Xiaomi Redmi Note 8T — One of the most popular budget smartphones with a great camera for its price range, its 48-megapixel core module and advanced software allow you to take high-quality serial shots, but many users do not know how to unleash the full potential of this feature. In this article, we will discuss in detail how to activate and configure serial shooting, which modes to use for different scenes, and also give practical tips for processing the received frames.
Serial photography (or burst mode) is essential when you want to capture fast-moving objects, such as children, animals, sports events, or even falling objects. Unlike single shots, this mode takes several photos in a row at a minimum interval, increasing the chances of getting the perfect shot, but to achieve the result, it is important to properly adjust the camera and understand its limitations.
What is a serial shooting and why it is needed
Serial shooting is a mode in which the camera takes several photos per second (usually 5 to 30 frames, depending on the smartphone model). 8T This mode is implemented programmatically: the smartphone captures the sequence of images, and the user then chooses the best.
The main advantages of serial shooting:
- 🏃♂️ Motion capture: ideal for shooting sports, dancing or active games.
- 🐕 Catching moments: animals and children rarely pose - the serial mode increases the chances of catching a successful shot.
- 🎭 Experiments with composition: you can choose a frame with the best facial expressions, pose or lighting.
- 📸 HDR-Effect: Some smartphones combine frames from the series to improve dynamic range.
However, the mode has its drawbacks: Serial shots take up a lot of memory space (especially in high resolution), and in low light, quality can deteriorate due to noise, and not all scenes require this approach, since a single shot is enough for static objects.
How to Enable Serial Shooting on Redmi Note 8T
On the Redmi Note. 8T The serial is activated in two ways: through the standard Camera app or by gesture. Here's a step-by-step guide for both methods:
Method 1: through the shutter button
This is the simplest and most intuitive method:
- Open the Camera app.
- Switch to Photo Mode (if you are in another mode, such as Video or Portrait).
- Hold the shutter button (the round icon at the bottom of the screen) for 1-2 seconds. the smartphone will start taking pictures in serial mode.
- Release the button to stop the shooting.
Method 2: Using the "Space button" gesture
This method is useful if you hold your smartphone in one hand:
- Go to Settings. → Additionally. → Volume buttons.
- Activate the Camera option.
- Now, to take a serial shot, double-press the volume button (even if the screen is locked).
Make sure that the smartphone has enough free memory (minimum 1-2 GB)
Turn off battery saving for Camera app
Clean the lens of fingerprints and dust
Charge the battery to at least 30%-->
After the series of photos are taken, they will be saved in the gallery as a single file (in.jpg format marked "Series"). To view all the frames, open the image and tap it, a slider will appear to select the best picture.
Camera settings for better serial shooting
Default Redmi Note 8T It's a 12 MP serial shot, but for some scenes, it's better to change the settings:
| Parameter | Recommended value | Explanation |
|---|---|---|
| Permission | 12 MP (4:3) | The optimal balance between quality and speed of shooting. 48 MP mode slows down the serial shooting. |
| Focusing | Continuous Autofocus (AF-C) | Allows the camera to constantly adjust to a moving object. |
| White balance | Car or daylight | With artificial lighting, it is better to choose a manual mode (incandescent lamp, luminescent). |
| Exposition | +0.3. +0.7 EV | Slightly increased exposure will help to avoid dark frames when moving quickly. |
| Stabilization | On. | Reduces blur, but can slightly trim the edges of the frame. |
To change these parameters:
- Open the camera and tap the icon. ⚙️ Settings in upper right corner.
- Select Resolution, Focus and other options.
- For quick access to exposure and white balance, swipe your finger up or down the screen (a scale will appear).
💡
If you're shooting in low light, turn on Night Before the burst activation mode, which will reduce noise on the footage, but reduce the shooting speed to 3-5 frames per second.
Shooting speed and limitations of Redmi Note 8T
Redmi Note 8T It's not a flagship, so its production capabilities are limited by hardware:
- 📸 Maximum speed: up to 10 frames per second in 12 MP mode (in good lighting).
- 🔋 Frame limit: about 20-30 shots per series (depends on free memory).
- ⏱️ Latency between series: 2-3 seconds (processing and saving time).
- 🌓 Poor lighting: speed drops to 3-5 fps, noise increases.
Critical feature of the Redmi Note 8T: When you shoot at 48 MP, the serial mode turns off automatically. The smartphone just takes single shots with a delay. So for serial shooting, always choose 12 MP.
Also, it is worth considering that with prolonged retention of the down button, the smartphone can overheat, which leads to a forced decrease in performance. If the case becomes hot, take a break for 1-2 minutes.
What to do if the serial shooting lag?
Practical tips for perfect serial shots
Even with the right settings, the result depends on the technique of shooting. 8T:
1. Composition and focus
- 🎯 Pre-focus: point the camera at the object and hold your finger on the screen to block the focus (it will appear to read: AE/AF Then start shooting.
- 🖼️ Rule of thirds: Enable the grid in the camera settings (Settings) → Grid) and place the object at the intersection of lines.
- 🔄 Camera movement: if the object moves horizontally, rotate the smartphone next (the technique of "sled frame").
Lighting and stabilization
- ☀️ Natural light: shooting outside in cloudy weather gives softer shadows than in direct sunlight.
- 💡 Artificial lighting: avoid mixing different sources (e.g. incandescent lamps and light bulbs) LED).
- 📱 Stabilization: when shooting with hands, press your elbows to the torso or use improvised supports (walls, tables).
3. Choosing the best frame
After the shooting:
- Open the series in the gallery and tap the thumbnail.
- Scroll through the footage while holding your finger on the screen.
- Click Select to save the best pictures (they are copied to a separate folder).
- Remove unnecessary series to make room.
💡
To capture fast objects (such as a flying ball), start the series in 1-2 seconds before the key moment, which will increase the chances of catching the peak phase of movement.
Processing serial photos: applications and life hacks
Even perfectly shot serials often require some work. Here are the best tools and techniques for the Redmi Note. 8T:
1. Built-in tools MIUI
Xiaomi Gallery has basic features for working with series:
- 🔍 Viewing the frames: tap on the series → swipe left/right.
- ✂️ Pruning: Select a frame → Edit → Cut off.
- 🎨 Correction: Automatic Improvement (Edit) → Improve).
Third-party annexes
| Annex | Functions | Reference |
|---|---|---|
| Google Photo | Automatic creation of animations from series, cloud storage, search by objects. | Play Market |
| Snapseed | Accurate correction of exposure, color, adding effects (for example, background blur). | Play Market |
| Adobe Lightroom | Professional color correction, presets, noise removal. | Play Market |
3. Life hacks for processing
- 🌟 Creation GIF: In Google Photos, select a series → Create → Animation.
- 🖌️ Removing Excess Objects: Use Healing Tool for Retouching in Snapseed.
- 📊 Package processing: In Lightroom, apply the settings to one frame, then copy them to the rest (Copy the settings).
💡
If you're shooting a series to create a collage, choose frames with the same background, which will make it easier to combine them in graphic editors.
Common Mistakes and How to Avoid Them
Many users of the Redmi Note 8T They're facing typical serial problems, and here's how to prevent them:
⚠️ Attention: If the serial images are blurry, check if the Macro mode is on, which narrows the depth of field and is not suitable for moving objects.
- 📉 Too dark pictures: increase the exposure to +0.7–1.0 EV or take it off in mode. HDR (But it'll slow down the speed of the shooting).
- 🔄 Missed moment: start shooting in advance – Redmi Note 8T There is a delay between pressing the button and the first frame (~0.3 s).
- 🗑️ You're out of memory, you delete the files you don't need before you shoot them, or you transfer them to a memory card. You take a 30-frame series. ~100–150 MB.
- 🔋 Battery discharge: Serial shooting is actively using the processor. Charge your smartphone to 50% or connect powerbank.
⚠️ Note: When shooting in format RAW The serial mode is shutting down.Redmi Note 8T does not support simultaneous recording in RAW+JPEG.
If the smartphone is constantly "braking" when shooting, try resetting the camera settings to factory (Settings) → Camera. → Resetting settings. This will help if the problem is caused by incorrect parameters.