How to take a screenshot on Xiaomi Mi 10: all the ways (including hidden)

Xiaomi Mi 10 It is still one of the most popular flagships of the brand, despite the release of new models. AMOLED-resolution-screen 2340×1080 frequency 90 Hz is a perfect color renderer -- and sometimes you just have to save what's on the display. But how do you take a screenshot if the buttons don't respond or you need to grab a long page? In this article, we'll look at all the ways you can do that, from the standard to the little-known.

Many users mistakenly think that the Mi 10 screenshot is only a combination of buttons. In fact, MIUI 12/13/14 has at least 5 alternative methods — including gestures, voice commands and even automatic scrolling screenshots — we tested each of them on firmware V12.5.3.0.RJBCNXM (global) and V14.0.4.0.TJBCNXM (Chinese) to ensure performance.

Important: Some features may be missing if you use custom firmware or a heavily stripped-down version of MIUI (for example, for the European market).In this case, check for updates in Settings → About Phone → System Update.

1. Standard method: power buttons + volume

This is the most reliable method that works on any version of MIUI, even when there is a system failure.

1. Open on the screen what you want to save (web page, message, map, etc.).
2. Press the power button (right) and the volume button (left) at the same time.
3. Hold them for 1-2 seconds until you hear the sound of the camera shutter and see the animation of the screenshot.

⚠️ Warning: If you press the buttons longer than 3 seconds, a hard reboot will work, and it won't hurt the phone, but it will interrupt the current process.

Where to look for the screenshot taken?

• 📁 Screenshots folder in the gallery (Files) → Images → Screenshots).
• 🔍 Quick access: swipe down the notification panel and tap the screenshot thumbnail.
• 🌐 Cloud: If you enable sync with Mi Cloud, screenshots are automatically uploaded to the Mi Cloud section → gallery → Screenshots.

💡

If the power button is broken, use the virtual keys in Settings → Special features → System control → Power button. There you can turn on the display button on the screen.

2. Three finger gesture (the fastest way)

The Three-Finger Screenshot feature was introduced in MIUI 10 and has since become a favorite method for many users, allowing them to take a screenshot in one motion without pressing a button.

How to turn on:

1. Go to Settings → Additional settings → Buttons and gestures → Screenshot gestures.
2. Activate the screenshot switch with three fingers.
3. (Optional) Enable Preview to edit the screenshot immediately.

How to use:

• 👆 Place three fingers on the screen (no matter where).
• 👇 Swipe down a quick move (like a swipe to close an application).
• 🎯 Screenshot saved, and at the top of the screen will appear the dashboard for editing.

⚠️ Warning: If the gesture doesn't work, check if it conflicts with other features (such as Navigation Gestures or One-Hand Mode). → Display.

3. Screenshot via notification panel

If you're uncomfortable remembering button combinations or gestures, you can take a screenshot through the Quick Settings Panel, which is especially useful when one of the physical buttons is not working.

Instructions:

1. Swipe down from the top edge of the screen to open the notification bar.
2. Swipe down again to turn the full panel around.
3. Find the screenshot icon (usually a scissors icon or a framed camera icon) if it's not there, tap the icon. ⚙️ Edit and add it manually.
4. Slip the icon – the screenshot will be taken instantly.

Advantages of the method:

• ⚡ It works even with a locked screen (if the option is enabled in the security settings).
• 🔄 You can take a screenshot of any screen, including games and videos (where buttons may not work).
• 📱 No need to remember combinations – just one tapa.

4. Voice assistant Google or Xiao AI

If your hands are busy or your phone buttons are faulty, you can take a voice screenshot, either with built-in Xiao AI (for Chinese firmware) or Google Assistant (for global version).

Method 1: Google Assistant

• 🎤 Say OK, Google or hold the Home button (if you have one).
• 🗣️ Dictate the command: Take a screenshot or take a screenshot.
• ✅ Screenshot saved in Screenshots folder.

Method 2: Xiao AI (Chinese MIUI only)

• 🔊 Hold the power button (or tell them to ).
• 🗣️ Say it in Chinese: (jiétú — «screenshot»).
• 📸 Xiao AI confirm the team and take a picture.

⚠️ Note: Voice commands may not work if:

• 🔇 The microphone for the assistant is turned off in Settings → Annexes → Permits.
• 🌐 No Internet connection (Google Assistant requires a network to handle commands).
• 🔄 Do not disturb or save charge mode is enabled.

5. Scrolling screenshot (long page)

If you want to save an entire web page, a correspondence in a messenger or a long document, a regular screenshot will not work. MIUI has a Scrolling Screenshot function (aka Scrolling Screenshot), which automatically glues several frames into one long shot.

How to do this:

1. Take a regular screenshot of any of the above methods.
2. Immediately after the miniature appears in the lower right corner, tap it.
3. In the editor that opens, select the Scrolling icon (or Long Screenshot).
4. Wait for the phone to automatically scroll down the page and take additional pictures.
5. Press Ready to save the result.

It doesn't work in all apps! For example, on Instagram or TikTok, it can be blocked due to platform restrictions. Web pages in Chrome and texts in Telegram are best glued together.

Open the desired page or chat|Make sure the content is fully loaded|Disable traffic savings (if the internet is slow)|Do not scroll manually during capture|Check that the editor has a "scroll" button"-->

6. Screenshot via ADB (for advanced users)

If all standard methods do not work (for example, due to a system failure or a damaged screen), you can take a screenshot through the ADB command line. This method requires connecting the phone to the computer, but is guaranteed to work even on a locked device.

What you need:

• 🖥️ Computer with Windows/Mac/Linux.
• 🔌 Cable USB Type-C (original so that there are no connection problems).
• 🛠️ Installed Xiaomi drivers and package ADB Tools.

Instructions:

1. Turn on Developer Mode: Go to Settings → About Phone. Tap 7 times on MIUI Version. Go back to Settings → Additional → Developer. Activate USB Debugging.
2. Connect your phone to your computer and confirm your trust in the device.
3. Open the command line (Win + R → cmd) and type: Adb devices Make sure your Mi 10 appears in the list.
4. Take a screenshot by command: adb exec-out screencap -p > screenshot.png The file will be saved in the folder where the command was launched.

⚠️ Warning: If the phone screen is damaged and does not respond to touch, but the image is visible, this method is the only way to get a screenshot without disassembling the device.

💡

ADB-A screenshot is the only way to save the screen if the sensor is not working and the buttons are broken. USB!

FAQ: Frequent questions about screenshots on Xiaomi Mi 10