How to connect a wireless mouse Xiaomi: a step-by-step guide

Modern peripherals from Xiaomi are famous for their minimalist design and high autonomy, but the process of their initial activation in inexperienced users is often questionable. The Mi Silent Mouse wireless mouse or the more advanced model of Xiaomi Dual Mode Wireless Mouse require a specific approach depending on the chosen communication interface. Errors in the interface stage can lead to the fact that the device will not respond to movements, even if the batteries are fully charged.

In this guide, we will discuss in detail the algorithms for both types of connection: via a 2.4 GHz radio channel using the use of a radio channel. USB-Understanding the difference between these methods will save you time and avoid common mistakes, such as trying to turn on Bluetooth on a computer that does not support it, or ignoring the protective isolation of the battery.

Before you get to the software settings of the operating system, you need to make sure that the gadget is physically ready for work. Often the problem lies not in the drivers, but in the banal lack of contact inside the battery compartment or the forgotten transport lock, we will look at all the nuances to make your interaction with the equipment as comfortable as possible.

Preparation of the device and verification of the power elements

The first step is always visual inspection and installation of power supplies. Most Xiaomi models, including the Mi Portable Mouse, are powered by standard AA or AAA batteries. It is important to use quality power cells, since cheap counterparts can give off unstable voltage, which leads to cursor desynchronization.

Inside the battery compartment, under the lid, is often the self. USB-It's tightly inserted into a special slot to keep it safe during transportation, and it's critical to remove the receiver before you try to turn it on, otherwise the mouse will be in search mode and will not be able to connect to the computer. Also note the presence of a transparent plastic film between the battery contact and the housing – it must be removed.

• 🔋 Install new batteries, observing the polarity indicated on the circuit inside the compartment.
• 📡 Extract. USB-adapter from the niche under the cover if you plan to connect through 2.4 GHz.
• 🔘 Check for a Dual Mode Switch on the bottom of the device.
• 🛡️ Remove transport insulation film from power contacts.

⚠️ Attention: Don't leave. USB-receiver inside the compartment during long-term storage of the device without use, as this can lead to a deep discharge of installed batteries.

Once power is installed, the light on the body may fade once or not at all, which is normal for energy-saving models. If you use a model with Dual Mode mode, make sure the switch is in the right position: icon USB-adapter plug or Bluetooth logo for wireless connection.

Connection through USB-2.4 GHz adapter

This is the simplest and most versatile method, because it doesn't require a built-in Bluetooth module in your computer. 2.4 GHz technology provides a stable signal with minimal latency, which is especially important for office work and design (USB-whistle) the system recognizes the device as standard HID-keyboard.

Insert the previously removed adapter into free USB-port of your laptop or desktop PC. Windows operating systems 10/11 macOS will automatically find the drivers within seconds, at which point a device setting notification may appear on the screen, which can be ignored or closed.

If the cursor does not appear, try to move the adapter to another port, preferably USB 2.0, since USB 3.0 ports can in some cases interfere with wireless signals at a frequency of 2.4 GHz. It is also worth checking whether the LED indicator on the bottom panel of the mouse is on when active movement - this indicates the operation of the sensor.

💡

If you have a computer, connect it. USB-adapter through the extension cord in front of the housing to avoid shielding the signal with the metal body of the system unit at the rear.

Bluetooth pairing (for Dual Mode models)

Ultrabooks and tablets often lack the ability to use USB-So you have to use Bluetooth to do this, and you have to have your mouse maintain a profile. BLE (Bluetooth Low Energy.The pairing process requires the device to be put into detection mode, which is done by a combination of buttons.

On the bottom of the device, find the mode switch and set it to Bluetooth. USB-In the mode, you need to activate visibility, and usually you need to press and hold the mode switch or separate pairing button for a period of time. 3-5 seconds until the indicator starts to flash quickly.

Next, open the Bluetooth settings on your computer:

1. In Windows, go to Settings → Devices → Bluetooth and other devices.
2. On macOS, open System Settings → Bluetooth.
3. In the list of available devices, find Xiaomi Mouse or Mi Silent Mouse.
4. Click "Connect" and wait for confirmation.

⚠️ Note: When connected via Bluetooth, the mouse may not work until the operating system is fully loaded, as Bluetooth drivers load later than drivers. USB.

It's worth noting that when using Bluetooth, communication may be less stable in places with large congestion of wireless devices. If you notice delays, try switching to a new one. USB-adapter or bring the receiver closer to the work area.

Setting up sensitivity and additional functions

Many Xiaomi models, such as the Mi Dual Mode Wireless Mouse, have hidden functionality that is activated without installing additional software. Change DPI (sensitivity sensor) is a combination of buttons, which allows you to adapt the mouse for different tasks, from accurate graphics to fast movement on the screens.

To change the sensor resolution, you usually use the simultaneous pressing of the left and right buttons, or the left button and the scroll wheel. Hold the combination for 3 seconds until the indicator blinks a certain number of times, indicating the selected DPI level.

More complex settings, such as button reassignment or scroll speed settings, may not be available in standard mode, however, some features can be activated through hidden menus or specialized software if it is available for your model on the official website.

Solution: the mouse is not working or the signal is lost

Even reliable devices have malfunctions. If the cursor moves in jerks or periodically disappears, first check the battery level. Weak charge is the most common cause of unstable radio module operation. It is also worth making sure that there are no massive metal objects between the receiver and the mouse.

If the computer "sees" the device but it doesn't respond to commands, try removing the device driver through Device Manager. Find the "Mice and Other Pointing Devices" section, right-click on the HID-compatible mouse, and select "Delete Device." After restarting, the system will install the driver again.

• 🔄 Reconnect. USB-Adapter to another port (preferably) USB 2.0).
• 🔋 Replace your batteries with new ones, even if the old ones seem to work.
• 📶 Remove sources of interference: Wi-Fi routers, wireless charging, mobile phones.
• 💻 Update the drivers of the motherboard chipset and Bluetooth module.

⚠️ Attention: Use USB-Low quality extensions can cause voltage drops and unstable operation of the receiver, especially if it is connected through an inactive hub.

If problems persist on multiple computers, the receiver-mouse pair may have been desynchronized. In some cases, re-pairing helps: turn off the mouse, remove the adapter, turn on the mouse, insert the adapter, and immediately press the button combination to force the search (if one is provided by the model).

💡

90% of wireless mouse problems are solved by replacing batteries or reconnecting the adapter to a USB 2.0 port directly to the motherboard.

Compatible with macOS and Linux

Xiaomi devices are positioned as cross-platform, but users of macOS and Linux may encounter the peculiarities of the buttons. By default, side buttons may not function or work incorrectly without reassigning to the system.

On macOS, you need to go to System Settings → Mouse to adjust tracking speed and scroll direction. Note that natural scrolling in macOS can conflict with the logic of running the wheel in Windows if you switch between systems.

For Linux users (Ubuntu, Fedora, Mint), the mouse is defined as a standard input device. However, DPI fine-tuning or double-click speed may require utilities like xinput or graphical mouse configuration interfaces. In the terminal, you can check the device recognition by the xinput list command.

If the mouse falls asleep and doesn’t wake up for a long time, check the USB autosuspension settings in the kernel or BIOS configuration.