Xiaomi’s modern wireless manipulators are well-deservedly popular for their minimalist design, ergonomics and high reliability. However, after purchase, users often face the need to quickly synchronize the device with various gadgets, whether it’s a laptop, a desktop PC or even a smart TV. The pairing process can vary depending on the device model and the operating system of the receiving device.
In this guide, we will take a look at the details of Xiaomi’s Bluetooth mouse setup, learn how to activate pairing mode, switch between 2.4GHz and Bluetooth modes, and solve typical driver and device visibility problems. A good initial setup will ensure a stable cursor and long battery life.
Preparation for the first launch and inspection of the completeness
Before you start software setup, you need to make sure that the manipulator is physically ready to work. Unlike wired counterparts, wireless models require a power source, so the first step is always to install the battery. Most Xiaomi models use a standard AA or AAA power cell, which is usually already inside the case in a special compartment.
Carefully remove the battery from the niche on the bottom of the device. USB-Make sure the protective film from the contacts of the new battery is removed, and set it by observing the polarity indicated on the circuit inside the compartment. Once the power is installed, the indicator on the housing may flash, signaling readiness.
It is also important to check the surface conditions on which the mouse will work. The optical sensor installed in models such as Mi Silent Mouse or Mi Portable Mouse is sensitive to glare and transparency. For best grip and tracking accuracy, it is recommended to use a quality mouse mat or a matte table surface.
⚠️ Attention: If you are using USB-Hub to connect the receiver to the laptop, try not to connect it to the ports USB 3.0 near Wi-Fi adapters that are working, as this can cause interference in the 2.4 GHz band.
Activation of the coupling mode on different models
The procedure for putting the mouse in visibility mode for other devices depends on the specific modification of the gadget. Xiaomi releases several lines, and the algorithm for actions for them may differ. Carefully examine the bottom panel of your device to find the mode switch or the pairing button.
For classic models like the Mi Portable Mouse, there's a three-position switch on the bottom panel. 2.4G designed to work with USB-receiver and position BT (Or the numbers 1 and 2) for a direct Bluetooth connection. To start searching for a device by a computer, you need to move the lever to the Bluetooth position and hold the channel select button (if any) or simply turn on the power, after which the mouse will be searchable within a few minutes.
In the Fundding or Gaming Mouse series, the process can be automated. Often, it is enough to simply turn on the device and it will automatically go into search mode if it has not previously been paired with any gadget. Re-pairing may require clamping a combination of buttons, such as left, right and scroll wheel for 3-5 seconds at the same time.
There are also specific nuances for different generations of devices:
- 🔘 Mi Silent Mouse: Requires switching to mode BT and a short press on the connection button at the bottom.
- 🎮 Fundding Gaming Mouse: Often uses long-clamp button combinations to enter pairing mode.
- 🖱️ Mi Dual Mode Mouse: allows you to save profiles for two different Bluetooth devices by switching between them with a button at the bottom.
Connecting a mouse to a computer on Windows
Windows operating system 10/11 It has built-in drivers for most people. HID-And the way you do this is to make it as simple as possible, and once you've put the manipulator into pairing mode, you need to open the system settings. + I or select "Start» → «Parameters” (cog icon).
In the window that opens, go to Devices (in Windows 10) or Bluetooth and Devices (in Windows 11). Make sure the Bluetooth slider is activated and lit blue. The system will automatically start scanning the available space. The listing of Other Devices or Mice should include the name Xiaomi Mouse or a specific model, such as Mi Silent Mouse.
Click on the device name with the left mouse button (or touchpad) to initiate the connection. The system may request confirmation through code, but this is rare for mice. Once the procedure is completed, the Connected status will appear next to the device name, and the cursor on the screen will become manageable.
☑️ Checklist of connection to Windows
Configuring on macOS and Linux systems
Apple users can also easily integrate Xiaomi's peripherals into their ecosystem. The process on macOS is as unified as possible. Open System Settings via Apple's menu (h) or dock panel. Select the Bluetooth section in the side menu or in the main settings grid.
Make sure Bluetooth is on. Put your Xiaomi mouse in Detection Mode. In the Mac Device List, it can appear as "Mouse" or with the full model name. Press the "Plug" button next to the device name. macOS will automatically set the required input profiles and the manipulator will be ready to go.
For Linux-based operating systems (Ubuntu, Mint, Fedora), the process may vary slightly depending on the distribution and graphics shell used. Usually, there is a Bluetooth icon in the top right corner of the screen (in the tray). When you click on it, select Make Visible for the PC adapter, then click on Scan or Search. Once you find the device, select it and press Pair.
If the GUI doesn't work, you can use the terminal. Type bluetoothctl, then scan on. MAC-Address your mouse to enter the pair [MAC-address] and connect [MAC-This is a universal method that works even when the graphical shell fails.
Use of the USB-2.4 GHz adapter
It is not always convenient or possible to use Bluetooth, for example, on a stationary PC without a built-in module or in conditions of severe radio interference. USB-2.4 GHz receiver (dongle) This method provides a more stable connection and lower latency, which is critical for games.
To activate this mode, you need to remove a small USB-a whistle from the battery compartment of the mouse (if it is stored there) and insert it into the free USB-The switch on the bottom of the mouse should be moved to the position 2.4G. The system recognizes the device as standard. HID-Mouse, and installing additional drivers is usually not required.
What to do if USB-receiver?
The advantage of using 2.4 GHz is independence from the Bluetooth stack of the operating system. If your Bluetooth adapter is "glutting" or busy transferring audio to headphones, the mouse through the headphones. USB-The port will be running smoothly, but it's worth remembering that this port will be occupied all the time.
Connection to Smart TV and Android Box
Owners of Xiaomi Mi TVs, as well as Mi Box S or Mi Stick consoles, often want to expand the navigation experience on the Android TV interface. Connecting a mouse to a TV is similar to connecting to a smartphone or tablet. This is especially convenient for web surfing or using emulators.
Go to the settings of the TV, select Add Accessories or Bluetooth. Put the mouse in pairing mode. The device name should appear on the TV screen. Once you select and confirm the pairing, the cursor will appear on the screen. It is worth noting that not all Android TV apps support mouse control, but navigation through the menu will be much easier.
For TVs that do not have Bluetooth built-in (older models), use USB-2.4 GHz is the only option. Just insert the receiver into the USB-TV port. Android system TV automatically recognizes it as an input device.
| Parameter | Bluetooth mode | 2.4 GHz (USB) mode |
|---|---|---|
| Delay (Latency) | Medium/High | Low (minimal) |
| Energy consumption | High-pitched | Low. |
| Port employment | Doesn't take USB. | Demands free. USB-port |
| Stability | Depends on the interference. | Tall. |
💡
If the cursor on the TV moves in jerks, try to move the TV's Bluetooth adapter away from the Wi-Fi router or USB 3.0 drives, as they create strong interference in the 2.4 GHz band.
Troubleshooting and frequent problems
Even with the right setup, there can be situations where the device is not working correctly. The most common problem is that the mouse is not visible in the list of available devices. In this case, make sure that the pairing mode is active. The mouse indicator should flash (usually in blue or green). If the indicator does not burn, check the battery charge or try to replace it with a new one.
Another common problem is the floating cursor or periodic shutdowns, which can be due to a discharge of the battery or poor contact in the body. USB-Try reconnecting the receiver to another port, preferably USB 2.0, since ports USB 3.0 sometimes creates interference, and it’s also worth checking if your computer has specific mouse control programs from other brands (Logitech, Razer) that might conflict with Xiaomi drivers.
⚠️ Warning: If the mouse is no longer responding to movements, but the indicator is on, try turning off the device, pressing the left and right buttons and holding them, turning on the mouse.
In rare cases, a firmware update is required if the model supports this function through specialized software (for example, for game series). For conventional Mi Portable office models, there is no update, and the stability of the work depends solely on the serviceability of the hardware and the version of the OS drivers.
💡
In 90% of cases, connection problems are solved by changing the battery or switching. USB-receiver port to another computer connector.