How to Take a Screenshot of Xiaomi Redmi 5 – All the Ways to Work (2026)

Why Redmi 5 screenshots are different than Xiaomi

Smartphone Xiaomi Redmi 5 (with the Redmi modifications 5A redmi 5 Plus, out in 2017 It's still popular with users because of its reliability and low price. MIUI 9/10 (And on the custom versions, even MIUI 11) It's a key difference from today's Xiaomi flagships, for example, there's no standard three-finger gesture that only came out in the first place. MIUI 12.

Another feature is on the Redmi. 5 Screenshots are not saved in the Screenshots folder, but in the «DCIM/Screenshots» or «Pictures/Screenshots» depending on the version MIUI. This is often confusing to owners who are used to a unified folder structure on new devices, and there is no built-in scrolling screenshot feature on this smartphone (like the Redmi Note). 10 or POCO X3), So you have to use workarounds for long pages.

In this article, we will discuss all the current ways to take screenshots on Redmi 5, including button combinations, alternative gestures and third-party applications, and also tell you what to do if screenshots are not saved or there is an error “Can not take a screenshot”.

Method 1: Standard button combination (Power + Volume Down)

This is the basic and most reliable method that works on all versions of MIUI for Redmi 5.

1. Open the screen you want to capture (such as a WhatsApp message or a page in Chrome).
2. Press the Power button (right) and the Volume Down button (left) at the same time.
3. Hold them for 1-2 seconds until you hear the sound of the camera shutter and see the animation of the screenshot.

⚠️ Attention: If you press buttons longer than 3 seconds, the smartphone can start rebooting to Recovery mode or turning off. especially carefully press on worn buttons - they can trigger with a delay.

Screen unlocked and active | Memory is sufficient (minimum 50MB) | Sound is on (to hear confirmation) | Buttons are not stuck and clean-->

Where to look for a finished screenshot?

• 📁 Open the gallery. → Albums. → Screenshots (or) DCIM/Screenshots via file manager).
• 🔍 If the folder is not, check it. Pictures/Screenshots Or use a file search with the.png extension.
• 📱 On some firmware screenshots are displayed in the notification – tap it for quick access.

Method 2: Three-finger gesture (if enabled in settings)

Although Redmi 5 doesn’t support three-finger gestures, it can be manually activated via hidden MIUI settings.

1. Go to Settings → Additional → Special features → Three finger gesture.
2. Turn on the screenshot switch (if you have an option).
3. Swipe down with three fingers on the screen to take a screenshot.

⚠️ Attention: On stock firmware MIUI 9 This gesture often conflicts with Script function (which is not available on Redmi 5).If after the gesture is turned on, the screenshots do not work, go back to the button method.

Alternatively, use a one-finger gesture (if Quick Ball is enabled):

• 🎯 Activate Settings → Additionally. → Quick Ball.
• 📱 Click on the floating button and select Screenshot.
• ⚡ It is convenient for single screenshots, but requires additional tapa.

Method 3: Voice command via Google Assistant

If the buttons on your Redmi 5 are worn or not working, you can take a voice screenshot.

1. Activate Google Assistant (should be installed by default).
2. Say, "OK, Google, take a screenshot."
3. Confirm the action in the window that appears.

🔹 Limitations of method:

• 🚫 It only works when you connect to the Internet (you need access to Google servers).
• 📵 Some firmware requires manual permission settings for the Assistant (Settings) → Annexes → Google → Permits → Special access → Gesture management).
• 🔇 Does not work in Do Not Disturb or with the microphone turned off.

Power buttons + Volume Down|Three-finger gesture|Voice command|Party of annex-->

Method 4: Screenshot applications (if standard methods don't work)

If the built-in features of Redmi 5 refuse to work (for example, due to a firmware failure or physical breakage of buttons), third-party utilities will come to the rescue. MIUI:

⚠️ Note: When installing third-party apps for screenshots, Xiaomi Redmi 5 may issue a warning, “The app is trying to grab the screen.” This is normal – just confirm permission in Settings → Special permits → Screen recording.

Instructions for setting up Screenshot Easy:

1. Download the app from Google Play.
2. Launch it and give access to Screen Storage and Recording.
3. Turn on the floating button in the utility settings.
4. Press the button to take a screenshot.

💡

If the app doesn't see permission to record the screen, reboot the phone and try again. Sometimes MIUI resets the permissions after updates.

Method 5: Screenshot via ADB (for advanced users)

If none of these methods worked, you can take a command-line screenshot using the ADB (Android Debug Bridge), which is true, for example, if the Redmi 5 screen crashed, but the phone still works.

What you need:

• 🖥️ Computer with installed ADB-driver.
• 🔌 USB-cable (preferably original).
• 📱 Included Debugging by USB on the phone (Settings) → The phone. → Version. MIUI — Press 7 times, then return to Additional → For developers).

Step-by-step:

1. Connect Redmi 5 to your PC via USB.


2. Open the command line (Windows) or the terminal (Mac/Linux).




Enter:




adb devices




(Your phone should be displayed)




4. Follow the command:




adb shell screencap -p /sdcard/screen.png




5. Copy the screenshot on PC:




adb pull /sdcard/screen.png C:\Screenshots\

⚠️ Note: This method does not work if the phone is enabled screen lock (PIN, First, unlock the device or use scrcpy for remote control.

What to do if screenshots are not saved

The problem of a screenshot being “made but not saved” is typical of a Redmi 5 with worn memory or after a firmware failure. Here are 5 ways to solve it:

• 🗃️ Check the space available: The internal drive should have a minimum of 100-200 MB. Delete unnecessary files or transfer them to the storage device. SD-map.
• 🔄 Reboot your phone: Sometimes MIUI «forgets" path of saving screenshots. reboot will reset cache.
• 📂 Reset Gallery Settings: Go to Settings → Annexes → gallery → Warehouse → Clear the data.
• 🛠️ Update the firmware: MIUI 9.6.3.0 and below were bugs with screenshots. Update via Settings → Updating the system.
• 📱 Check access rights: If you use a file manager, give it permission to write to Settings → Permits → Memory.

If nothing helps, try an alternative way to save:

1. Install FX File Explorer or Solid Explorer.
2. Create a Pictures/Screenshots folder.
3. Reboot your phone and try again to take a screenshot.

💡

On Redmi 5, screenshots are saved by default in PNG format at screen resolution (720×1280 for the standard model and 1080×2160 for the Redmi 5 Plus). If files "disappear", check the.thumbnails folder - sometimes thumbnails are saved there by mistake.

FAQ: Frequent questions about screenshots on Xiaomi Redmi 5