How to turn off turbocharging on Xiaomi Redmi Note 10: 5 proven ways

Why do Redmi Note 10 owners want to turn off turbocharging?

Xiaomi Redmi Note 10 is equipped with the technology of fast charging Power Delivery 3.0 (up to 33 watts depending on the modification), which allows you to restore battery power to 50% in just 30 minutes. However, not all users are happy with this feature. The main reasons for wanting to turn off turbocharging are overheating the device, accelerated battery wear and unstable operation when using non-original chargers.

The manufacturer claims that modern lithium-polymer batteries are designed for hundreds of cycles of fast charging, but practice shows that when you use turbo mode, the battery capacity can decrease by 15-20% faster than with standard charging. In addition, many note that the Redmi Note 10 smartphone is very heated in the camera and processor, which creates discomfort when playing or watching video while recharging.

In this article, we’ll look at all the available ways to disable turbocharging, from standard settings to hidden engineering menus, and the risks of turning off fast charging and how it will affect battery life.

Method 1: Disconnect via Xiaomi’s standard settings

The easiest and safest method is to use the built-in MIUI options. Unfortunately, in the latest firmware versions for the Redmi Note 10, the direct option to disable turbocharging may not be available, but it can be found in the battery section:

1. Open Settings → Battery and Performance.
2. Go to Battery Settings (or Charge depending on the MIUI version).
3. Find the Fast Charging or Turbo Charging item and move the slider to the Off position.

If there is no such item, try an alternative path:

• 🔋 Settings → Additionally. → Charging features.
• 🔌 Enable Normal Charging Mode (if available).

💡

If you don’t have an option, upgrade to the latest version of MIUI – in new builds, Xiaomi sometimes returns hidden settings.

⚠️ Note: On some firmware, disabling turbochargers through menus may be reset after rebooting.

Method 2: Use the engineering menu (code ##4636##)

The hidden engineering menu allows you to manage charging options that are not available in the standard interface.

1. Open the Phone app.
2. Enter the combination: ##4636###.
3. In the menu that appears, select Battery Information.

Here you'll see the current charging parameters, including voltage and current, to limit power:

• 🔧 Find a point. AC Charge Limit or Fast Charge Config.
• 📉 Set the value 5V/2A (standard charger instead 9V/3A or 11V/3A.
• 🔄 Save the settings and restart the smartphone.

⚠️ Warning: Incorrect changes to the engineering menu can lead to unstable charging or even damage to the power controller.

Method 3: Applications for charging control (AccuBattery, Battery Charge Limit)

If standard methods don't work, third-party utilities will come to the rescue, two of the most popular charging management apps:

Instructions for AccuBattery:

1. Install the application and provide all necessary permissions.
2. Go to the Charging section → Current restriction.
3. Set the maximum current value at 1000-1500 mA (instead of the standard 3000-4000 mA in turbo mode).
4. Activate the Warning option for fast charging.

Turn off battery optimization for the application in MIUI settings

Turn on the display of notifications about the charging current

Calibrate the battery in the application 1 time per month

Do not use ultrafast charging (if any) at the same time as limiting current.

-->

⚠️ Note: Applications without root rights may incorrectly reset restrictions after rebooting. Stable operation will require unlocking the bootloader and obtaining root.

Method 4: Disconnect via ADB (for advanced users)

If you're ready to work with Android Debug Bridge (ADB), you can turn off system-level turbocharging, a method that requires connecting your smartphone to your PC and basic command line knowledge.

Steps:

1. Activate Developer Mode: Go to Settings → About Phone. Tap 7 times on MIUI Version.

USB debugging

Settings → Additional → For Developers

Command Prompt

adb shell


settings put global fast_charge_enabled 0

To return the turbocharger, use:

settings put global fast_charge_enabled 1

💡

ADB-- Temporary commands! - After resetting or updating MIUI parameters will be reset to the factory.

⚠️ Attention: Misuse of the right ADB It can cause data loss or system failure.Before experimenting, make a backup through Settings → System system → Backup.

Standard settings MIUI|Engineering menu|Annex side (AccuBattery)|ADB-team|I didn't turn it off, I use it as it is.-->

Method 5: Physical restriction (use of weak charger)

If the software methods don't work, you can go around the corner and use a charger with less power.

• 🔌 Charging. 5W (5V/1A): Standard. USB-port from an old PC or laptop.
• 🔋 Charging. 10W (5V/2A): A conventional charger from smartphones 2015–2018 year-end.
• ⚡ Charging. 18W (9V/2A): Moderate option - faster 10W, but slower than turbo.

Advantages of the method:

• ✅ No changes in smartphone settings are required.
• ✅ Safe for the battery (less heating).
• ✅ You can quickly return to turbocharging by simply changing the adapter.

Disadvantages:

• ❌ Charging time increases by 2-3 times.
• ❌ Some adapters may not be recognized by Redmi Note 10 (compatibility checks are required).

💡

Use USB-IF certified cables – cheap wires can limit current even with a powerful adapter.

Pros and cons of turning off turbocharging on the Redmi Note 10

Before making a decision, weigh the pros and cons:

💡 Conclusion: Turning off turbocharging is advisable if you:

• 🔋 Use your smartphone for more than 2 years and notice a deterioration in capacity.
• 🔥 You experience a lot of heat when charging.
• ⏳ Waiting longer to save the battery.

If you are interested in speed and you change your smartphone every 1-2 years, you can leave it turborek – modern Xiaomi batteries are designed for such loads.

Frequent Questions (FAQ)