Owners of popular IP-The cameras often face a situation where you need to enter the password Xiaomi Yi, but the actual data is lost or forgotten, this can happen after buying a used device, a long break in operation or a malfunction in the software of the camera itself. Standard security procedures assume that the device comes with unique credentials, however, in a hurry, users often lose stickers or forget installed combinations.
In this article, we will take a closer look at all aspects of authorization in the Xiaomi Yi ecosystem, where to look for factory settings, how to restore access to the Wi-Fi module and what to do if you forget your password from the cloud service. Understanding these processes will allow you to avoid locking the device and regain full control of the video surveillance system.
It’s important to note that the approach to access recovery depends on whether you’re interested in local camera access, home network connection, or mobile app login, each of which requires a personalized solution and a sequence of actions.
Factory credentials and a sticker on the body
The first and most obvious source of information is the physical label on the device itself. The Xiaomi Home Camera or older Yi Dome models always have a barcode sticker and service information on them, and this is where the factory password is set up, which is valid until the user first shifts.
Usually the data is located on the bottom of the case or under the rotating mechanism of the dome camera. If the sticker is erased or has been removed, it is worth looking for the original packaging - often duplicate information is printed on the box. The standard data format includes the network SSID (for example, YI-DOME-xxxx) and the access code.
- 🔍 Look for the line “Password” or “Pwd” on the label – this is the code you want to use for your primary connection.
- 📦 Keep the box away from smart equipment for a warranty period, as it contains critical data.
- 📸 Take a photo of the sticker immediately after unpacking to have a digital (reserve) in case of loss of physical media.
Consider that password formats may vary across generations of devices, and early firmware versions often used generic combinations, whereas modern models generate a unique key for each instance, and the introduction of this mechanism has significantly improved the security of user data.
💡
Take a photo of the sticker on the back of the camera immediately after you buy it and save it in cloud storage, which will save you if the paper label is erased over time.
Resetting Wi-Fi Password and Reconnecting Camera
If the camera stops connecting to the router after changing the password from the home network or moving, a re-assignment procedure is required. In this context, the question "what password" refers to the credentials of your wireless Wi-Fi network, which you need to enter in the application to set up the camera again.
The process begins with a physical reset of the network settings on the device itself, which is why most Xiaomi Yi models have a hidden Reset button on their body, which can be located next to the microSD card jack or under a rubber plug on the bottom panel.
☑️ Algorithm resets Wi-Fi settings
Once the reset is activated, the camera goes into pairing mode, at which point it creates its own access point or waits for data to be transmitted via an ultrasonic signal (depending on the model), you will need to re-enter your router password in the Mi Home or Yi Home application interface.
⚠️ Warning: Make sure your smartphone and camera are in the zone of confident reception of the router signal (2.4 GHz) during setting up, otherwise the authorization process may be interrupted at step 99%.
Restoring access through the Mi Home app
Modern cameras are integrated into the Xiaomi ecosystem, and access control is often tied to the Mi Account account. If you forget the password to log in to the application, the recovery is not through the camera itself, but through the services of the manufacturer.
To return access, use the Forgot Password feature on the login screen. The system will prompt you to send a reset link to your linked email or confirmation code via SMS. This is a standard security procedure that protects your video stream from outsiders.
In some cases, especially when using older Yi Technology accounts, it may be necessary to migrate data to the new Mi Home app.If the camera was tied to a different acca-unt, the previous owner must remove the device from their list, otherwise access will be blocked.
- 📱 Use the recovery function via phone number if mail is not available.
- 🔗 Check if the camera is linked to another household member’s family account.
- 🌐 Make sure your internet connection is stable when requesting confirmation codes.
What if your phone is lost along with your account?
Administrative password and local area network
For advanced users using the camera as part of complex video surveillance systems (for example, via ONVIF or RTSP), the administrator password is important. By default, in many Xiaomi Yi models, it matches the Verification Code specified on the sticker.
However, the new firmware has been strengthened, and the first time you connect through a third-party software or browser (if the model supports a web interface), you may need to create a new administrator password, a step that you can not miss.
If you have changed this password before and forgotten it, resetting through the Reset button (holding more than 10 seconds) will return factory settings, including the administrator password, to the value indicated on the sticker.
| Parameter | Default value | Where to change |
|---|---|---|
| User (User) | admin | Immutable. |
| Password (Password) | Code from the sticker | Settings RTSP/ONVIF |
| Port (Port) | 80 / 554 | Network settings |
| Protocol | ONVIF / RTSP | Inclusion in the annex |
💡
The password to access via RTSP/ONVIF and the password to access Wi-Fi are two different things: the first one is for DVRs, the second one is for connecting the camera to the router.
Reset to factory settings (Hard Reset)
When none of the soft recovery methods work, the radical solution is a complete reset, which will put the Xiaomi Yi camera back out of the box by removing all user settings, including forgotten passwords and network configuration.
To perform Hard Reset, find the Reset hole. Depending on the model, the algorithm may be slightly different: on some devices, you need to press the button when the power is turned off, plug the power in while holding the button, and wait for the characteristic sound. On others, just press the button on the running device for 10-15 seconds.
The status indicator (LED) will start flashing yellow or orange, signaling the beginning of the formatting process. The camera will reset, and you will hear a voice greeting in Chinese or English (depending on the firmware version), indicating readiness for a new setup.
⚠️ Note: Full reset does not delete video recordings stored on a MicroSD card, but may need to be re-formatted through an application to properly operate the cyclic recording.
Typical errors when entering a password
Often the problem is not the forgotten code, but the technical details of the input. Xiaomi cameras are sensitive to the letter register and layout type, errors occur even in experienced users due to inattention to the details of the interface.
One common problem is confusion between similar characters, such as the number 0 (zero) and the letter O, or the number 1 and the letter l (L). In factory passwords, Xiaomi usually uses only numbers and lowercase letters, but rechecking will not be unnecessary.
Also, you should pay attention to the input language. Make sure that the smartphone is active in English layout, even if the password consists only of numbers. Some keyboards automatically substitute extra characters or spaces at the end of the line, which leads to an authorization error.
- ⌨️ Always check the keyboard layout before pressing the "Confirm" button".
- 🚫 Avoid using autocomplete (autocorrection) that may distort the access code.
- 👁️ Turn on the display of the password (eye in the input field) to visually check the entered characters.
If you use third-party programs to view the stream, make sure that the password field does not erase the extra string translation symbol, which is sometimes copied along with the text from the clipboard.