How to disable Xiaomi Monopod: Instructions for All Models (2026)

Xiaomi monopods are popular accessories for selfies, blogging and content creation, but even with them sometimes there are difficulties. One of the most common problems: the device does not disconnect from the smartphone, continues to drain the battery or gives out connection errors. In this article, we will discuss how to properly disable the Xiaomi monopod from the phone, what nuances are in different models (from Mi Selfie Stick to Xiaomi Smart Tripod), and what to do if standard methods do not work.

It is important to understand that the process of disconnection depends on the type of connection: via Bluetooth, via a 3.5 mm cable (for older models) or by the same. USB-C (We'll look at all the options and also tell you how to avoid common mistakes, such as why a monopod can remain on the list of connected devices even after a connection breaks.

If you're faced with a monopod that doesn't turn off, a flashing indicator or a smartphone that doesn't see it again, there are solutions for these cases, and you'll also learn how to reset the monopod to factory settings if it freezes after updating the firmware.

1. How to disable Xiaomi monopods over Bluetooth

Most modern Xiaomi monopods (such as Mi Selfie Stick Bluetooth or Xiaomi Mijia Tripod) connect to a smartphone via Bluetooth. You can turn them off in the standard way through the phone's settings, but there are nuances that many people are not aware of.

To break the connection:

1. Open the settings on your smartphone.
2. Go to the Bluetooth section.
3. Find your monopod (usually called your monopod) in the list of devices. MI_Selfie, Xiaomi_Tripod or similarly).
4. Press the gear icon (⚙️) Next to the name and select Disable or Forget the device.

If the monopod does not turn off through the menu, try:

• 🔄 Reboot Bluetooth Module: Turn off and turn on Bluetooth again in the notification curtain.
• 📱 Reboot your smartphone: Sometimes system errors block the correct shutdown.
• 🔋 Remove the battery from the monopod (if the model is collapsible): this will forcibly reset the connection.

💡

If the Xiaomi monopod automatically reconnects after shutdown, check the auto-connection settings in your smartphone’s Bluetooth menu. Some models (such as the Redmi Note 12) have an “Automatic Connection” option to turn it off.

Note: some monopods (for example, Xiaomi Smart Tripod Pro) have dual connection – Bluetooth for control and control. USB-C In this case, you need to turn off both connections.

2. disabling the monopod with cable connection (3.5 mm or) USB-C)

Older Xiaomi monopod models (e.g. Mi Selfie Stick) 1st Gen) connect to the smartphone via a 3.5 mm connector (audio connector) or Micro-USB. Their shutdown is reduced to the physical extraction of the cable, but there are pitfalls here too.

If the monopod continues to work after the cable is removed (for example, a light flashes or sounds are made), then it has remained in standby mode, to turn it off completely:

• 🔌 Remove the cable from your smartphone.
• 🔘 Press the power button on the monopod for 5-10 seconds (before the indicator is turned off).
• 🔋 Wait for full discharge (if the indicator does not go out): some models automatically turn off when the battery is discharged.

For monopods with USB-C (For example, Xiaomi Mijia Tripod 2, the process is similar, but there is a risk that the smartphone will continue to supply power to the port:

1. Turn off the cable.
2. Go to Settings. → Battery → Optimizing consumption.
3. Find the monopods in the list and turn off background activity for it.

Important: if the monopod is connected to USB-C and simultaneously charges your smartphone, disable the option Reverse Charging in the battery settings, otherwise the device will remain active even after a physical disconnect.

3.Why Xiaomi Monopod doesn't shut down: Common Mistakes

Sometimes, Xiaomi monopods can hang in the connected state, despite all attempts to disable it.

If none of these methods worked, there may be a problem with the firmware of the monopod. Some models (e.g. Xiaomi Mijia Tripod Pro) require an update through the official Mi Home app. → Settings → Firmware update.

Critical information: If the Xiaomi Smart Tripod monopod continues to emit audible signals after the shutdown, this may indicate a malfunction of the controller.

4.How to Reset Xiaomi Monopods to Factory Settings

If the Xiaomi monopod is not working properly (it does not turn off, does not connect, the indicator flashes), a complete reset may be required.

For most Bluetooth monopods (e.g. Mi Selfie Stick):

1. Turn on the monopod (the indicator should flash blue).
2. Press the power button for 10-15 seconds until the indicator flashes red.
3. Release the button - the monopod will reset and reboot.

For monopods with USB-C (For example, Xiaomi Mijia Tripod 2):

1. Connect the monopod to the charger.
2. Press the power button and the down button for 5 seconds at the same time.
3. After reset, the indicator flashes green.

If the reset didn’t help, try updating the firmware through the Mi Home app:

• 📱 Open Mi Home and find your monopod in the list of devices.
• 🔄 Go to the Device Settings → Firmware update.
• 📥 If a new version is available, install it.

Make sure the monopod is 30% or more charged.|

Turn it off the smartphone.|

Prepare a paper clip for reset (if there is a hidden button)|

Check the instructions for your model (on the box or in the Mi Home)-->

Once reset, Xiaomi's monopod will be like new, it'll have to be reconnected to the smartphone. If that doesn't solve the problem, the Bluetooth module or power controller may be faulty, in which case you should contact the service center.

5. disabling monopod on different models of Xiaomi smartphones

The process of disabling the monopod may differ depending on the smartphone model and version. MIUI. Let’s look at the features of popular devices:

Xiaomi Redmi Note 11/12/13 and POCO X5:

• 📱 Open the Settings. → Bluetooth.
• 🔍 Find the monopod in the list and click on it.
• 🚫 Select Forget the Device (not just Disable!).
• 🔄 Reboot Bluetooth in the notification curtain.

Xiaomi. 13/14 s MIUI 14+:

• 🔧 Go to Settings. → Connections and sharing → Bluetooth.
• 📌 Click on the pencil icon (✏️) monopod.
• 🗑️ Select Remove (this will completely remove the device from the smartphone memory).

On older models (e.g. Redmi 9 or Mi) A3):

• 🔄 You may need to clean up your Bluetooth cache (Settings) → Annexes → Show it all. → Bluetooth → Clear the cache).
• 🔋 If the monopod is connected by 3.5 mm, check if the audio mode is not enabled in the sound settings.

💡

On smartphones with MIUI 12 and older Xiaomi monopods can automatically connect via the Quick Pair feature. To disable it, go to Settings → Bluetooth → Additionally. → Quick pairing and deactivate the option.

If you use a monopod from your iPhone, the disabling process is standard (via Settings). → Bluetooth, but some features (such as zoom or camera switching) may not work. For full compatibility, it is recommended to use monopods with Bluetooth 5.0 and higher.

6.How to extend the life of a Xiaomi monopod: tips for using

To make Xiaomi monopod last longer and not have problems with disconnection, follow these recommendations:

• 🔋 Discharge and charge regularly: if the monopod is long without use, its battery may fail. Every 2-3 months completely discharge and charge it.
• 🧹 Clean the contacts, dust and moisture can disrupt the connection. USB-C or 3.5 mm dry napkin.
• 📵 Disable after use: Do not leave the monopod connected to the smartphone in the background – this discharges both devices.
• 🔄 Update your firmware: check for updates in the Mi Home app every six months.

Avoid:

• ❌ Sharp jerks during shooting - this can damage the addition mechanism.
• ❌ Uses at extreme temperatures (below) -10°C or higher +40°C).
• ❌ Connecting to uncertified charging – this can knock out the power controller.

💡

If you travel frequently, bring a spare cable. USB-C Original Xiaomi cables often break at the bending point, and universal cables may not support fast charging.

If the monopod starts to hold the charge worse, try calibrating the battery:

1. Completely discharge the monopod (before switching off).
2. Charge it 100% without interruptions.
3. Repeat the cycle 2-3 times.

7. Alternative ways to disconnect (if nothing helps)

If the Xiaomi monopod does not turn off standard methods, you can try alternative solutions:

Method 1: Forced shutdown through ADB

For experienced users:

1. Enable Developer Mode on your smartphone (Settings) → The phone. → Version. MIUI — press 7 times).
2. Activate USB Debugging in Settings → Additional → For developers.
3. Connect your smartphone to your PC and execute the command: adb shell am start -a android.bluetooth.adapter.action.REQUEST_DISCOVERABLE
4. Then type: adb shell pm clear com.android.bluetooth (this will reset all Bluetooth connections).

Method 2: Using Third-Party Applications

Apps like Bluetooth Auto Connect or BTool allow you to force you to break the connection, but be careful, they require root rights or ADB.

Method 3: Hardware reset

If the monopod does not respond to the buttons, try:

• 🔧 Disassemble the case (if the model is collapsible) and remove the battery for 1-2 minutes.
• 🔌 Connect to charging for 10-15 minutes – sometimes it will wake up the controller.

⚠️ Attention: use ADB or disassembling the monopod can lead to a loss of warranty. Use these methods only if other methods have not worked.

FAQ: Frequent questions about disabling Xiaomi monopod