How to set up a Xiaomi Mi camera 10T Pro: From basic parameters to hidden functions

Introduction: Why the Mi camera 10T Pro requires fine-tuning

Smartphone Xiaomi Mi 10T Pro is equipped with a flagship camera on 108 MP with Leica optics (in some regions), but even this hardware does not guarantee perfect shots without the right configuration. The manufacturer by default activates universal profiles designed for the “average” user – which means that the potential of the device is used only on the device. 60-70%. For example, automatic noise reduction algorithms often “smooth” textures, and white balance in artificially lit rooms is prone to cold shades.

In this article, we will not only discuss the obvious settings like HDR It's not like night mode, but also hidden settings that Xiaomi doesn't advertise, and you'll learn how to calibrate autofocus for macro photography, why 108 MP resolution isn't always warranted, and how to get around the limitations of a standard camera app with GCam. Particular attention will be paid to settings for specific scenarios: portrait shooting in low light, video in the 8K, And even astrophotography (yes, Mi). 10T Pro is capable of it!).

Before you start, check the firmware version: some features (e.g., Dynamic Range Pro) only appeared in the MIUI 13+. Update the device through Settings → The phone. → Update the system if you are using the old version.

Basic settings: what to change first

Start by optimizing the parameters that affect 90 percent of your images. Open the Camera app, tap the gear in the upper right corner, and go to the camera settings.

• 📸 Photo resolution: by default is 9 into 1 (9 pixels are combined into 1 For most tasks, this is enough, but if you want the most detailed images for printing or cropping, choose 108 MP (full) Note that the files will weigh 20-30 MB!
• 🌓 White balance: Automated mode often fails in warm-light environments. Try manually adjusting to 3200K–4000K filament lamp.
• 🔄 Save settings: Turn on the option Save mode settings so you don’t reset everything every time you start.
• 📱 Activate Double Pressing the Power button for a quick start of the camera – this will save precious seconds when shooting spontaneously.

If you post a photo on social media, turn it off, it spoils the composition and gives an amateur level. For professional tasks, it is better to add watermarks later in Lightroom or Snapseed.

⚠️ Note: When shooting in 108 MP format, it is turned off HDR Night mode: if the light is complex (contrast shadows) + bright highlights, it is better to remove in 12 MP with HDR, Then increase the software permission.

Update the Camera app to the latest version|

Select the optimal resolution (12 MP for social networks, 108 MP for printing)|

Turn off the watermark|

Adjust white balance for current lighting|

Activate saving mode settings

-->

Professional Mode: Manual Customization for the Perfect Frame

Pro mode in Mi 10T Pro allows you to control exposure, ISO, Focus and white balance -- but most users don't use it because of complexity. In fact, you just need to remember 3 key rules:

1. Extract: For static objects (landscapes, architecture) use values 1/100–1/500. For motion photography (water, people) — 1/1000 shorter.
2. ISO: range up 100–800. Exceeding 1600 It causes a lot of noise, even with nighttime.
3. Focus: Manually adjust it for macro (0.5–1 m) or portraits (1.5–2 m) Autofocus often misses in low light.

Example of settings for a portrait at sunset:

• Excerpt: 1/250
• ISO: 400
• White balance: 5000K (or "Cloud")
• Focus: manual adjustment to the model's eyes

For the starry sky (yes, Mi) 10T Pro is capable of doing that:

Exposure: 30 seconds


ISO: 3200




Focus: ∞ (infinity)




Format: RAW (for post-processing)




Stabilization: Disable (use a tripod!)

⚠️ Attention: When shooting in RAW Files take up to 50MB and take up extra processing time. Use this format only if you plan to edit your photos in Lightroom or Darktable.

Night mode and shooting in low light: secrets of quality

Mi 10T The Pro is one of the best night modes in its class, but it doesn't work magically -- it requires the right approach. 1/4 And the result is blurry footage, even with OIS (optical stabilization).

Follow this algorithm for perfect night shots:

For portrait photography in dark interiors, use an external light source (such as an annular lamp) and set the camera up as follows:

• 🔦 Night mode: off (it blurs facial details)
• 📷 Mode: Portrait with background blur
• ⚡ ISO: 800–1200
• ⏱ Excerpt: 1/100 (to avoid the "wisps")

💡

If the night mode gives too "plastic" faces, try to shoot the frame in the usual mode with the camera. ISO 1600, and then process it in Snapseed with the Detail and Noise Cancel tool".

Videotape: 8K, stabilization and sound

Mi 10T Pro supports video in the video 8K@30fps, But it's a nuanced mode. One, autofocus is slower because of the huge data flow. ~600 MB/min, and the heating of the body reaches 45°C's already through. 5 minutes of recording. 8K Only for shorter rollers (up to) 2-3 minutes) or static scenes.

For most tasks, the optimal mode is 4K@60fps It's got Pro Stabilization enabled, and it gives you a smooth picture even when you're shooting it with your hand, and the files weigh in. 3 Settings for better quality:

• 🎥 Permission: 4K (3840×2160) upon 60 fps
• 🔊 Microphone: Enable Noise Reduction and Voice Amplification (in the sound settings)
• 📐 Grid: Activate the Rule of Thirds for the correct composition
• 🔄 Autofocus: Choose Continuous (CAF) dynamically

Slow-motion modes are available 960 fps (720p) and 240 fps (1080p). The first one is more dramatic, but the quality of the picture is affected, the second one is social. 1-2 You can use this to capture unexpected moments (e.g., a bursting ball) when you press a button).

⚠️ Note: When shooting a video in 4K@60fps with the enabled stabilization Pro, the edges of the frame are trimmed (~5%). If you are interested in the width of the field of view, use 4K@30fps Or disable advanced stabilization.

💡

For video durations longer 10 Always use an external battery for minutes. 4K/8K discharges 15-20% hourly, even 100% charge.

GCam and alternative firmware: how to squeeze the maximum

Xiaomi's standard camera app limits some features available at the iron level.For example, Astrophotography mode is officially unavailable, although Samsung's sensor is not available. HMX The solution is the installation of Google Camera (GCam) with modified configs.

The best versions of GCam for Mi 10T Pro (checked for MIUI 14):

• 📱 BSG GCam (v8.4) — Stable operation, support for all modules
• 🌌 Shamim GCam (v8.7) — better processing of night scenes
• 🎞 Wichaya GCam (v8.6) — optimized for video

After installing GCam, download the config for Mi 10T Pro (see the forums for information) 4PDA or XDA) And import it by double-pressing the black area next to the down button:

HDR+: Enabled (or HDR+ Enhanced for complex lighting)


Night mode: Auto (or Manual with a shutter speed of up to 4 seconds)




Awb: Manually set to 4000K for warm scenes




Sharpness: -1.0 (reduces excessive sharpness)




Noise Reduction: 0.8 (Noise and detail balance)

The advantages of GCam over stock camera:

⚠️ Note: Some versions of GCam can cause the processor to overheat during long shooting. CPU Monitor - if it exceeds 50°C, take a break.

Post-processing: how to save even unsuccessful staff

Even with the perfect camera settings 10-15% The pictures need to be reworked. 10T Pro best tools:

• 📱 Snapseed (free) - for quick exposure and color correction. Use Selective correction (for shadow lightening) and Detailing (for texture work) tools).
• 💻 Adobe Lightroom Mobile is for professional processing. Leica Classic or Fuji Provia presets go well with Mi color rendering. 10T Pro.
• 🎨 VSCO — For stylish filters. Try it. A6 or HB2 portrait.

Typical problems with photos with Mi 10T Pro and how to fix them:

1. Overlights: in Snapseed, use Curves (reduce the brightness in the lights on the 10-15%).
2. Noise: In Lightroom, apply Luminance at the level 30-40.
3. Unnatural colors: Reset the color settings and manually adjust the temperature (4000–5500K) and shade (+5 +10).
4. Blurred background: In Photoshop Express, use the Portait tool to enhance the bokeh effect.

For video, post-processing is even more important.

• 🎬 CapCut – for quick installation and color correction (free, there are templates for the TikTok/Reels).
• 💎 LumaFusion (paid) – for professional installation with support 4K.
• 🎵 Premiere Rush – if you want to sync your video with music.

💡

Save original images to the cloud (Google Photos, MI Cloud before processing. If you overdo it, you can always start over.

FAQ: Answers to Frequent Questions