Modern wireless headphones have become an integral part of the life of an active user, and models from Xiaomi are in the lead due to availability and quality. However, the first contact of the device with your gadget is often questionable, especially if you encounter this technique for the first time. The pairing process may seem confusing due to the features of the display and modes of operation, but in fact it is quite logical.
In this article, we will discuss in detail all the nuances of connecting wireless headphones to smartphones based on Android and iOS. You will learn not only the standard algorithm of actions, but also how to solve common problems when one ear does not work or the phone simply does not see the device.
Preparation of headphones for the first turn on
Before looking for a device on the list of available, you need to make sure it's ready to go.New Xiaomi AirDots often come with a protective film on the charging contacts inside the case or on the headphones themselves, which must be taken off.If you ignore this step, the device may not charge and, accordingly, will not turn on.
Place both earbuds in the charge case and wait for the indicator to light up. To activate the pairing mode, you usually need to remove both earbuds from the case at the same time, at which point they must automatically go to the waiting mode of connection, as signaled by a fast flashing indicator.
⚠️ Warning: If the lights don't blink or are dim, it's likely that the battery is critically low. 15-20 minutes before attempting activation.
It is important to understand the difference between standby mode and search mode. Indication can behave differently depending on the specific model, whether it is AirDots Basic, Youth Edition or the newer Redmi Buds. In some versions, you need (hold) touch panels on both headphones for 5-7 seconds until the indicator starts flashing white.
Algorithm of connection to smartphones on Android
Android provides a lot of control over Bluetooth devices, so to start the process, open your smartphone's settings and go to the wireless networking section, where you activate the communication module if it's off and start looking for new devices.
When the headphones are in pairing mode (the indicators flash), they will be visible in the list of available devices on the phone screen.The name can be displayed as Mi True Wireless EBTS Basic Headset, AirDots or Redmi AirDots. Click on the name to start the connection procedure.
☑️ Checklist of connection
Once you've successfully connected, you'll hear a "Connected" voice message, and the headphones will go out or flash less frequently to indicate the operating mode. You can now enjoy music or conversation. It's worth noting that modern versions of MIUI and Android often show the charge level of each headphone separately in the notification curtain.
Matching with Apple iOS devices
iPhone and iPad owners can also easily use Xiaomi products, although the process may be slightly different visually. The principle of operation remains the same: switch the headset to search mode and activate Bluetooth in the iOS settings.
Unlike the original AirPods, which open a pop-up with animation, AirDots requires you to manually select the device in the Other Devices list. Once clicked, the system will request a pairing confirmation, and in a couple of seconds the device will be ready to go.
Special attention should be paid to the setting of the microphone. By default, iOS can use the microphone of the phone to make calls, even if the headphones are connected. To fix this, during a conversation, click on the audio icon and select Xiaomi AirDots as the sound source, which will ensure full use of the stereo mode and the built-in microphone of the headset.
💡
To improve the sound quality on iOS, go to Settings → Music → Equalizer and select Late Night or Increase Bass mode, as the standard setting may sound flat.
Problem Solving: Only one headphone works
One of the most common problems users face is when the sound comes from only one earbud, or they don't sync with each other, because the left and right channels are out of sync, which is solved by the reset procedure.
To start, you need to “forget” the device in your phone’s Bluetooth settings. Find AirDots in the list of previously connected devices and select “Forget this device” or “Disable.” Then turn off Bluetooth on your smartphone.
| Symptoms. | Possible cause | Decision |
|---|---|---|
| Only one works. | Dissynchronization of channels | Reset settings (Reset) |
| Quiet sound | Grid contamination or low charge | Cleaning and charging |
| No auto-connection. | Memory error of the device | Complete resetting and remigrated |
Then you reset. Put both earbuds in the case, then pull them out. Quickly press 5 times on the touchpads of both headphones (or hold for 20 seconds depending on the model) until the lights blink several times, which will return them to the factory settings.
⚠️ Warning: During the reset procedure, do not try to connect your headphones to your phone.
After reset, turn on Bluetooth again on your phone and search. Now both headphones must be identified as a single device, and the sound will go in stereo mode. If the problem persists, try repeating the procedure by completely discharging the case and headphones.
Management settings and additional functions
Basic management of Xiaomi AirDots is carried out through the touch panels located on the body of each headphone. However, standard settings may not always be convenient. To expand the functionality, it is recommended to install the Mi True Wireless app or Xiaomi Earbuds from the official store.
In the app, you can update the firmware of the headphones, which often fixes connection bugs and improves stability. You can also customize gestures: double touch, triple or long retention can be reassigned to call the assistant, switch tracks or activate game mode.
What is a game mode?
Some models support automatic wear detection. If you take off your headphone, the music is paused and resumed when you return to your ear. Check if this feature is on your model's specification, as it may not be available on the budget versions of Basic.
Device care and extension of service life
To make wireless headphones last a long time, it is important to keep the contacts clean. Metal pads on the headphones and inside the case become oxidized or contaminated with earwax over time, which leads to poor charge.
Wipe the contacts with a dry soft cloth or cotton swab slightly moistened with alcohol. Do not allow moisture to enter the body, as most models have spray protection (IPX4) only, but not from immersion in water.
Keep your case with headphones in a dry place, away from direct sunlight and heat sources. Lithium polymer batteries used in AirDots are sensitive to overheating, which can irreversibly reduce their capacity.
💡
Regular clean charging contacts are the main secret to the long life of wireless headphones, preventing 90% of problems with turning on.