How to remove the lock screen Xiaomi Redmi

Modern Xiaomi Redmi smartphones offer many ways to protect personal data, but sometimes this protection becomes unnecessary. Users often wonder how to remove the lock screen Xiaomi Redmi to make it easier to access the device. This can be caused by forgetfulness, when the owner does not want to enter a pin code every time, or the desire to hand the phone to the child without the risk of accidental locking.

The procedure for disabling protection does not require complex hardware, but requires attention to the details of the MIUI or HyperOS system. Depending on the model and version of the operating system, the menu may vary slightly, but the logic of actions remains the same for the entire family of devices. Below we will discuss in detail the algorithms for the different types of unlock.

Preparing the device for security changes

Before you start to completely disable protection, you need to make sure you have access to the current settings.Removal of the lock screen is only possible if you know the current password or pattern lock. Android security system will not allow you to change the lock settings without first authorizing the owner.

It’s also worth checking if your Mi Account is linked to your device, as some security settings can be synced to the cloud. If you plan to completely remove protection, make sure your phone doesn’t store critical information that anyone who picks up the gadget can access.

⚠️ Warning: Disabling your password makes your personal data, photos and correspondence available to anyone who unlocks the screen.

It is recommended to back up important data in advance. Although the process of disabling the password does not delete files, any manipulation of the system security settings carries minimal risk of failure.

Disabling password and pattern lock in settings

The main method of removing protection is to use the standard settings menu. → Passwords and security → Device protection. This is where all the parameters that make access to the desktop are.

Once logged in, the system will require you to enter your current password, pin, or draw a graphical key, which is a mandatory measure of confirming that the action is being performed by the owner, and after successful authorization, a list of active unlocking methods will open.

To disable the protection, perform the following actions:

• 📱 Click on the “lock screen” or “password” item at the top of the list.
• 🔑 Enter the current access code again to confirm the operation.
• 🗑️ Select the option “Delete password” or “Disable” in the menu that appears.
• ✅ Confirm the action by agreeing to the safety warning.

After this manipulation, the smartphone will be unlocked by a simple swipe across the screen. If you use a pattern lock, the procedure is identical: the system will ask you to draw the current key, and then prompt you to delete it.

Working with biometrics: Face ID and fingerprint

Many Xiaomi Redmi users use biometrics for quick access. However, removing the lock screen completely, leaving only Face ID, is impossible on most versions of MIUI. Android requires a backup method of protection (password or key) in case of a biometric failure.

You can delete the biometrics themselves so that the phone doesn't respond to your face or finger. Go to Settings → Passwords & Security → Unlock by fingerprint (or facial recognition).

If your goal is to make sure the phone doesn't ask for unlock at all, you still have to set and then delete the master password first, as described in the previous section.Biometry is only an addition, not a replacement, to the primary method of protection.

Removing Protection Through Safe Mode and Debugging

In the rare cases where a standard menu is not available due to system errors, you can try using USB debugging mode. This method is more complex and requires a computer. It allows you to control the device through ADB commands, but it often requires access to the menu to activate it.

If you have previously enabled USB debugging, you can try to reset security settings via the command line. However, modern versions of Android block deleting the screen password through ADB without root rights.

To enter safe mode, which sometimes helps to bypass the blocked processes:

• 🔄 Press and hold the power button.
• 🖐️ When the off menu appears, press and hold your finger on the "Stop" item».
• 📉 In the window that appears, select “OK” to go to Safe Mode.
• 🔍 In this mode, third-party screen blockers do not work, which may allow you to remove them.

It should be noted that the regular system blocker does not turn off this way. Safe mode is only useful if a third-party application that simulates the lock screen creates a problem.

Comparison of Unlocking Methods on Redmi

Different Redmi models and firmware versions may offer different protection options, and understanding the differences will help you choose the best option or completely abandon them.

As you can see from the table, there are no completely "safe" and at the same time "uncomfortable" methods. When you remove the lock screen, you sacrifice privacy for speed. PIN-code instead of a complex password, but complete lack of protection is rare.

⚠️ Note: When you reset your settings to the factory (Hard Reset) all data will be deleted, but protection will be provided. FRP (Google Accounts will remain.If you don't know the password from your Google account, your phone will turn into a brick».

What to do if you forget your password

If you want to remove the lock screen because you forgot your password, you don't get to do it, and you don't get to unprotect the default settings, and the only way out is to completely reset the device to the factory settings.

You need to go to the Recovery menu. On most Xiaomi smartphones, this is done by turning off the phone and then pressing the power button and the volume button. You need to select Wipe Data from the Recovery menu.

This process is irreversible:

Wipe Data → Wipe All Data → Confirm → Reboot

Once rebooted, the phone will be like new, without passwords, but without your data. If the device has enabled Find Device, you will need to enter a password from a Mi Account or Google account that was synced earlier, which is anti-theft protection that can not be avoided by a simple reset.

💡

If you often forget passwords, write them down to a secure location or use password managers synced with Google’s cloud to be able to recover.

Frequent problems with disabling protection

Users may experience a situation where the password deletion button is inactive, which often happens when a device has corporate application security certificates or work profiles set up, in which case the system compulsorily requires a password.

The problem may also be the device administrator rights. Some applications (antiviruses, bank clients) may request administrator rights and require a lock screen. Check the list of administrators in Settings → Passwords and Security → Privacy → Special Access Rights → Device administrators.

If you disable admin rights for a suspicious application, the ability to remove the lock screen may return. Carefully study which applications have access to device management.

💡

The inability to delete a password is most often caused by active administrator rights from third-party applications or corporate security policies.

Questions and Answers (FAQ)