrate with your phone in your hands. The device must lie on a completely flat and stationary surface to accurately read the gravity data.

Resetting settings and software solutions

If the calibration didn't work, there may be some configuration errors in the system, resetting specific services can be used again without losing personal data, and it's worth checking system updates first, as manufacturers often release patches that fix bugs with sensors.

There is a method of resetting through the recovery menu, but it affects all data, a more gentle option is to reset network settings and Bluetooth, since some communication modules can conflict with motion sensors, and cleaning the cache of system applications responsible for the interface also helps.

In rare cases, a factory reset is required, a last resort that will completely delete all your photos, contacts and apps, and make sure to back up your data in the Mi Cloud or on your computer before doing so.

To perform the reset, go to Settings → About Phone → Reset. Select “Erase All Data” option. The process will take a few minutes, after which the phone will return to the “out of the box” state, and the orientation settings will be reset to factory values.

Frequently Asked Questions (FAQ)

💡

When buying a protective glass, choose models with a cutout for the proximity and light sensor - this will improve the operation of all functions related to the position of the phone.

💡

Proper calibration of sensors through the engineering menu solves 90% of software problems with the orientation of the screen on the Xiaomi Redmi.