Xiaomi 120W charging: a complete list of supported phones (2026)

Xiaomi’s 120W ultrafast charging technology has become one of the brand’s key competitive advantages, allowing you to charge your smartphone’s battery to 100% in less than 20 minutes. But not all of the company’s devices support this standard — it’s only available in flagship and some sub-flagship models. If you’re looking for a phone with the highest charging speed, it’s important to get to the nuances of everything from adapter compatibility to battery features.

In this article, we will not only list all the current Xiaomi, Redmi and POCO smartphones with support for 120W, but also reveal the technical details: how this technology works, what risks it carries to the battery, and why some models limit power at a low charge level.

How 120W charging works in Xiaomi smartphones: technology and limitations

The ultra-fast 120W charging in Xiaomi devices is based on proprietary HyperCharge technology, which combines high voltage (up to 20V) with intelligent current control. Unlike standard solutions (like Quick Charge 4+ or PD 3.0), it uses a dual battery: the battery is physically divided into two cells that are charged in parallel. This reduces heat and increases speed.

But there are important nuances:

• 🔋 Temperature limit: when heated above 40°C power is automatically reduced to 30W–60W safe.
• ⚡ Adaptive algorithm: in the first 5 minutes, charging is at maximum power, then gradually decreases (for example, after 80%, the speed drops 2-3 times).
• 🔌 Cable Requirements: Original Cable with Support 6A (routine USB-C cables can only withstand 3A and may overheat).

Important: Xiaomi claims that HyperCharge technology retains 80% of battery capacity after 800 charging cycles (versus 500-600 for standard batteries). 120W-Charging capacity can drop faster – especially if you constantly charge your phone to 100%.

Full list of Xiaomi, Redmi and POCO smartphones with support for 120W

At the time of 2026, the 120W technology is available only in top-end Xiaomi and Redmi models. None of the POCO brand’s smartphones yet support this power – the maximum charging in their lineup is limited to 67W (POCO F6 Pro).

⚠️ Attention: Xiaomi models 11T Pro and Xiaomi 11 Ultra, despite the stated support 120W, In real life, they rarely achieve this power because of software constraints, 11T Pro in Europe comes with firmware blocking charging above 67W.

💡

Before buying, check the regional version of the phone! For example, the global Xiaomi 13T Pro models only support 67W, whereas the Chinese models only support the full 120W.

Can I use it? 120W-Xiaomi charging for other phones?

The original Xiaomi 120W power supplies (MDY-12-ED or GA120 models) are compatible with other devices, but there are critical limitations:

• 📱 Other brands: Samsung, iPhone or OnePlus will not be able to use full power – the maximum speed will be limited by their own protocols (for example, the maximum speed will be limited by their own protocols, 25W Galaxy S23).
• 🔋 Xiaomi devices with less power: for example, Redmi Note 11 Pro+ (67W) It will charge faster but will not exceed the manufacturer’s limit.
• ⚡ Laptops and tablets: You can connect a MacBook Air or iPad Pro, but power 120W It will only be enough for slow charging (in fact, the unit will work as a slow charger). 60W).

🔴 Critical point: Use of non-original cables with adapter 120W may cause the swelling to overheat. USB-C In 2023, Xiaomi recalled a batch of cables from third-party manufacturers because of the risk of fire in high currents.

How to check the real charging speed on Xiaomi 120W

The claimed 120W is often not achieved due to external factors. To find out the real power, use one of the methods:

1. Hidden Engineering Menu: Enter ##4636## in the Phone app, then go to Battery Information. This shows the current current and voltage. Multiply the values (e.g. 6.5V×5A=32.5W) — that's the real power.
2. Monitoring apps: Install AccuBattery (Play Market) or AIDA64. They show real-time charging graphs. Note: the first 2-3 minutes of power can jump from 80W to 120W, which is normal.
3. Stopwatch test: Discharge the phone to 1%, connect the original charger and record the time to 100%. If the process took more than 25 minutes, then the power is limited (possible reasons: unoriginal cable, high temperature or regional firmware restrictions).

⚠️ Note: If your Xiaomi 13 Pro is below the power 60W When connecting the original adapter, check the settings: go to Settings → Battery → Charging settings and disable Optimized Charging option (it artificially slows down speed to save battery).

Use the original cable and adapter | Disable battery optimization in settings | Charge at 20-30°C | Check the firmware version (update if necessary) | Use the monitoring application (AccuBattery)

-->

Comparison of 120W and alternative charging technologies

Despite its record speed, the 120W is not always justified in everyday use.

💡 Conclusion: 120W It is justified if you are critical speed (for example, for frequent trips). 67W–80W — This will reduce the load on the battery and extend its life. 67W It charges up to 100% in 40 minutes, but the battery lasts 20% longer than the 13 Pro with a battery. 120W.

💡

If you rarely discharge your phone to 0% and take your time, it’s best to turn it off. 120W-charging in settings and use the mode 30W–60W. This will extend the life of the battery by 30-40%.

Top.-3 myth 120W-Xiaomi charging: what is true and what is not

There's a lot of rumors going around 120W, and we're going to look at some of the most common ones.

1. Myth 1: "120W-The battery kills the battery in six months" 🔍 Reality: Yes, high currents accelerate degradation, but not critically. If used correctly (not to charge after 100%, avoid overheating), capacity will drop to 80% in 2-3 years, like most flagships!
2. Myth 2: You can charge any Xiaomi to 120W, if you buy an adapter" 🔍 Reality: No! Power is limited by the power controller in the phone itself. For example, the Redmi Note 10 Pro is physically unable to take more. 33W, even with an adapter 120W.
3. Myth 3: “Recharging 120W dangerous - can explode" 🔍 Reality: Explosions are unlikely due to layered protection (thermosulators, current control). However, there have been cases of connectors melting using uncertified accessories. Xiaomi's original adapters and cables are undergoing security tests.

📊 Interesting fact: In the laboratory tests Xiaomi 12S Ultra with 120W It was charged to 50% in 7 minutes, but the battery temperature rose to 45.°C. For comparison, when charging 30W heating not exceeding 35°C.

How to prolong battery life when using 120W-charging

To minimize battery wear, follow these recommendations:

• 🔄 Don't charge to 100%: Turn off power by 80-90%, which will reduce the load on the cells and extend the life of 30%.
• ❄️ Avoid extreme temperatures: Do not charge your phone in the sun or in temperatures below 0°C. Optimal range: 10–35°C.
• 🔌 Use original accessories: Xiaomi cables and adapters have built-in security controllers. Third-party accessories may not properly match voltage.
• 📉 Turn off optimization in settings: In the Settings menu → Battery deactivate the option Adaptive charging – it artificially slows down the process.

⚠️ Warning: If you notice that the phone is running out quickly (e.g., from 100% to 0% in 4-5 hours with moderate use), check the battery status in AccuBattery.Battery value below 70% - a signal to replace the battery.

💡

Turn on Power Saving Mode at 20% charge level in the settings, which will reduce battery load and prevent deep discharge, which is especially harmful to lithium polymer batteries.

FAQ: Frequent questions about 120W-charging Xiaomi