70mai Dash Cam 1S Midrive D06: detailed operating manual

Video recorder Xiaomi 70mai Dash Cam 1S Midrive D06 It's one of the most popular fixation solutions for traffic, because it combines affordable prices, compact dimensions and rich functionality. 1920×1080 upon 30 frames / s, equipped with a wide-angle lens 130° and has a built-in GPS-But even this simple device requires the right setup and installation to unlock the full potential.

In this article, we will analyze not only the basic steps – how to turn on the recorder and start recording, but also the nuances that the manufacturer often misses in the official instructions. For example, how to position the camera optimally to avoid sunshine, or why night photography can be blurry (and how to fix it). 70mai, Without which some features, such as viewing motion tracks or setting up the G-sensor, are simply not available.

Installation and preparation

Before you start, check the contents of the box as standard. 70mai Dash Cam 1S Midrive D06 enter:

• 📹 Adhesive tape recorder 3M
• 🔌 Power cable USB → Mini-USB long-term ~3.5 m
• 🔌 Car power adapter 12V/24V → USB
• 📄 Short instructions in several languages (including Russian)
• 🔧 Plastic lever to remove camera from mount
• 💾 MicroSD memory card (in some kits, usually 16GB or 32GB)

If you don't have a memory card, you'll have to buy it separately, and there's two things that you need to consider: speed class and volume. HD class-mapping UHS-I (U1 or U3) From 16GB to 128GB, larger cards (like 256GB) may not be supported, and avoid cheap no-name cards, which often cause write errors or overheat.

Before installing the recorder, be sure to format the memory card through the device itself.

1. Insert the card into the slot (located on the side of the camera under the cover).
2. Connect the registrar to the power - it will automatically turn on.
3. Press the button. OK (5 seconds before the menu appears.
4. Select Format and confirm the action.

⚠️ Note: Formatting erases all data on the map. If it had important files on it, copy them to the computer beforehand. Also, do not remove the card during formatting - this can damage the file system.

Installation of the registrar in the car: optimal location

The right installation is not only responsible for recording quality, but also for safety, and the basic rule is that the camera should capture the road as wide as possible, but not obscure the driver's view.

• 🚗 The rear-view mirror is the most popular place, the camera does not interfere with the view, and the wire can be hidden under the ceiling skin.
• 🪟 In the upper corner of the windshield from the driver's side - suitable for cars with tinted, where the mount behind the mirror is difficult.
• 🚘 On the windshield torpedo – only if the camera does not block the view and does not reflect in the glass.

When choosing a place, consider:

• 🔆 Direct sunlight – if the camera is constantly illuminated by the sun, the video will appear glare, and the matrix may overheat.
• 🌡️ Temperature – avoid areas near the vents (condensation may accumulate in winter).
• 📶 Reception. GPS — If the signal is weak, try moving the recorder closer to the top of the glass.

For fastening, use a regular sticky pad. 3M. Before gluing, degrease the surface of the glass with alcohol, this will increase the reliability of the fixation. If you need to remove the camera (for example, at night), use a plastic lever from the kit so as not to damage the mounting.

Connection and first activation

Once installed, connect the recorder to power. There are two options:

1. The easiest way to use a lighter is to insert the adapter into the socket. 12V/24V, Mini-USB cable to the recorder.
2. Direct connection to the onboard network - requires interference with electrical wiring, but allows you to hide the cable and connect the recorder to the mains. ACC (recording only when the ignition is turned on) or directly to the battery (work in parking mode).

When you first turn on, the recorder will automatically start recording.

• 📹 Current video (in real time).
• 📡 Indicator GPS (flashes if the signal is not stable).
• 🔋 Charge level (if connected to an external battery).
• 📁 Memory card status (if the red cross burns, the card is not recognized).

By default, the recorder records video in 3-minute cycles, which you can change in settings (more on this below). Also note the audio signal: when you turn on and off, the camera emits a short sound. You can turn it off in the Settings menu. → Sound.

1) Insert density of the Mini-USB cable (often the contact is weakened).

2) Power adapter performance (try connecting to another one) USB-device).

(3) The presence of voltage in the lighter (in some machines it is supplied only with the ignition switched on).-->

Configure via the Registrar menu

Management 70mai Dash Cam 1S Midrive D06 It's done through physical buttons on the body and a touch screen:

• 🔘 OK — Confirmation of choice, login to the menu (hold 5 seconds).
• 🔼/🔽 UP/DOWN — Navigation on the menu, changing the parameters.
• 📷 SNAP — instantaneous shot (holding 3 seconds – switching on / off the microphone).
• 🚨 EMERGENCY — blocking the current video from overwriting (retention of 3 seconds).

To enter the settings, press and hold. OK 5 seconds. Basic parameters that you should set right away:

Pay special attention to setting up the G-sensor. High-sensitivity cameras will block video even when braking or hitting a bump. If this happens too often, install Medium. Also check the microphone: it's on by default, but recording sound in the car can be redundant (and illegal in some countries).

Format a memory card|Set a date and time (or synchronize with each other) GPS)|Set resolution and length of rollers|Check the sensitivity of the G-sensor|Turn off the sound of the buttons (optional)-->

Working with a mobile application 70mai

Annex 70mai (available for Android and iOS) expands the registrar's capabilities:

• 📱 Watch videos and photos in real time.
• 📍 Track the route on the map with reference to the video.
• ⚙️ Customize options not available through the camera menu (e.g. manual exposure).
• 🔄 Update the firmware (if a new version is available).

To connect:

1. Download the app from the App Store or Google Play.
2. Turn on Wi-Fi on the registrar (hold on) UP 3 seconds until the Wi-Fi indicator flashes).
3. Connect to the network. 70mai-XXXX (default password - 1234567890).
4. Launch the app and follow the instructions on the screen.

In the app, look at the Driving Track section, which shows your route with event tags (sharp braking, bumps). GPX or KML Also useful is the Emergency Download feature, which allows you to quickly download secure videos to your phone if the recorder is damaged.

⚠️ Warning: When connected via Wi-Fi, the recorder consumes more power and the memory card can heat up. Don't leave the camera in this mode unattended for long, especially in hot weather.

Typical problem solving

Even with the right setup, there can be failures. Let's look at the most common ones:

1. The registrar is not included

• 🔌 Check the cable and power adapter (try another one) USB-cable).
• 🔋 If the camera was working before but is not responding now, it is possible that the built-in battery has gone down (it is only needed to save files when an emergency shutdown occurs.
• 📁 Remove and paste back the memory card – sometimes the device “hangs” when reading it.

2.The video is recorded in jerks or interrupted

• 📉 Check the speed class of the memory card (needed) U3 or V30 full HD).
• 🔄 Format the card through the registrar (not through a computer!).
• 🌡️ Overheating - if the camera is hot, let it cool. In hot weather, use a sun visor.

3. GPS snoop

• 📡 Move the recorder closer to the top of the windshield.
• 🕒 Give time to search for satellites (up to 5-10 minutes at the first turn on).
• 📱 Update your firmware through the app – sometimes satellite databases are updated.

4. Night photography is too dark or blurred

• 🌙 In the application settings, turn on WDR (Wide dynamic range).
• 🔦 Make sure the lens is clean (dust and dirt impair light transmission).
• 📹 Reduce the permit to 1280×720 — This will increase the sensitivity of the matrix.

Update firmware and reset settings

The manufacturer periodically updates the 70mai Dash Cam 1S Midrive D06, Firmware fixing bugs and adding new features. You can check the relevance of the firmware through the application 70mai Info Device section If a new version is available, follow the instructions:

1. Connect the registrar to Wi-Fi via the app.
2. Go to the Settings → Firmware Update.
3. Press Download and Install.
4. Do not turn off the power until the process is complete (it will take). ~5 minutes).

If after the update the camera began to work unstable (for example, spontaneously reboots), reset to factory settings:

1. Enter the Registrar's menu (hold on) OK 5 seconds).
2. Choose Reset. → Factory Reset.
3. Confirm the action.

After resetting, all settings will return to default, but the video on the memory card will remain intact. If problems persist, try rolling back the firmware to the previous version (firmware files can be found on forums, for example, 4pda.ru).

💡

Update the firmware only through the official application 70mai. Using third-party files can lead to "bricking" of the device.

FAQ: Answers to Frequent Questions