Always On Display on Xiaomi Redmi Note: Detailed Guide to Enable and Configure

The feature is Always on Display (AOD) On smartphones, the Xiaomi Redmi Note allows you to display key information on the screen even when it is turned off, which is convenient for quickly viewing the time, date, notifications and charge level without the need to unlock the device. However, not all users know how to turn on and configure this option correctly – especially on budget models of the Redmi Note series, where the implementation of the new model is not possible. AOD It may be different from the flagship devices.

In this article, we will discuss in detail how to activate Always On Display on different generations of Redmi Note (from Note 8 to Note 13), what settings are available for customization, and how to minimize the impact of the feature on autonomy. AOD, Xiaomi does not advertise in the standard instructions, and how to circumvent the restrictions on models with the AMOLED- and LCD-screen.

What is Always On Display and Why is it Used on Redmi Note?

Always On Display (AOD) — This is a technology where a portion of the pixels of the screen stay active in standby mode, displaying the minimum information needed:

• 🕒 Time and date (with the option of choosing the style of the watch)
• 📳 Notifications (from messages, calls, mail)
• 🔋 Battery level (optional)
• 🎨 Customizable elements (weather icons, steps, music player)

Main advantages AOD on the Redmi Note:

• ⚡ Quick access to information without unlocking (saves time and reduces wear and tear of the power button).
• 🔍 Convenience in the dark - the screen is illuminated minimally, without blinding the eyes.
• 📱 Gesture support (on some models, you can flip through notifications directly from a locked screen).

However, there are also disadvantages: on devices with LCD-screens (e.g. Redmi Note) 10/11 s IPS-panel) AOD It works differently - instead of partial pixel illumination, a full-fledged display at low brightness is used, which increases battery consumption. AMOLED-screens (Redmi Note) 12 Pro+, Note 13 Pro) energy consumption is minimal thanks to black pixel switching off technology.

Redmi Notes are always on display

Not all Redmi Note smartphones have built-in support AOD. Below is the intergenerational compatibility table:

If your model does not support AOD "Out of the box, don’t despair: in the section on alternative solutions, we will tell you how to circumvent this limitation.

⚠️ Attention: On devices with LCD-With screens (like the Redmi Note 10 without the Pro console), the Always On Display feature on the menu can be called Ambient Display and run on a timer (only when new notifications are turned on). AOD!

How to turn Always On Display on Redmi Note

Activation process AOD depending on the version MIUI Below is a universal instruction manual for devices with official support for the feature (starting with the Redmi Note 11).

1. Open Settings and go to the Screen (or Display in new versions) section MIUI).
2. Select Always On Display (on some firmware – Ambient Display or Lock and Protect) → Always On).
3. Activate the switch at the top of the screen. If there is no option, check: 🔄 Is the firmware updated (path: Settings) → The phone. → Updating the system). 🔒 Is the boot loader unlocked (on some models) AOD hidden before unlocking). 📱 Does your model support a function (see table above).

Configure the information displayed:

Watch style → Choose a design


Notifications → Enable the display of app icons




Battery → Activate the display of the percentage charge

Press Ready and lock the screen to check the work AOD.

If after activation the screen does not show information in standby mode:

• 🔋 Check if the power saving mode is activated (Settings) → Battery → Energy saving regime).
• 🛠️ Reset the device.
• 📲 Update the application System settings in Google Play.

💡

In the models with MIUI 14+ can be activated dynamically AOD, It automatically changes the style of the watch depending on the time of day. AOD Choose the Dynamic Style option

Always on Display: Hidden Opportunities

Most users are limited to basic settings AOD, but MIUI hidden several useful options that can be activated through the developer menu or third-party applications.

1.Chronicle change

Xiaomi offers several built-in watch styles for AOD, But they can be expanded:

• 🎨 Set a theme from the theme (Settings) → Themes – Some themes add unique styles AOD.
• ⬇️ Download the extra hours from MIUI Theme Store (not available in all regions).
• 🛠️ Use apps like Always On Edge for customization (root required on some models).

2. Set up notifications

By default. AOD Shows notification icons, but you can configure:

• 📵 Hiding Confidential Notifications: Go to Settings → Notifications → Notification settings on the lock screen and select Do not show content.
• 🔕 App exclusion: In the same menu, turn off notifications for unnecessary apps (e.g. games).
• 🔄 Frequency of updates: on some firmwares you can set the interval of updates AOD (For example, every 10 minutes instead of a permanent display).

3. Energy conservation

To reduce battery consumption:

• ⏱️ Set a work schedule AOD (For example, only at night or during working hours).
• 🌓 Activate adaptive brightness for AOD screen-setting.
• 🔋 Turn off the battery display if it is not critical.

Always On Display on Redmi Note LCD-screen-by-screen

If your Redmi Note is equipped with LCD-display (e.g., Redmi Note 10 or Note 9 Pro), standard AOD It's going to consume a lot of power, because the screen is turning on completely, but there are a few ways to get around that limitation:

1.Use of Ambient Display

This feature only shows notifications and time when new events (calls, messages) are happening and shuts down after a few seconds to set it up:

1. Go to Settings → Screen → Ambient Display
2. Turn on the option to Show at new notifications.
3. Choose the style of the watch and set the display timeout.

Third-party annexes

Apps like Always On AMOLED or Glance Plus emulate AOD even LCD-screens, but with reservations:

• ⚠️ Increased battery consumption (up to 5-10% per hour).
• 🛠️ You need permission to display over other windows.
• 🔒 Some functions (such as notifications) may not work well.

For installation:

1. Download Always On AMOLED from Google Play.
2. Provide all the requested permissions.
3. In the application settings, select a style AOD and activate auto-start.

⚠️ Attention: On the Redmi Note 8/9 s LCD-screens for long-term use of third-party AOD It can cause pixels to burn out (constant display of "shadows" from static elements). 2–3 day-to-day.

Alternative ways to display information on a locked screen

If AOD Not suitable due to high power consumption or lack of support, consider alternatives:

1. Widgets on lock screen

MIUI Allows you to add widgets to the lock screen:

• 🕒 Widget Watch (shows time and date without AOD).
• 📅 Calendar widget (displays upcoming events).
• 🎵 Music widget (control player without unlocking).

To add a widget:

1. Unlock the phone and swipe your finger to the right on the lock screen.
2. Click Add widgets and select the right one.

2.A smart alarm clock with time display

The function of a smart alarm clock in MIUI It can show the time when the phone is lifted:

• 📱 Go to Settings. → Screen. → Smart alarm clock.
• 🔄 Turn on the option to show the time when climbing.

3. Voice assistant for notifications

Configure Google Assistant or XiaoAI to voice notifications:

• 🎤 In the assistant settings, turn on the voice notifications.
• 🔊 Select the applications that need to be announced.

💡

On devices with MIUI 13+ You can combine Ambient Display and lock screen widgets to get functionality close to the lock screen. AOD, but with less battery consumption.

How to Turn Off Always On Display and Reset Settings

If AOD Started to drain the battery too quickly or you no longer need this feature, it can be turned off or reset to factory settings.

Disabling AOD

1. Go to Settings → Screen → Always On Display
2. Deactivate the main switch.
3. Confirm the action if a request appears.

Resetting settings AOD

If you’ve experimented with styles and want to return the standard settings:

1. Open the settings. AOD.
2. Click on the three dots in the upper right corner and select Reset Settings.
3. Confirm the reset.

Removal of third-party applications AOD

If you have used third-party solutions (for example, Always On) AMOLED):

1. Go to Settings → Applications → Application Management.
2. Find the app in the list and click Delete.
3. Clear the cache and data if requested.

⚠️ Note: Some of the scalings after the shutdown AOD com.android.systemui may still be active, consuming the battery. To fully deactivate it, restart the phone or clear the system application cache through Settings. → Memory. → Cleanup.

FAQ: Frequently Asked About Always On Display on Redmi Note