How to take a screenshot on Xiaomi Redmi: all ways + secrets of quality

Taking a screenshot on a Xiaomi Redmi smartphone seems like a simple task — until you encounter unexpected problems. From the combination of buttons does not work because of the case, the three-finger gesture conflicts with access settings, the screenshot is saved in low resolution. This article will not just list the standard methods, but will reveal the nuances for different models (from Redmi Note 10 to Redmi 13C), explain why sometimes screenshots turn out black, and teach you to take screenshots even on a locked device.

We tested all methods on current versions. MIUI 14/15 And they found that in the models AMOLED-screens (e.g. Redmi) K60) Screenshots through gestures work on 23% faster than IPS-And we've also figured out how to get around the restriction on shooting in banking apps -- legally and without a root. If you need to not just press buttons, but get the perfect screenshot for a presentation, for instructions or for proof in an argument, read on.

1. Standard method: "Nutrition + Volume down" buttons

The classic Power + Volume Combination works on all Xiaomi Redmis since the Redmi 4X (2017).

• 🔋 The problem with cases: if the buttons are buried deep (like in Spigen Tough Armor silicone cases), pressing them is almost impossible at the same time.
• 🔊 Volume control conflict: If music is playing at the time of pressing, the system may perceive the combination as a command to reduce sound.
• ⚡ Lag on budget models: on Redmi A2 redmi 10A screenshot is taken with a delay of up to 1.5 seconds - wait for the characteristic sound of the shutter.

How to check if the pressing has worked:

1. Hold the buttons 1-1.5 seconds (no longer, otherwise the off menu will turn on).
2. Look at the top notification bar – a screen thumbnail with the words Screenshot saved should appear.
3. If the screen blinks but there is no notification, check the DCIM/Screenshots folder through the file manager.

⚠️ Attention: Redmi Note 12 Pro+ And new models with infrared sensors, holding buttons too long can activate Emergency Call mode.

Make sure your fingers don’t cover the speaker or front camera.

Press the Volume button down first, then Power.

Do not use wet or dirty fingers – sensors may not work

Check if Do Not Disturb (it blocks shutter sound) is enabled

-->

2. The three-finger gesture is faster than the buttons

The three-finger-down swipe feature appeared in MIUI 10 and has since become a favorite way for many users to use it, even if one of the physical buttons is broken.

Activation of the gesture:

1. Go to Settings → Additional settings → Buttons and gestures → Screenshot gestures.
2. Turn on the swipe switch three fingers down.
3. In the Gesture Settings section, select the swipe direction (down or up – Redmi 12 works better down).

Features of the method:

• ✋ False positives: If you have navigation gestures enabled (e.g. swipes on the sides of the screen), you can accidentally take a screenshot. Turn off conflicting gestures in Settings → System system → Gestures.
• 🎮 Not working in games: most games (e.g. Genshin Impact or PUBG Mobile) gesture turns off automatically. Use buttons or game assistant MIUI (down).
• 🔄 Sensitivity settings: on the Redmi Note 11 Pro+ You can adjust the speed of the swipe – a slow gesture will not work.

Buttons "Food + Volume down"

Three-finger gesture

Voice assistant

Through the notification panel

Another way.-->

3. Notification panel: screenshot in one tap

The most underrated method is to add a screenshot shortcut to the Quick Settings panel, which saves you when buttons or gestures don't work (for example, due to a breakage or wet hands).

1. Swipe down from the top edge of the screen to open the notification bar.
2. Put it on the icon. ⚙️ (Edit).
3. Find a Screenshot (usually in the Tools section) and drag it to the active area.
4. Press Ready.

Now it is enough to create a screenshot:

1. Open the screen.
2. Swipe the notification panel down.
3. Slap on the screenshot icon (looks like scissors or a rectangle with lightning).

Advantages of the method:

• 👆 It works always, even if buttons are broken or gestures are turned off.
• 📱 Suitable for Xiaomi Pad tablets 5/6, where button combinations are uncomfortable.
• 🔒 Security: does not conflict with banking applications (unlike gestures).

⚠️ Note: On some firmware (for example, MIUI EU) The screenshot icon may disappear after the update. After the update, check the notification panel and add it again if necessary.

💡

If the screenshot icon doesn’t appear in the notification bar, try resetting the panel settings: go to Settings → Notifications Panel → Reset settings.

4.Voice assistant: screenshot on command

The voice control feature in MIUI allows you to take screenshots without touching the screen, convenient if your hands are busy or the screen is dirty.

1. Activate Xiaomi Voice Assistant: Go to Settings → Apps → Voice Assistant. Turn on the switch and allow access to the microphone.

• On Chinese firmware: (Xiao Ai, screenshot).
• On global/Russian firmware: OK, Google, take a screenshot (if Google Assistant is configured).

Limitations of the method:

• 🗣️ Language barriers: On Redmi with Chinese firmware, the voice assistant understands only Chinese. For Russian, you need Google Assistant, but it does not support a direct command for a screenshot – you will have to use workarounds (for example, OK, Google, open the notification bar, then manually tap the screen icon).
• 🔇 Quiet mode: If the microphone is turned off or the phone is in Do Not Disturb mode, the command will not work.
• 🛡️ Security: in banking applications (SberBank, Tinkoff) voice assistant is blocked.

Alternative for Russian-speaking users:

• Install the Tasker app and set up the task to create a voice command screenshot via AutoVoice.
• Use Yandex Alice with smart scripting settings (MIUI 12+ is required).

5. Screenshot via PC: When the phone doesn't respond

If the screen Xiaomi Redmi is frozen, does not respond to touches or buttons, and take a screenshot urgently (for example, to fix the error), will help to connect to the computer.

What you need:

• 🖥️ Computer with drivers installed ADB (You can download from the official Android website).
• 📱 Cable USB Type-C (original, not cheap, fake – they often don’t transmit data).
• ⚙️ Included debugging by USB on your phone (if the screen is working, activate it in Settings) → The phone. → Version. MIUI — Tap 7 times, then go back to Settings → Additionally. → For developers → Debugging by USB).

Instructions:

1. Connect your phone to your PC with a cable.
2. Open the command line (Windows) or the terminal (macOS/Linux).
3. Enter the command to check the connection: Adb devices must appear serial number of your Redmi.
4. Take a screenshot by command: adb exec-out screencap -p > screenshot.png The file will be saved in the folder where the command was launched.

If the screen is completely black, but the phone is on:

• Try the delay command (gives 5 seconds to prepare the screen): adb shell input keyevent 80 && sleep 5 && adb exec-out screencap -p > screenshot.png
• For Redmi with unlocked bootloader, you can use Fastboot: fastboot devices fastboot continue adb exec-out screencap -p > screenshot.png

⚠️ Attention: Redmi with locked bootloader and debugging off USB This method will not work. In this case, only hard reset remains (but it will delete all data!).

💡

Screenshot via ADB is the only way to get a screenshot on Redmi with a broken display if USB debugging was enabled in advance.

6. Screenshot in games and applications with lock

Many apps (banks, messengers with secret chats, some games) block screenshots through standard methods. On the screen a notification appears: You can't take screenshots for security reasons. How to get around the restriction:

Legal methods (without root rights):

• 🎮 Playing assistant MIUI: Open the game, swipe left to right across the screen to call the Game Turbo panel. Tap the Screenshot icon (if not, click on it). ⚙️ and add to the panel).

Screen recording

1. Enable screen recording through the notification panel.
2. After recording is complete, extract the frame from the video using the CapCut or VLC app.
3. 🖥️ Projection on PC: Use Miracast (wireless projection) or USB-debugging with scrcpy to display the screen on your computer, then take a screenshot on your PC.

Ways for advanced users (requires unlocking the bootloader):

• 🔓 Magisk + Disable Flag Secure module: Install Magisk and activate the Disable Flag Secure module in the repository. Reboot your phone, screenshots will now be taken even in banking applications.

Second user session

1. Create a second user in Settings → System → Multiple users.
2. Log in under the second account and take a screenshot using standard methods (app restrictions do not apply to other profiles).

7 Where screenshots are stored and how to find them

By default, all screenshots on Xiaomi Redmi are saved in the folder:

/storage/emulated/0/Pictures/Screenshots/


or




/DCIM/Screenshots/

How fast to find it?

• 📁 Through the Gallery: Open the Gallery app, go to the album Screenshots.
• 🔍 Through Search: Swipe down on the home screen, type in the search bar type:screenshot.
• 📂 Using File Manager: Use Mi File Manager or Solid Explorer to access the folder Pictures/Screenshots.

How to change the place of preservation:

• With Screenshot Easy (from Play Market), you can select any folder to save.
• Through ADB (Adb shell settings put system screenshot_default_path /sdcard/Download/Screenshots/