Xiaomi aero fryer: full instructions for setting up and using

Xiaomi aerofryurines are smart kitchen assistants that combine compactness, functionality and integration into the Mi Home ecosystem. However, even such an advanced device requires the right initial setup to unleash its full potential. Many users are faced with questions: how to connect the gadget to Wi-Fi, which modes to choose for different dishes, and how to avoid typical errors when used for the first time.

In this article, we will take a look at the step-by-step configuration of Xiaomi’s aero fryer, from unpacking to delicate cooking options, and focus on the Mi Smart Air Fryer and Mijia Air Fryer Pro models, which support app-based management, how to sync your device to your smartphone, set temperature profiles, and avoid overheating or underheating your products, and finally, answering frequent questions and life hacks from experienced users.

Unpacking and preparation for first inclusion

Before setting up a Xiaomi aperture, it is important to properly prepare the device. Start by unpacking: take all the components out of the box and check the equipment.

• 🔌 The aerofry fryer with the basket itself.
• 📄 Instructions in Chinese/English (Russian version is often missing)
• 🔗 Power cable (in some models - removable)
• 🧲 Magnetic holder for the basket (in Pro models)
• 🧴 Oil collection container (optional)

Before first switching on, be sure to rinse the basket and interiors with warm water with a mild detergent. Don't use abrasive sponges - they will damage the non-stick coating. After washing, wipe the parts dry with a paper towel. In self-cleaning models (such as the Mijia Air Fryer 3.5L), the first run is recommended in Clean-free mode - this will remove factory odors.

⚠️ Warning: Do not connect the aperture to the network immediately after unpacking.Let the device heat up to room temperature (especially if it was stored in the cold) to avoid condensation inside the enclosure.

Power grid connection and initial inspection

Make sure the outlet meets the device’s requirements: most Xiaomi models require a voltage of 220-240 V and power from 1500 W. The use of extension cords or tees is not recommended – this can lead to overheating of the contacts. Connect the power cable to the aperture and plug it into the outlet.

The front panel will display the power indicator (usually blue or green) and the touch-controlled models (Mi Smart Air Fryer 4L) will activate the screen automatically.

1. Press the Power button (or touch icon).
2. Set the temperature of 180°C and the time of 5 minutes with the +/- buttons.
3. Run the test mode with the Start button.

If the device is heated and the fan is operating without any extraneous noise, the initial test is successful, otherwise check the density of the basket closure and the integrity of the sealing gum.

Set up through the Mi Home app

One of the key advantages of Xiaomi’s aero fryers is the ability to control via the Mi Home app (or Xiaomi Home in newer versions), which allows you to remotely start cooking, save favorite recipes and receive notifications about the completion of the process.

1. Download the Mi Home app from Google Play or the App Store.
2. Sign up or sign in to your Xiaomi account.
3. Click + → Add the device → Kitchen → Aerofryer.
4. Choose your model from the list (e.g. Mijia Air Fryer 3.5L).
5. Connect your device to Wi-Fi by following the instructions on the screen.

After successful synchronization, the main functions will appear in the application:

• 📱 Remote start/stop
• 🔥 Temperature and time adjustment
• 📊 History of preparation
• 🛠️ Update of firmware (if available)

⚠️ Note: For stable operation of the device over Wi-Fi, use a router with support for the 2.4 GHz standard. 5 GHz network may not be supported.

Selection of cooking modes and temperature profiles

Xiaomi aerofryries offer several pre-configured modes, optimized for different types of products, and the table below shows the recommended options for popular dishes:

For manual adjustment, use Temp and Time buttons. In touch screen models (Mi Smart Air Fryer 4L), you can save your own profiles. For example, for crispy bacon, set 190°C for 8 minutes, and for vegetables, 160°C for 12 minutes.

💡

If the dish is cooked unevenly, try to reduce the load of the basket by 30%.The overcrowded basket blocks the circulation of hot air, which leads to low-heat in the center.

Additional features and hidden capabilities

In addition to the basic modes, Xiaomi aero fryers have several hidden functions that are not written in the instructions:

• 🔄 Preheating function: Activates by holding the Start button for 3 seconds. Accelerates cooking by 20-30%.
• 🛡️ Children's Block: Activated by Temp combination+ → Time+ → Start (in some models).
• 🧹 Self-cleaning mode: Starts with an empty 200 basket°C for 10 minutes – removes fat and odors.
• 📲 Voice control: via Alice or Google Assistant (requires settings in Mi Home).

The Mijia Air Fryer Pro features a Smart Cook feature that automatically adjusts the temperature to the weight of the product.

1. Put the food in the basket.
2. Select the Smart Cook mode from the menu.
3. Specify the type of product (meat, fish, vegetables, etc.).
4. Confirm the start - the device will calculate the time.

Common Mistakes and How to Avoid Them

Even experienced users sometimes make mistakes when operating a fryer, and here are the most common ones and ways to prevent them:

• 🔥 Overheating of the device: Occurs when placed next to the stove or oven. Keep a distance of at least 20 cm from other heating appliances.
• 💨 Poor air circulation: The basket is overcrowded or the food is stacked too tight. 2/3.
• 🍳 Burning foods: Too much oil is used or the temperature is higher than recommended. For most dishes, 1 tbsp of oil is enough.
• ⚡ Voltage spikes: Connect via extension cord or unstable network. Use a network filter.

If the aperture is turned off during operation, check:

1. Closing density of the basket – the security sensor blocks the operation when the lid is open.
2. Overheating – let the device cool for 10-15 minutes.
3. Clog the vents - clean them with a soft brush.

💡

Regular cleaning of the vents prolongs the life of the device and prevents automatic shutdown due to overheating.

Cleaning and care: how to extend the service life

Cleaning of the Xiaomi aperture should be carried out after each use to avoid accumulation of fat and unpleasant odors.

1. Refrigerate the device before cleaning (minimum 30 minutes).
2. Remove the basket and rinse it with warm water with liquid detergent.
3. Wipe the inner walls with a wet sponge, avoiding water from hitting the heating element.
4. To remove persistent contaminants, use baking soda (1 tbsp. spoon per 1 liter of water).

Every 2-3 months, it is recommended to carry out a deep cleaning:

• 🧽 Wash the removable filter (if any) under running water.
• 🧴 Apply a special detergent to clean aerofryurines (such as Topperr or Miele).
• 🔧 Check the integrity of the sealing gum - when worn, it must be replaced.

⚠️ Warning: Never use metal brushes or abrasive cleaning products – they will damage the non-stick coating of the basket and the inner surfaces.

FAQ: Answers to Frequent Questions