What to do if a Fastboot crashes on Xiaomi phone

The sudden appearance of the Fastboot logo with the image of a hare repairing an android on the screen of your Xiaomi, Redmi or Poco often causes panic. Many users mistakenly believe that the device failed or the operating system was damaged. However, in most cases this is a standard reaction of the smartphone to an accidental mechanical impact or a software failure.

Fastboot is designed to run a low-level flashing experience through a computer, deeper than standard Android operating system, and allows engineers or advanced users to restore the phone even when the bootloader is damaged, and understanding the nature of this mode is the first step to successfully solving a problem.

In this article, we’ll look at all the possible reasons why your Xiaomi is constantly going into this mode, and provide step-by-step instructions for exiting.We’ll look at methods from a simple restart to complex button manipulations that will help bring the gadget back to life without going to the service center.

Why Xiaomi is moving to Fastboot mode

The main reason for the appearance of the screensaver with a hare lies in the features of the hardware control of Xiaomi devices. On many models, the volume button is located so that it is easy to touch when carrying in your pocket or using a case. When you turn on the phone, simultaneously pressing the power button and the volume button “minus” automatically activates the Fastboot mode.

There are software factors besides mechanical stress: Android malfunctions, failed updates, or application conflicts can trigger forced debugging, and this often happens when trying to get root rights or unlock the bootloader if the process has been interrupted.

In rare cases, the cause is a physical malfunction of the button plume or key sticking. If the case of the smartphone has been hit or moisture, the contacts can close, sending a false signal to the motherboard to enter service mode.

💡

Fastboot often appears without your actions may indicate that the volume button is stuck. Try pressing it several times quickly and rhythmically to mechanically "pattern" the mechanism.

How to exit Fastboot on Xiaomi

There are several proven ways to get your phone back to normal, depending on whether the touch screen and buttons respond to commands, and your device model.

The easiest and safest way to do this is to force a reboot, which requires you to press the power button and hold it for a long time, depending on the Redmi or Poco model, the retention time can vary from 10 to 20 seconds.

If standard retention doesn't work, try a button combination. Some devices have both the power button and the volume buttons simultaneously pressed, and you need to hold them until the Mi or Android logo appears.

Instructions: How to disable Fastboot via buttons

If the phone is responding to presses but just cyclically returning to the hare, you should follow a precise sequence of actions. It is important not to panic and clearly observe time intervals, as the system can ignore short presses.

Take the device in your hands and make sure it's not connected to your computer or charger. Sometimes external current interferes with the correct processing of the reset signal. Press and hold the Power button until the screen is completely turned off.

Once the screen is out, without releasing the power button, wait for the vibration. If the phone vibrates but shows the rabbit again, repeat the procedure, but at the moment of vibration, try to quickly switch to the pressing of the Volume + button without releasing power. This can intercept the boot process.

💡

The rule of thumb is, don't let go of the power button until the screen is completely out and the manufacturer's logo appears.The early release of the button will reset the reboot process.

Resetting settings via Recovery Mode

If simple reboot methods don’t work and the phone goes back to Fastboot, it may be a software failure that requires logging into the Recovery menu to clear the cache or reset completely.

To enter recovery mode on the device turned off (or immediately after leaving the Fastboot), you need to press the Volume+ and Power buttons simultaneously. Hold them until the menu with several items appears in English or Chinese.

In the Recovery menu, the navigation is done with volume buttons (up/down), and the choice is confirmed by the power button. You need to find Wipe Data or Clear Data. Be careful: this step will delete all user data.

Exit from Fastboot with a computer and ADB

For advanced users who can't handle buttons, there's a software method that requires a computer running Windows, USB-cable and installed drivers Xiaomi or ADB.

The method is to send a special command that forcibly removes the device from the bootloader mode, which is effective when the phone buttons do not respond or crash.

First, you need to connect the phone to the PC, then you open the command line in the ADB tool folder, you type in a command to reboot, and the phone system will receive a signal from the computer and restart as normal.

adb reboot

If the standard command fails, you can use a more specific command to exit from Fastboot:

fastboot reboot

Table of error and action codes

In some cases, when you exit mode or try to firmware, the system may give specific messages. Below is a table that helps identify the problem.

Understanding these signals helps you avoid unnecessary actions, such as Orange State status, which often scares users, but for unlocked devices, it is the norm.

Warnings and security measures

When manipulating boot modes, it is important to be careful not to aggravate the situation. Incorrect actions can lead to complete failure of the device.

⚠️ Warning: Never interrupt the firmware process if you decide to reinstall the system.Switching off the cable or battery drain at this point will turn the phone into a brick, which can only be restored in the service.

It’s also worth being careful using third-party software to “cure” Xiaomi, many of which may contain malicious code or be incompatible with your version of MIUI or HyperOS.

⚠️ Warning: If the phone is heated in Fastboot mode, immediately remove the battery (if possible) or try to cool the case.Prolonged CPU operation in this mode without cooling can damage the battery.

The use of original cables is another important aspect: cheap cables can give unstable voltage, which causes failures when trying to communicate with a computer.

Preventing the recurrence of the problem

To prevent the hare with a screwdriver from bothering you in the future, it is worth analyzing the operating conditions of the smartphone. Often the problem is solved by replacing accessories or usage habits.

Check the protective case. If it's too tight or irregularly shaped, it can press the volume button constantly. Take off the case and observe the behavior of the phone throughout the day.

If the problem is software and related to a specific update, you may want to wait for the release of the patch from Xiaomi or, conversely, roll back to the previous stable version of the firmware through the update menu.

💡

To diagnose sticking buttons, you can use special applications from Google Play that show the status of all buttons in real time, which will help you understand which contact is “phonet”.