How to turn off Safe Mode on Xiaomi: The Complete Guide

The sudden appearance of the words "Safe Mode" or "Safe Mode" in the lower left corner of the screen of Xiaomi smartphone often takes users by surprise. The screen is blocked, familiar widgets disappear, and most applications become unavailable to run. This is a system diagnostic state designed to detect errors, but for the average phone owner it turns into a serious limitation of the functionality of the device.

You don't have to panic in this situation, because it's not a virus attack or a hardware breakdown. The system goes into this mode either on your random command, or because of a software failure, or when you find a critical bug in the newly installed software. MIUI and HyperOS have built-in security mechanisms that isolate third-party applications so that you can safely get to the settings and eliminate the cause of the instability.

There are several proven ways to get your phone back to normal, from simple reboots to more complex manipulations of system settings if standard paths don’t work. In this article, we’ll go into detail on the action algorithms for Redmi, POCO and classic Xiaomi models so you can restore full functionality to the gadget.

Reasons for activating Safe Mode on Android

Understanding the reason for the switch to diagnostic mode helps prevent a repeat of the situation in the future, most often the safe mode is forced on by the user when the device is booted, and if you held the volume button while the phone was turned on, the system perceived this as a signal to start in debugging mode.

Another common cause is software conflict: After updating the Android operating system or the MIUI shell, some old applications may not work properly, and the system automatically detects instability and blocks them from running, going into safe mode to protect user data.

⚠️ Note: If the phone goes into safe mode immediately after installing a particular application, there is a high probability that this file contains malicious code or has critical compatibility errors.

Mechanical factors should also be considered: Sticking volume or power buttons due to moisture, dust or physical impact can lead to false signals at start, in which case the physical condition of the buttons requires checking first, since software methods may not work.

Sometimes the cause is system files that are damaged as a result of an unsuccessful interruption of the update or a failure of the file system, in which case the operating system cannot properly load all drivers and services, choosing a minimalistic download option.

Method 1: Standard Reboot of the Device

The easiest and often most effective way to get out of diagnostic mode is to simply restart, and 90% of the time on Xiaomi and Redmi smartphones, it’s easy to turn off and turn the device back on to get the system back on track.

To do this, press the power button and hold it for a few seconds. The menu will appear on the screen with options. You need to select "Switch off" or "Reset." If the touch screen reacts poorly, try using physical buttons or a connected mouse through the device. OTG-adapter.

It is important not to press any other buttons when the brand logo appears. Any press of volume keys can be regarded by the system as a command to re-enter Safe Mode.

If you've left the sign in the corner of the screen after you restart, try to force the restart. Press the power button and hold it near it. 10-15 So, the second that the screen goes out and the device vibrates is the equivalent of retrieving the battery, which helps to reset temporary memory errors.

Method 2: Disconnect through the notification panel

Some versions of MIUI provide a convenient feature to quickly turn off the diagnostic mode right from the notification curtain, which avoids a long reboot if the system is stable but simply limits the functionality.

Unlock the screen of your smartphone and lower the top curtain down. Find a notification with the text "Safe Mode On" or a similar message. Press it and the system will suggest that this mode be disabled. Confirm the action, and the phone will automatically restart.

If there is no such notification in the curtain, check the system settings. Go to Settings, then select About. In some builds, there may be a hidden menu or error log where you can find a command to reset the state.

⚠️ Note: New versions of HyperOS and new versions MIUI The option in the curtain may not be available, in which case rely on methods to reboot or remove problematic applications.

Sometimes the notification is hidden in the list of all notifications.Click on the gear icon in the curtain or swipe through the notification list to reveal hidden system messages.The Android interface changes often, so it's worthwhile to carefully examine all the controls available.

Removal of newly installed applications

If the phone is constantly returning to safe mode after rebooting, the problem lies in third-party software. You need to find and uninstall the application that causes the conflict. In safe mode, all third-party programs are disabled, but their files remain in memory.

Go to the Settings menu and select the Apps section, sort the list by installation date, or simply review the latest programs added, and if you see a suspicious app that you don't remember, or a program installed before the problem occurs, delete it.

To delete, click on the program name and select the "Delete" button. If the button is inactive, press "Stop" first, then try to delete. After removing each suspicious item, restart the phone to check the result.

Pay particular attention to applications that have access to system settings, launchers, or power management, and are often the ones that interfere with the operating system and cause cyclical reboots or diagnosing.

Use of Engineering Menu and ADB

For advanced users who are not helped by standard methods, there are deeper ways to interfere with the system. Using ADB (Android Debug Bridge) allows you to send commands directly to the operating system, bypassing the GUI.

For this you will need a computer, USB-You need to activate the developer mode on the phone. To do this, click on the build number seven times in the About Phone section, then in the advanced settings, turn on Debugging on USB".

Connect your phone to your PC and enter the following command in the command line to reboot to normal mode:

adb reboot

If a normal reboot doesn’t help, you can try the command to force you to exit debugging mode, although it doesn’t work on all versions of Android:

adb shell settings put global safe_mode 0

Using ADB requires caution. Incorrect commands can lead to data loss or unstable system operation. If you are not sure about your actions, it is better to limit yourself to resetting settings or contacting the service.

Resetting settings to factory

When software methods are exhausted, the radical but effective step is a complete data reset: Hard Reset will delete all user data, applications and settings, returning the phone to the "out of the box" state, guaranteed to eliminate software conflicts.

Before starting the procedure, be sure to back up important files, as it will not be possible to restore them after reset. Go to Settings, select About Phone, then Reset. Select the option "Erase all data".

If you can't log in, use Recovery Mode. Turn off your phone completely. Then press the power and volume buttons at the same time. Hold them until the Mi logo appears, then release power, but keep the volume up until the Recovery menu appears.

In the Recovery menu, select the language (if available), then "Wipe Data" and confirm the action. Once the process is complete, select "Reboot." The phone will take longer to boot as the system will be rebuilt.

Diagnostics of hardware problems

Even if the phone continues to boot in safe mode after being completely reset and flashed, there is a high probability of hardware failure, most often the problem lies in the Volume Down button, which closes the contacts.

When the phone is turned on, the system asks the state of the buttons. If the volume button is stuck when pressed, Bootloader regards this as a user command to enter diagnostic mode, in which case the software methods are powerless.

💡

Check the button: Easy press the volume button several times. If it does not emit a characteristic click or it goes tight, it is likely that cleaning or replacement of the mechanism is required.

For a temporary solution, you can try to gently tap the body around the buttons or blow them with compressed air to remove dust. However, this is a temporary measure, and the final solution will require disassembling the device and replacing the button plume.

In some cases, it helps to neatly disconnect the button plume from the motherboard (if you have repair skills), if the plume is disabled, the phone loads normally, then the problem is precisely the mechanics of the buttons.

💡

Constantly going into safe mode after resetting is a sure sign of a malfunction of the volume button or plume.

Frequently Asked Questions (FAQ)