How to connect a monopod Xiaomi to a Samsung phone: all the ways and nuances

Xiaomi monopods are popular accessories for taking selfies, videos and streams, but connecting them to smartphones from other brands, such as Samsung, often raises questions. Despite the fact that both devices run on Android, differences in firmware, Bluetooth versions and proprietary protocols can be difficult. In this article, we will examine all possible ways of connecting, from standard Bluetooth connection to the use of adapters, and also consider typical errors and their solutions.

It’s important to understand that Xiaomi monopods (such as Mi Selfie Stick or Xiaomi Mijia Bluetooth Selfie Stick) are initially optimized for their own brand, but with the right approach, they can be made to work with the Galaxy S23, A54 or other Samsung models, the main thing is to take into account the Bluetooth version (starting with 4.0), the availability of HID profile support (for the down button), and possible manufacturer limitations.

1. Compatibility of Xiaomi monopods with Samsung phones

Before you start connecting, check if your devices are compatible.Most Xiaomi monopods support Bluetooth 4.0 and higher, but there are nuances:

• 📱 Samsung models: all smartphones starting with the Galaxy S6 (2015 and later have Bluetooth 4.2+. Older devices (such as the Galaxy) S5) may not support the profile HID, trigger-button.
• 🎥 Monopod models: Xiaomi Mi Selfie Stick (1st generation) - Bluetooth 3.0 (problems with the new Samsung). Xiaomi Mijia Bluetooth Selfie Stick (2nd generation) - Bluetooth 4.0, compatible with most Samsung. Xiaomi Mi Selfie Stick Tripod - Bluetooth 5.0, supports HID and A2DP.
• ⚠️ Restriction: Some Samsung models (such as the Galaxy J series or Galaxy A 2016-2018) may block third-party accessory connection due to security policies.

If your monopod is older than 2018 and your phone is newer than 2020, there is a risk of incompatibility, which would require a 3.5mm USB-C adapter (for wired connectivity) or alternative methods, which will be discussed later.

2. Connecting Xiaomi monopod to Samsung over Bluetooth

The most common way is wireless, and the instructions are relevant for most models, but may vary depending on the version of Android and the One UI shell.

1. Turn on Bluetooth on your phone: Go to Settings → Connections → Bluetooth and activate the switch. Make sure Visibility is on (some Samsung models call it Detection).
2. Activate monopods: Press and hold the power button on the monopod for 3-5 seconds until the indicator flashes blue and red (mating mode).
3. Find the device in the list: In the Bluetooth menu on the phone will appear a device called MI Selfie, Xiaomi_BLE You can press it. ⚠️ Note: If the device is not displayed, try rebooting the phone's Bluetooth module (turn it off/on) or reset the monopod settings (press the power button on the phone's 10 seconds).
4. Confirm mating: A request for code confirmation (usually 0000 or 1234) may appear on the phone screen. Enter it and click Connect.

Once successfully connected, the monopod indicator will turn blue (or green on some models). Now the trigger button should work in the standard camera application. If the button does not respond, check the application settings (resolutions for Bluetooth devices).

3. Wired connection via 3.5 mm or USB-C

If Bluetooth is not working or the monopod is too old, you can use a wired connection.

• 🔌 3.5 mm adapter → USB-C (If the phone does not have a headphone jack).
• 🎧 A monopod cable (usually a micro-USB or a micro-USB cable) USB-C on the monopod side, 3.5 mm on the phone side).

Step-by-step:

1. Connect the monopod cable to the adapter (if needed) and insert it into the phone.
2. Open the Camera app on Samsung.
3. Press the downhill button on the monopod – it should work like a hardware shooting button.

The advantage of this method is zero latency and no compatibility problems, but there are also disadvantages:

• ⚠️ The cable may interfere with the shooting.
• ⚠️ Not all adapters support button transmission (supported adapter is needed). CTIA/OMTP).

4. Solving Connection Problems

If the monopod does not connect or the button does not work, use this table for diagnosis:

A critical feature: on some Samsung models (such as the Galaxy S22 Ultra), the built-in Camera app blocks external Bluetooth devices by default, in which case installing an alternative application, such as Google Camera or Footage, where monopod support is implemented better, will help.

💡

If the monopod connects but the button doesn’t work, try turning off Bluetooth power saving mode in your phone settings (Settings → Device Service → Battery → Energy Saving).

5. Alternative ways of connecting

If standard methods don’t work, try these options:

• 📱 Use a remote app: Install a Xiaomi Home or Mi Remote phone. Some monopods (e.g. Mi Selfie Stick Tripod) support control through these apps, even if standard mating doesn't work.
• 🔄 Monopod firmware update: For Bluetooth 5.0 models (such as Mi Selfie Stick Tripod) it sometimes helps to update your firmware via PC. Official instructions are available on Xiaomi's website in the support section.
• 🔌 USB-OTG Adapter: If the monopod has a USB-The connector can be connected through USB-OTG However, this method does not work on all Samsung models (support required) USB Host Mode).

For Galaxy S21/S22/S23 owners, there is another lifehack: turn on Developer Mode (Settings → About Phone → Build Number – press 7 times) and activate the Bluetooth Debugging option, which sometimes helps to unlock support for external devices.

💡

If neither method worked, check the monopod on another device (e.g., a Xiaomi phone) and if the problem persists, the monopod itself is defective.

6. Setup of the camera to work with the monopod

Even after a successful connection, you may have some nuances with the setup of the shooting.

• 📸 Application permissions: Make sure the Camera app has access to Bluetooth and Microphone (for some monopods with built-in microphone).
• ⚙️ Shooting settings: Manually (Pro) turn off the auto-start timer – it may conflict with the monopod button.
• 🔊 Sound signals: If the monopod squeaks when pressed, but shooting does not begin, check whether the No Sound or Do Not Disturb mode is on.

For video shooting from a monopod, it is recommended:

• Use 1080p resolution at 30 FPS (for stability)
• Disable stabilization in the camera application (it is better to provide it physically, keeping the monopods evenly).
• Enable the grid (Camera Settings → Grid) for the correct composition.

7.A review of the best Xiaomi monopods for Samsung

If you haven’t bought a monopod yet and want to choose a model with maximum compatibility, pay attention to these options:

For Samsung owners, the best choice would be the Xiaomi Mi Selfie Stick Tripod - it supports all modern protocols and has minimal compatibility issues. If you want a budget option, look for the Mijia 2nd generation, but be prepared for the possible difficulties with connecting on older phone models.

Frequently asked questions