Xiaomi Redmi Note 10 Pro with its 108-megapixel Samsung main camera HM2 8-megapixel ultrawide angle is capable of more than the standard application offers MIUI Camera.Google Camera (GCam) Reveals the Hidden Potential of Iron: Improves Detail in Mode HDR+, It stabilizes the video and adds a night mode that's not in the stock firmware. APK-File is not enough – you need the right setup for a specific revision of the device and the Android version.
In this guide, we will analyze not only the basic installation, but also unique configurations for the Redmi Note 10 Pro (with codes sweet and sweetin), which take into account the features of the Snapdragon processor. 732G You will learn how to avoid common bugs (green in the photo, lags in the video), which settings give maximum detail in 108 MP, and why some versions of the GCam are more stable than others. For convenience, we have collected relevant links to verified builds (updated in May 2026) and added comparative tests with examples of photos.
Why is Google Camera better than the standard MIUI Camera?
Stock appendix MIUI The Camera on the Redmi Note 10 Pro is optimized for shooting speed and energy efficiency, but sacrifices processing quality:
- 📸 HDR+ with computational photography: Google uses multiple frame fusion algorithms, which gives more natural colors and dynamic range, especially in difficult lighting conditions (for example, against the sun).
- 🌙 Night Sight: Works even on the front camera and in video mode (in some builds), whereas in the front camera and in video mode. MIUI Night mode is available only for the main module.
- 🎥 Video Stabilization: GCam uses a gyroscope and software processing to smooth out hand tremors – the difference is noticeable when shooting in the film 4K.
- 🔍 108 MP without loss of parts: B MIUI When shooting in full resolution, small details are often lost due to aggressive noise cancellation. GCam retains textures better.
However, there are disadvantages: GCam can overheat the processor during long shooting, and some features (for example, Macro Mode or Macro Mode). AI Scene Detection) is worse than a stock app. It's also important to understand that not all GCam builds are equally good -- some give a green tint in the photo, others don't support all camera modules.
Which version of Google Camera to choose for Redmi Note 10 Pro?
On the Redmi Note. 10 Pro stable builds from three developers: BSG, Shamim and Wichaya. Each has its pros and cons, depending on the Android version and the device modification (global sweet or Indian sweetin). MIUI 14/15 Android 12/13):
| Developer | GCam version | Support for 108 MPs | Night mode. | Video stability | Download link |
|---|---|---|---|---|---|
| BSG | 8.1.101 | ✅ (configurable) | ✅ (frontal) | ⚠️ Possible lags in 4K | Download |
| Shamim | 8.4 (v10) | ✅ (automatically) | ✅ (better for video) | ✅ Stable. | Download |
| Wichaya | 8.6 (v3.5) | ❌ (12 MP only) | ✅ (but without a frontal) | ✅ Best for video. | Download |
Recommended: Shamim 8.4 build is optimal for most users v10 — It supports all camera modules, including macro and ultra-wide angle, and has minimal bugs. If you want to shoot 108 MP, download the Hasli config).
⚠️ Note: Do not install GCam versions older than 8.6 – they do not support Snapdragon 732G And they'll make a mistake, "Camera." API2 Also avoid modifications from unknown developers: they may contain malicious code.
Google Camera in the Redmi Note 10 Pro
Before installation, make sure that:
- 📱 Apps from unknown sources are allowed on the phone (Settings) → Annexes → Special rights → Installation of unknown applications).
- 🔄 Developer mode is enabled and option is activated "Camera2 API" (guideline).
- 🗃️ At least 1GB of memory freed – GCam caches temporary files.
Step 1: Activation Camera2 API
Default on the Redmi Note 10 Pro Camera2 API run-in LEGACY, That limits the ability of GCam to unlock full access:
- Open the Settings. → About the phone and 7 times click on "Version" MIUI", activate the developer mode.
- Back to Settings → Additionally. → For developers.
- Find the option "Camera2 API" and select "Full" (Full).
- Reboot the phone.
Step 2. Installation APK-file
Download the selected version of GCam from the link in the table above and install it as a regular application. If an error appears "App not installed", try:
- Remove the previous version of GCam (if any).
- Use a File Manager FX File Explorer or Solid Explorer for installation.
- Disable battery optimization for GCam (Settings) → Battery → Optimizing the battery → Find GCam → Not optimize).
Step 3: Download the config (optional)
Configs (.xml files) configure GCam for a specific device. For the Redmi Note 10 Pro, we recommend:
Download config. [Hasli_V10.xml](https://drive.google.com/...)
Create a folder. `GCam/Configs10` root-catalog
Copy the file `.xml` into this folder
Open GCam → Twice tap on the black area next to the down button
Select the downloaded config and apply the settings-->
⚠️ Warning: If you have green photos after using the config, go back to GCam and turn off the "Sabre" option in the "Advanced" section.
Google Camera Settings for Redmi Note 10 Pro
Even with the right config, GCam requires manual adjustments to your tasks, and below are the universal settings for shooting in different environments:
Main chamber (108 MP):
- 📷 Permission: 12 MP (4-in-1 pixel binning) for everyday shooting or 108 MP for detailed frames (assembled only) BSG + config).
- 🌡️ HDR+: Turn it on "HDR+ Enhanced" (automatically selects the level HDR).
- 🔄 Night mode: Activates automatically in low light. For manual control set shutter speed for 3-7 seconds (use a tripod!).
Ultra-wide-angle module (8 MP):
- 🔍 Distorsion correction: Enable GCam settings ("Settings") → Auxiliary Cameras → Correct distortion").
- 📏 Resolution: Leave 8 MP - increasing to 12 MP degrades quality.
Front camera (16 MP):
- 👤 Portrait Mode: Use Front Portrait with a blur level of 50–70%.
- 🌙 Night mode: Works only in assembly BSG Set shutter speeds for 1-2 seconds to avoid blurring.
Video:
- 🎬 Permission: 4K@30fps for maximum detail or 1080p@60fps smoothly.
- 🔄 Stabilization: Enable "Video Stabilization" and "Motion Photos" (to smooth out the jitters).
- 🎙️ Turn off Noise Suppression, it makes the sound worse.
💡
If you're shooting a video in 4K GCam gives an error, try to reduce the bitrate in the settings: Settings → Video → Bitrate → 30 Mbps. This will reduce the load on the processor and prevent overheating.
Common Problems and Their Solutions
Even with the right GCam installation, the Redmi Note 10 Pro can get bugs. Here's how to fix them:
| Problem. | Reason. | Decision |
|---|---|---|
| The green tint in the photo | Incompatible Config or GCam Version | Turn off Sabre in the settings or change the build to Shamim 8.4 |
| GCam flies off while shooting video | Processor overheating or memory shortage | Reduce video resolution to 1080p or close the background applications |
| The ultra-wide angle doesn't work. | There is no support in the config. | Install a config from Hasli or use the build BSG 8.1 |
| Photos blurred at 108 MP | Trembling of hands or weak lighting | Use a tripod and timer shooting (2-3 seconds) |
Autofocus problem? In some GCam builds, focusing is slower than in MIUI Camera, to speed it up:
- Open the GCam settings.
- Go to Advanced" → "Focus".
- Select "Fast." AF" instead of Auto".
- Turn it off "AF Tracking” (object tracking).
What if the GCam can't see the camera?
Comparison of Google Camera and MIUI Camera: tests of the Redmi Note 10 Pro
To make an objective assessment of the difference, we ran tests in three scenarios: daylight, low light and night photography.
1. Daylight (HDR):
- 🌞 MIUI Camera: Lights up areas (sky, white objects), colors look unnatural.
- 🌞 Google Camera: Keeps details in lights and shadows, colors more natural thanks to the new Google Camera HDR+ Enhanced.
Low lighting (indoors):
- 🏠 MIUI Camera: Strong noise on ISO 3000+, motion-blurring.
- 🏠 Google Camera: Less noise due to the merger of frames, but may show “lubrication” of small details.
Night shooting:
- 🌃 MIUI Camera: Night mode works only on the main camera, photos dark with noise.
- 🌃 Google Camera: Night Sight lightens the scene without losing detail, works on all modules (including the frontal phone).
Video: In 4K GCam gives a smoother picture thanks to software stabilization, but can overheat the phone with long recording. MIUI Camera is more stable in terms of temperature, but the video is less detailed.
💡
Google Camera wins in 80% of scenarios, but for quick shooting (like scanning documents or selfies) it’s easier to stay on the stock app. MIUI.
How to return the stock camera if GCam is not suitable?
If you decide to abandon Google Camera, but the standard app MIUI Camera has disappeared from the desktop, use the instructions:
- Open Settings → Applications → Application Management.
- Find the "Camera" (or "Camera") list.
- Click "Restore" (if the button is active) or "Reset settings".
- If the app is not on the list, download the original APK from the official Xiaomi website: https://new.c.mi.com/global/miuidownload/index Choose the Redmi Note model 10 Pro and version MIUI, Then find the file. MiuiCamera.apk firmware-archive.
To avoid conflict before returning to the MIUI Camera:
- 🗑️ Remove GCam and clean its cache.
- 🔄 Reboot the phone.
- 📱 Reset permissions for the Camera app (Settings) → Annexes → Camera. → Permits → Drop it).
⚠️ Note: If you installed GCam via Magisk (modules like GCam Services Provider), turn off these modules before returning to the stock camera, otherwise. MIUI The camera may not work properly.